I don't know about that. Have you seen The Deacon in a bikini? :pzhyla wrote:I think both Deacon and JD should be models.
To Honor?
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: To Honor?
Re: To Honor?
No, but I heard on good authority, that when Paul wears his Odin's Eye bikini, his confidence is bolstered... :Djabba359 wrote:I don't know about that. Have you seen The Deacon in a bikini? :pzhyla wrote:I think both Deacon and JD should be models.
Re: To Honor?
I think me and Paul have very different taste in knives. If I suggest anything, just throw it in the garbage. :)
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
Re: To Honor?
I love this thread! Looking forward to hearing Paul weigh in :)
Re: To Honor?
In 20 years if you're still doing this and you get to my turn... g-10 Hawkbill flipper with a nice high speed tool steel and a compression lock. I'll wait. :D
*edit* BTW this is a very cool thing that you are doing Sal. The sense of community here is why I keep coming back.
*edit* BTW this is a very cool thing that you are doing Sal. The sense of community here is why I keep coming back.
Last edited by ZrowsN1s on Fri Nov 25, 2016 3:35 pm, edited 1 time in total.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
- Larry_Mott
- Member
- Posts: 2589
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: To Honor?
I was just thinking "When it is my turn to be an inventory of the forums there will probably be a Spyderco light sabre in the makings" :)
As for now i think the honoree should provide the design, within constructable limits.
I would make it the seventeenth Kopa or a Spyderco take on the D. LeMaire thumbwheel opened knife if it were me :)
As for now i think the honoree should provide the design, within constructable limits.
I would make it the seventeenth Kopa or a Spyderco take on the D. LeMaire thumbwheel opened knife if it were me :)
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
- zenheretic
- Member
- Posts: 7545
- Joined: Sun Jul 03, 2005 8:47 am
- Location: USA, Earth
Re: To Honor?
For the love of God, no Boye Dent on the Deacon model!
Since anything is possible in world of ideas, the handles should be modular, with at least 3 different handles materials that can be easily switched out. One would a steel for acid etching, or engraving; one would be a bone; and one would be a paper micarta...
Since anything is possible in world of ideas, the handles should be modular, with at least 3 different handles materials that can be easily switched out. One would a steel for acid etching, or engraving; one would be a bone; and one would be a paper micarta...
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: To Honor?
I think it's a cool idea, and I think for Paul it would need bolsters, natural material scales, pinned construction, ambidextrous lock and no clip. Maybe a bigger Kopa, although I think of Paul every time I see a Kiwi.
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: To Honor?
I agree with others, sal, this is an absolutely excellent idea!
I think the upcoming Fish Hunter is a worthy one of note for Surf Gringo, made in his honor :)
I think the upcoming Fish Hunter is a worthy one of note for Surf Gringo, made in his honor :)
Re: To Honor?
This and maybe include some engraving on the bolsters.yablanowitz wrote:I think it's a cool idea, and I think for Paul it would need bolsters, natural material scales, pinned construction, ambidextrous lock and no clip. Maybe a bigger Kopa, although I think of Paul every time I see a Kiwi.
I'm pretty sure that the Deacon has mentioned in his 23 odd THOUSAND posts what his ultimate knife was, so we just need a volunteer to do a search.... :eek: :p
- SpyderNut
- Member
- Posts: 8431
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Re: To Honor?
This sounds like a lot of fun, Sal. Very cool idea. :)
I agree with Paladin, Spydergirl88 and a few others: For Paul's knife, I would think a special custom version of the New Stretch II would be very apropos. He greatly enjoys the custom Stretch you gave him several years ago (the one with wooden scales and bolsters, sans clip).
Perhaps this Stretch could be made to match one of his other favorite custom Spyderco designs, the stag Kiwi? That would be exceptionally cool and I know several of us would also LOVE to have a stag Stretch with SS or even Ti bolsters for our own collections.
Take care,
-Michael
I agree with Paladin, Spydergirl88 and a few others: For Paul's knife, I would think a special custom version of the New Stretch II would be very apropos. He greatly enjoys the custom Stretch you gave him several years ago (the one with wooden scales and bolsters, sans clip).
Perhaps this Stretch could be made to match one of his other favorite custom Spyderco designs, the stag Kiwi? That would be exceptionally cool and I know several of us would also LOVE to have a stag Stretch with SS or even Ti bolsters for our own collections.
Take care,
-Michael
:spyder: -Michael
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
-
- Member
- Posts: 727
- Joined: Tue Jan 04, 2011 4:57 pm
- Location: Indiana
Re: To Honor?
Sal, this is a stellar idea.
And I agree with several above...a Kopa or Kiwi, natural scales, bolsters, clipless.....
And we need video when it is delivered to its namesake.....Have to see the look on his face. :cool: :D
And I agree with several above...a Kopa or Kiwi, natural scales, bolsters, clipless.....
And we need video when it is delivered to its namesake.....Have to see the look on his face. :cool: :D
- chuck_roxas45
- Member
- Posts: 8776
- Joined: Wed Mar 03, 2010 5:43 pm
- Location: Small City, Philippines
Re: To Honor?
Hmmm let's just call it a curmudgeon...
Haha joking. Great idea Mr. G.
Haha joking. Great idea Mr. G.
- zenheretic
- Member
- Posts: 7545
- Joined: Sun Jul 03, 2005 8:47 am
- Location: USA, Earth
Re: To Honor?
hahahahachuck_roxas45 wrote:Hmmm let's just call it a curmudgeon...
Haha joking. Great idea Mr. G.
Re: To Honor?
I don't have much to add other than I would love to see this idea materialize. Seeing some of the unique Spydies from Deacon's collection, I know I'd be all over the design.
The problem of a coherent civilization is the problem of living with ignorance and not being frustrated by it.
- Pinetreebbs
- Member
- Posts: 1833
- Joined: Sat Jun 26, 2010 6:55 am
- Location: SC
Re: To Honor?
That is a great idea and "The Deacon" is a great name for a knife. Scale inserts and a wood sided Stretch sound like two important design suggestions. I would defer to a professional for the actual design. A camel is a fine animal, but it is what a horse would be if designed by a committee.
Have you joined Knife Rights yet?
Go to: http://www.KnifeRights.org
Protecting your Right to own and carry the knives YOU choose.
Go to: http://www.KnifeRights.org
Protecting your Right to own and carry the knives YOU choose.
Re: To Honor?
Deacon's ideal knife:
-superblue steel
-bright colored g10 with screwed on bolsters
-liner lock
-right hand non-removable pocket clip
-superblue steel
-bright colored g10 with screwed on bolsters
-liner lock
-right hand non-removable pocket clip
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
- The Mastiff
- Member
- Posts: 5951
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Re: To Honor?
With Paul it must be stainless and left handed. Practical too. Other than that maybe it should catch his eye somehow , but be balanced overall. This is an interesting topic. We will see how we really know Paul and how well we think we know him. I can't say for sure which lock he chooses but I'd lean towards mid back lock with no Boye dent. 2 3/4th inch to 3 1/4th inch blade. My guesses anyhow.
Joe
Joe
Re: To Honor?
Does "the Deacon" have a pocket clip? I am guessing no.
Stainles for certain, bolsters seem a must, and a mid back lock without a dent as others have mentioned.
Stainles for certain, bolsters seem a must, and a mid back lock without a dent as others have mentioned.