HAP 40 Endura to be clad or solid blade?
-
twinboysdad
- Member
- Posts: 3894
- Joined: Tue Mar 26, 2013 6:23 pm
HAP 40 Endura to be clad or solid blade?
not sure if ever clarified, and I am in either way. Hoping for solid blade
- bearfacedkiller
- Member
- Posts: 11522
- Joined: Sat Jan 04, 2014 12:22 pm
- Location: hiding in the woods...
Re: HAP 40 Endura to be clad or solid blade?
I would have to search for it and I am at work right now ( working hard obviously :) ) but I believe it has been stated that it will be laminated. San Mai is very popular in Japan so I believe that stock is readily available.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: HAP 40 Endura to be clad or solid blade?
Hope laminated.With Vg10 :D
Re: HAP 40 Endura to be clad or solid blade?
I wouldn't mind solid but for a folder I think laminated would make most sense.
Re: HAP 40 Endura to be clad or solid blade?
from viewtopic.php?f=2&t=62796&start=40" onclick="window.open(this.href);return false;sal wrote:I've been testing an Endura with a HAP40 blade (laminated) for a few days. We'll CATRA test tomorrow. Pretty awesome stuff.
sal
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
-
twinboysdad
- Member
- Posts: 3894
- Joined: Tue Mar 26, 2013 6:23 pm
Re: HAP 40 Endura to be clad or solid blade?
I would skip coffee just to know the handle color
-
SpyderNut
- Member
- Posts: 8432
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Re: HAP 40 Endura to be clad or solid blade?
Yes indeed. I would too. :) Here's hoping for burnt orange FRN!twinboysdad wrote:I would skip coffee just to know the handle color
Re: HAP 40 Endura to be clad or solid blade?
i think it has to be burnt orange, i've never seen so many people agree on the same handle colour
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Re: HAP 40 Endura to be clad or solid blade?
Well there is a poll for the handle color and only 3 people voted burnt orange, my choice was teal but I think a lot more people should vote in general!
http://www.spyderco.com/forumII/viewtop ... =2&t=67106" onclick="window.open(this.href);return false;
Sorry, this poll is just for the UKPK sprint, got confused with another one with FRN color options..
http://www.spyderco.com/forumII/viewtop ... =2&t=67106" onclick="window.open(this.href);return false;
Sorry, this poll is just for the UKPK sprint, got confused with another one with FRN color options..
- SpeedHoles
- Member
- Posts: 3365
- Joined: Thu Jan 15, 2015 10:53 am
- Location: Mitten
Re: HAP 40 Endura to be clad or solid blade?
I'll try some out either way, but laminated sounds cool! :)
Going back to Caly.
- bearfacedkiller
- Member
- Posts: 11522
- Joined: Sat Jan 04, 2014 12:22 pm
- Location: hiding in the woods...
Re: HAP 40 Endura to be clad or solid blade?
I am all over a Delica when they drop. This looks interesting to me and the color doesn't matter. It could be the color of pea soup and I would buy one. 
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- SpeedHoles
- Member
- Posts: 3365
- Joined: Thu Jan 15, 2015 10:53 am
- Location: Mitten
Re: HAP 40 Endura to be clad or solid blade?
bearfacedkiller wrote:I am all over a Delica when they drop. This looks interesting to me and the color doesn't matter. It could be the color of pea soup and I would buy one.
Wait a minute... isn't that the color of your D2 Para?
I like it.
Going back to Caly.
- bearfacedkiller
- Member
- Posts: 11522
- Joined: Sat Jan 04, 2014 12:22 pm
- Location: hiding in the woods...
Re: HAP 40 Endura to be clad or solid blade?
Yeah, pretty much. Green is my favorite color so that wasn't the best example. I would actually be excited if it was that color. The current foliage green frn is quite a bit different than the foliage green G10. I prefer the G10 color much more.SpeedHoles wrote:bearfacedkiller wrote:I am all over a Delica when they drop. This looks interesting to me and the color doesn't matter. It could be the color of pea soup and I would buy one.
Wait a minute... isn't that the color of your D2 Para?
I like it.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: HAP 40 Endura to be clad or solid blade?
We received a sample today of the color. Burnt orange and very nice.
sal
sal
Re: HAP 40 Endura to be clad or solid blade?
sal wrote:We received a sample today of the color. Burnt orange and very nice.
sal
Endura now?? Delica to follow??? John :)
Not all who wander are lost!!!
Of all the paths you take in life...
Make sure some of them are Dirt!!!
Of all the paths you take in life...
Make sure some of them are Dirt!!!
- bearfacedkiller
- Member
- Posts: 11522
- Joined: Sat Jan 04, 2014 12:22 pm
- Location: hiding in the woods...
Re: HAP 40 Endura to be clad or solid blade?
Burnt Orange scales!!! Woot!!! Woot!!!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: HAP 40 Endura to be clad or solid blade?
Awesome, can't wait to add another FRN Delica to the stable!
-
twinboysdad
- Member
- Posts: 3894
- Joined: Tue Mar 26, 2013 6:23 pm
Re: HAP 40 Endura to be clad or solid blade?
sal wrote:We received a sample today of the color. Burnt orange and very nice.
sal
As the guy who bugged you to make an FRN follow up to the Superblue run, I can't tell you how excited I am. From you saying yes, to the group coming up with HAP 40 and you approving, to finding out it is burnt orange. Marketing professors could teach classes on your business model. Let me be the first to tell you thank you for letting us all taste HAP 40 and for listening to your customer base.
-
SpyderNut
- Member
- Posts: 8432
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Re: HAP 40 Endura to be clad or solid blade?
This is indeed very good news! Thank you, Sal.