Re: Dragonfly - show the love!
Posted: Thu May 27, 2021 5:45 pm
Spyderco Forums
Dragonfly - show the love!
Page 22 of 26
Re: Dragonfly - show the love!
Posted: Thu May 27, 2021 6:15 pm
Love that 20CV DF2!
Re: Dragonfly - show the love!
Posted: Sat Jun 12, 2021 11:01 am
Re: Dragonfly - show the love!
Posted: Fri Jun 18, 2021 3:43 pm
Re: Dragonfly - show the love!
Posted: Tue Jun 29, 2021 3:41 am
Poppy harvest.
Re: Dragonfly - show the love!
Posted: Sat Jul 03, 2021 5:14 am
Re: Dragonfly - show the love!
Posted: Fri Jul 09, 2021 3:23 pm
My Dragonfly 2 in K390!
Re: Dragonfly - show the love!
Posted: Wed Jul 14, 2021 2:32 pm
These two have kicked every other knife out of my pocket. The longer clip makes it easier to deploy and re-attach, and I relocated it to the lanyard hole for a better look and a slightly deeper carry.
Re: Dragonfly - show the love!
Posted: Fri Jul 16, 2021 10:57 am
Dragonfly 2
Re: Dragonfly - show the love!
Posted: Wed Jul 21, 2021 11:24 pm
DF Salt with micarta scales. During the scale swap I also installed PB washers.
Re: Dragonfly - show the love!
Posted: Tue Jul 27, 2021 8:32 am
Nice! Looks awesome!
Re: Dragonfly - show the love!
Posted: Sat Aug 21, 2021 5:48 am
Re: Dragonfly - show the love!
Posted: Sat Aug 21, 2021 5:41 pm
Re: Dragonfly - show the love!
Posted: Sat Aug 21, 2021 9:34 pm
I really, really like that clip move mod you did.
How did you make the "new" or extended wire clip grooves? Melt them? File? Dremel?
I want to do this mod to my DF's too.
Thanks in advance,
u.w.
Re: Dragonfly - show the love!
Posted: Sun Aug 22, 2021 9:49 am
Hi u.w.
Melted. I made a jig to hold the original clip in my drill press so I could align the grooves and control the depth. Heated the original clip with a torch until it glowed. Then pressed down. Made sure to turn the clip around so that only the flat area would touch the knife handle! Cleanup with an exacto blade.
Kurt
Melted. I made a jig to hold the original clip in my drill press so I could align the grooves and control the depth. Heated the original clip with a torch until it glowed. Then pressed down. Made sure to turn the clip around so that only the flat area would touch the knife handle! Cleanup with an exacto blade.
Kurt
Re: Dragonfly - show the love!
Posted: Sat Oct 23, 2021 1:26 pm
Re: Dragonfly - show the love!
Posted: Sat Oct 23, 2021 5:51 pm
Are the wedges just to keep the chuck from spinning?kurt_r wrote: ↑Sun Aug 22, 2021 9:49 amHi u.w.
Melted. I made a jig to hold the original clip in my drill press so I could align the grooves and control the depth. Heated the original clip with a torch until it glowed. Then pressed down. Made sure to turn the clip around so that only the flat area would touch the knife handle! Cleanup with an exacto blade.
Kurt
Re: Dragonfly - show the love!
Posted: Sat Oct 23, 2021 8:12 pm
Probably to keep the clip stationary so it can't rotate when he is melting the clip slots. Great Mod kurt_r!Woodpuppy wrote: ↑Sat Oct 23, 2021 5:51 pmAre the wedges just to keep the chuck from spinning?kurt_r wrote: ↑Sun Aug 22, 2021 9:49 amHi u.w.
Melted. I made a jig to hold the original clip in my drill press so I could align the grooves and control the depth. Heated the original clip with a torch until it glowed. Then pressed down. Made sure to turn the clip around so that only the flat area would touch the knife handle! Cleanup with an exacto blade.
Kurt
Re: Dragonfly - show the love!
Posted: Mon Oct 25, 2021 12:44 pm
Re: Dragonfly - show the love!
Posted: Sun Oct 31, 2021 3:45 pm
