Spyderco Forums

Posted: **Sun May 23, 2010 9:46 pm**

Since there have been several Swick picture threads recently, how about a consolidated thread for everyone? I'll start:

Old Sprint Swick with gray G10 scales. I thinned it out a lot since this is a necker. Also widened the lanyard hole for a pin.

Posted: **Sun May 23, 2010 9:48 pm**

This is my other one, a Swick 2 with blue G-10 scales and sheath:

Posted: **Mon May 24, 2010 10:49 am**

Nice work.

Posted: **Sun Nov 17, 2013 4:32 pm**

Made some handles for my Swick3. 1/8" black/grey layered G-10 on .060" red G-10 liners. This is my first attempt at Anso-style texturing and it was far easier than I thought and I'm extremely pleased with how they turned out. I made the scales pretty thin and, as a result, had to grind down the screws a bit on the pivot bolts so that they would fit. This was fun to make and I'm excited to make another set for my other Swick3!

Posted: **Mon Nov 18, 2013 1:06 pm**

Sorry :o I haven’t done any work on them.

Just bare, basic Swicks and a couple of Spots to show the origins of the Swick.

Posted: **Mon Nov 18, 2013 1:33 pm**

jabba359 wrote:Made some handles for my Swick3. 1/8" black/grey layered G-10 on .060" red G-10 liners. This is my first attempt at Anso-style texturing and it was far easier than I thought and I'm extremely pleased with how they turned out. I made the scales pretty thin and, as a result, had to grind down the screws a bit on the pivot bolts so that they would fit. This was fun to make and I'm excited to make another set for my other Swick3!

Nice work, Kyle. I like the contrast with the red liners!

The difference between the Swick 1, 2, and 3 are really significant - I hadn't realized how much they evolved until I looked at Reject's photo. Thanks for posting that!

TedP

Posted: **Mon Nov 18, 2013 5:19 pm**

Great handles gentlemen!!! Nice work!!! John

Posted: **Mon Nov 18, 2013 10:20 pm**

very nice Jabba

Posted: **Tue Nov 19, 2013 3:39 am**

I have a swick black cerakote with coyote scales on the way!

Posted: **Wed Nov 20, 2013 12:38 am**

I need scales...............

Posted: **Mon Dec 02, 2013 4:26 pm**

Posted: **Mon Dec 02, 2013 8:54 pm**

Here's an old Swick-Pic from when I put purpleheart scales on my Swick2. These are "knockdown" scales that are secured with pivot bolts and not epoxied in place.

TedP

Posted: **Mon Dec 02, 2013 10:58 pm**

looks great Ted!

Posted: **Mon Feb 03, 2014 7:33 pm**

Made this set of scales for my Swick giveaway this last month. "Ramon" G-10 on purple G-10 liners.

Posted: **Mon Feb 03, 2014 7:37 pm**

And I made this set for a fellow forum member. Lime green G-10 on black G-10 liners with black screws.

Posted: **Mon Feb 03, 2014 7:46 pm**

Very nice Kyle.

Posted: **Mon Feb 03, 2014 8:04 pm**

Beautiful scales! May have to get a Swick and neck sheath! :rolleyes:

Posted: **Mon Feb 03, 2014 8:48 pm**

Nice work. Those green scales really look great! :D

Posted: **Mon Feb 03, 2014 9:01 pm**

Reject wrote: Just bare, basic Swicks and a couple of Spots to show the origins of the Swick.

Can someone enlighten me to the function of the, raised "button" on the spot? Is it something for sheath retention? Or purely cosmetic?

Nice scales everyone the textured g10 really makes these pop.

Posted: **Sat Feb 08, 2014 2:13 am**

Wooden scales epoxy'd down, with leather lanyard

Spyderco Forums

Show your Swick

Show your Swick