Future Spyderco Knives List

[Blerv]

The deadlines/status can be vague, but if you have any details (concepts, rumors, prototypes, or Sal's own words) please list them and we will label accordingly. If you have hyperlinks please list them and I will tag them below the knife described.

I will check this daily because I have no life, etc. :)


Latest News: proto pics. BIG thanks to Mr Blonde!!!

Manix 2 FRN Lightweight, Jason Breeden Rescue, Ed Schempp Balance, Kiwi Slipit, Matriarch Sprint (Brown), Grasshopper, G10 Native 4, Sprint Damascus Delica, Caly3.5, Lum Chinese CF, Lum Chinese BIG G10, Superleaf, Sage 3, UKPK FRN, UKPK Titanium, UKPK CF, Paramilitary2, Shabaria - Sprint, Fred Perrin Folder PPT, Jens Anso Zulu, Laci Szabo Folder. Dialex Junior. FFG Byrds. Not pictured: Squeak and others.

http://www.spyderco.com/forums/showthread.php?t=42440


**Thread Update: I have stopped updating from Bladeforums. If anyone sees notes please pass them over or I'll likely see them on the Sal's Casual Bombshell Thread. If not, they won't make it on the list ***



Pending Release: Buckle up!



Pilots: Limited run test knives for the general public: none at this time.


Prototypes: Knives that Sal & Team are working on that may or may not ever see reality. These should have been seen in a Spyderco video or at a major show. Category includes knives like the Ladybug Hawkbill that Sal literally said: "We will work on a prototype/design"

Shabaria Sprint:
http://www.spyderco.com/forums/showthread.php?t=42440

Jens Anso Zulu:
http://www.spyderco.com/forums/showthread.php?t=42440

Superleaf:
http://www.spyderco.com/forums/showthread.php?t=42440

Bob Lum Chinese Folder (Large)
http://www.spyderco.com/forums/showthread.php?t=42440

Lil Temperance 2:
http://www.spyderco.com/forums/showthre ... temperance

Spyderco Tomahawk:
http://www.spyderco.com/forums/showthre ... t=tomahawk

Laci Szabo folder:
http://www.spyderco.com/forums/showthread.php?t=42440

Dragonfly 2:
http://www.spyderco.com/forums/showthre ... post522102
http://www.spyderco.com/forums/showthread.php?t=39237

TerroTuff Manix 2:
http://www.spyderco.com/forums/showthread.php?t=39237

"Tuff":
http://www.spyderco.com/forums/showthread.php?t=39280

Manix 2 with Endura-style FRN:
http://www.spyderco.com/forums/showthread.php?t=42440

Native 4 G10: http://www.spyderco.com/forums/showthread.php?t=42440

Paramilitary 2.0:
http://www.spyderco.com/forums/showthread.php?t=42440

Sage 3: Blackie Collin's "Bolt Action" lock
http://www.spyderco.com/forums/showthread.php?t=42440

Sage 4: Al Mar/Harvey McBurnette mid front lock.
http://www.bladeforums.com/forums/showt ... p?t=679656

Native 4: Perhaps with S90V steel as an option or run.
http://www.spyderco.com/forums/showpost ... tcount=568

Ed Schempp Balance:
http://www.spyderco.com/forums/showthread.php?t=42440

Jason Breeden Rescue:
http://www.spyderco.com/forums/showthread.php?t=42440

Perrin Folder/PPT Sacha:
http://www.spyderco.com/forums/showthread.php?t=42440

Bushcraft: Talk of next is S90v, synthetic handle (G10, etc) and FFG. Current original version seconds being sold on website.
http://www.britishblades.com/forums/sho ... stcount=76

Samaritan: Auto knife
http://www.spyderco.com/forums/showpost ... stcount=78

Bifold: Auto knife
http://www.spyderco.com/forums/showpost ... stcount=14

Persian - Sprint: Another link exists but I don't recall where.
http://www.spyderco.com/forums/showpost ... ostcount=9
http://www.spyderco.com/forums/showpost ... tcount=265

