Name your own Sprint Run!
Re: Name your own Sprint Run!
Someone suggested a light blue Dragonfly last week. I thought it would be perfect with an FFG PE LC200N blade.
Top of the list for me is a maxamet yojimbo 2
Top of the list for me is a maxamet yojimbo 2
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: Name your own Sprint Run!
1) A smurf blue G10 Manix Backlock in M390.
2) A dark green G10 Stretch with 204P.
3) An all titanium R.I.L. PM2 with Maxamet.
:D
2) A dark green G10 Stretch with 204P.
3) An all titanium R.I.L. PM2 with Maxamet.
:D
Josh
Re: Name your own Sprint Run!
OK.. Stag scales, Pingo, no change to clip, and a Damascus steel blade..
"You never know what lonesome is, 'til you get to herdin' cows"
- captnvegtble
- Member
- Posts: 1058
- Joined: Tue Oct 06, 2009 10:20 am
Re: Name your own Sprint Run!
Temperance 2 (Fixed Blade) in either Hap40 or SuperBlue
Re: Name your own Sprint Run!
I'm sounding like a broken record :
Centofante 3 with ZDP189 and British Racing Green FRN, no jimping.
I'll add the following to the wishlist :
Dark green linerless G10 UKPK (with the 2.5mm blade stock) and S30V / S35VN to keep the price reasonable (I think the previous G10 UKPKs had 3mm blades?)
Centofante Memory without the blue anodising and a shred carbon fibre onlay.
Centofante 3 with ZDP189 and British Racing Green FRN, no jimping.
I'll add the following to the wishlist :
Dark green linerless G10 UKPK (with the 2.5mm blade stock) and S30V / S35VN to keep the price reasonable (I think the previous G10 UKPKs had 3mm blades?)
Centofante Memory without the blue anodising and a shred carbon fibre onlay.
Re: Name your own Sprint Run!
Sage 1, M4 or maxamet, black G10, solid clip. I'll take care of the rest.
Re: Name your own Sprint Run!
To meet requirements of op, fluted Ti R.I.L. Millie with LC200N blade. With "tweaks" Mantra 2 XL, 4" LC200N blade, bronze washers.
Re: Name your own Sprint Run!
Well done!Tdog wrote:To meet requirements of op, fluted Ti R.I.L. Millie with LC200N blade. With "tweaks" Mantra 2 XL, 4" LC200N blade, bronze washers.
Wishlist: Delica 4 FFG VG10, Manix 2 LW XHP, Military 204P and S110V, Para 3 Cruwear and S110V, Paramilitary 2 (all versions), SpydieChef LC200N, Caribbean PE and Sheepsfoot SE
Procured: Caly 3.5 VG10, Dragonfly 2 LW VG10, Manix 2 XL S30V, Native 5 LW S110V, Para 3 S30V, Paramilitary 2 S110V
Procured: Caly 3.5 VG10, Dragonfly 2 LW VG10, Manix 2 XL S30V, Native 5 LW S110V, Para 3 S30V, Paramilitary 2 S110V
- chuck_roxas45
- Member
- Posts: 8776
- Joined: Wed Mar 03, 2010 5:43 pm
- Location: Small City, Philippines
Re: Name your own Sprint Run!
Military in 52100...
Oh wait...
:D
Oh wait...
:D
Re: Name your own Sprint Run!
Bolstered Persian, bladesteel = Bifrost Damasteel, Ringed Gidgee covers with no lanyard tube nor pocket clip.
What is truth? Pontius Pilate
Re: Name your own Sprint Run!
Bob Lum tanto in K390 or SB or a caly in K390
Re: Name your own Sprint Run!
1. Military Fluted CF Titanium R.I.L M390 Steel :eek:
2. PKal in S110V, CF Scales :p
3. Lil'Temp 3 Gray FRN VG-10 Steel with pocket clip is not coated :)
2. PKal in S110V, CF Scales :p
3. Lil'Temp 3 Gray FRN VG-10 Steel with pocket clip is not coated :)
- The Mastiff
- Member
- Posts: 5951
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Re: Name your own Sprint Run!
There's a lot of knives I'd buy in this thread.
I'll go with a 10V Manix back lock.
Cruwear or 4V Manix back lock
Titanium Endura with HAP 40 or something more in Cruwears range.
I'll go with a 10V Manix back lock.
Cruwear or 4V Manix back lock
Titanium Endura with HAP 40 or something more in Cruwears range.
Re: Name your own Sprint Run!
.
Last edited by 017 on Mon Jul 09, 2018 4:13 am, edited 1 time in total.
Re: Name your own Sprint Run!
Superleaf in HAP40 with red weave carbon fiber scales and a more substantial pocket clip
Re: Name your own Sprint Run!
As far as dream sprints go, I'd have to buy pretty much any sprint of the Lefty Millie or PM2. I know it's unlikely, but whatever. :) So many great sprint options for those two, but I don't have any because I know I won't carry them over my lefties.
A new g10 UKPK would be sweet, peel ply cf or dark gray g10 and 52100 maybe? Frn sprints would also be cool, I could probably think of at least a dozen combos I'd be excited about.
Another sprint I've wanted for a long time is a micarta Chaparral. Again, lots of possible color and steel options would please me.
Sprints of the linerless back lock Manix need to happen asap, because I decided to hold off for a sprint to buy one. :p Forest green and 204p or dark gray and cruwear would be awesome and help make up for the righty model sprints I don't have. Maybe a true navy blue g10?
A new g10 UKPK would be sweet, peel ply cf or dark gray g10 and 52100 maybe? Frn sprints would also be cool, I could probably think of at least a dozen combos I'd be excited about.
Another sprint I've wanted for a long time is a micarta Chaparral. Again, lots of possible color and steel options would please me.
Sprints of the linerless back lock Manix need to happen asap, because I decided to hold off for a sprint to buy one. :p Forest green and 204p or dark gray and cruwear would be awesome and help make up for the righty model sprints I don't have. Maybe a true navy blue g10?
:spyder:
Re: Name your own Sprint Run!
PPT with Titanium scales RIL and m4/204p/cruwear.
Re: Name your own Sprint Run!
Spyderco Renegade
Radiused CF scales
Made in Golden with a snappy back lock
Steel? Something stainless. :spyder:
Radiused CF scales
Made in Golden with a snappy back lock
Steel? Something stainless. :spyder:
My response is "Just because you can't see it, doesn't mean it isn't there, it just means you can't see it". Sal G.
Re: Name your own Sprint Run!
Hey dude!! I want a C-60 Ayoob Sprint Run so bad and I would even go ahead and accept what you just suggested. However I want to go a step beyond that idea. I want a plain edged C-60 Ayoob model with M390 blade steel and with either a G-10 handle or even a Titanium alloy handle. A Spyderedged version of the C-60 would be super cool with XHP or LC200N blade steel with nuclear Yellow G-10 scales.twinboysdad wrote:
2. Ayoob, LC200 serrated and FRN scales with the Salt hardware
Now in the fixed blade sector I would like to see the original TEMPERANCE 1 model in either LC200N or H-1 and make them in PE & SE both. OK Spyder factory you got your order :D
-
- Member
- Posts: 12640
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: Name your own Sprint Run!
Ahh....yes! +1 for the HAP40 version :Dcaptnvegtble wrote:Temperance 2 (Fixed Blade) in either Hap40 or SuperBlue