Yojimbo 2:
http://www.spyderco.com/forums/showpost ... stcount=79
http://www.spyderco.com/forums/showpost ... ostcount=7

Matriarch Sprint: Brown FRN original construction. PE & SE (800 each) $99.95 MSRP
http://www.spyderco.com/forums/showthread.php?t=42440

Ti and CF UKPK's:
http://www.spyderco.com/forums/showthread.php?t=42440

Squeak: (not pictured)
http://www.spyderco.com/forums/showthread.php?t=42440

Caly3.5:
http://www.spyderco.com/forums/showthread.php?t=42440

Dodo Sprint/Redesign:
http://www.spyderco.com/forums/showpost ... stcount=12

Laci Szabo "Folding Fly" Spyderco Collaboration
http://www.szaboinc.com/edged_detail.as ... =15&ID=116


Concepts & Rumors: We might get lucky. This is a list of knives that people may have seen but there is no image/written word of them existing. Don't cross your fingers but don't be surprised. This could also include Sal saying, "We have considered as an option ___". You can probably find more by searching on these but we won't add hyperlinks without proper word.

BIG Manix 2 (over 4"): Eric concepting, nothing engineered yet.
http://www.bladeforums.com/forums/showt ... 006&page=2

Framelock Dyad: Concept

Fred Perrin Folders: Concept

Ed Schempp Tuff: Concept

Bodacious: Concept

Resilience (larger Tenacious):
http://www.spyderco.com/forums/showthread.php?t=39237

Fred Perrin 5" Blade Micarta (Possibly 200-300 sprint from nagging forumites..."Maybe" from Sal)

Boyscout Folder:
http://www.bladeforums.com/forums/showt ... p?t=659761

Viking: ?

Baby Manix2:
http://spyderco.com/forums/showthread.php?t=39674

D’Allara 2:
http://www.spyderco.com/forums/showthre ... post522194

Military 2:
http://www.spyderco.com/forums/showthre ... post522198


Folding Replaceable Utility Knife: "we've been thinking about the prospect. Sal"
http://www.bladeforums.com/forums/sh...d.php?t=427612

Sprint/Redone "Navigator"
http://www.spyderco.com/forums/showpost ... ostcount=1

Slipit Multi-Tool:
http://www.britishblades.com/forums/sho ... stcount=35

Caly4:
http://www.spyderco.com/forums/showpost ... stcount=51

Native Slipjoint
http://www.spyderco.com/forums/showpost ... tcount=118

Native XL Large - bladeforums info to follow. Maybe 3.5-4" blade

Spyderco Navaja
http://www.spyderco.com/forums/showthre ... ght=navaja

Sharpeners:

Duckfoot Redesignated:
http://www.spyderco.com/forums/showpost ... tcount=154

Bladeforums talk of Kitchen Knives by Sal:
http://www.bladeforums.com/forums/showt ... p?t=722911

Friction Folder:
http://spyderco.com/forums/showpost.php ... stcount=75

"Slightly Smaller Sage...like 2.75 blade on Caly3."
Response:
"Funny you should ask. We've been working on just such a model. The pattern is finished. Now we're trying to decide what kind of lock to use, or make it a non-locker?
sal"

http://www.bladeforums.com/forums/showp ... stcount=18
http://www.spyderco.com/forums/showpost ... ostcount=2

Mule 7 Notes: http://www.spyderco.com/forums/showpost ... ostcount=2

Talk of Toxic Green H1 Catcherman:
SE, Hollow Ground, Toxic Green. Sal contemplating.
http://www.usualsuspect.net/forums/show ... stcount=13

Byrd Ronin:
http://www.spyderco.com/forums/showpost ... stcount=12


Keep em coming!

[FLYBYU44]

You forgot the only one that I will probably buy out of the upcoming knives. The Terzuola slip-it, it's supposed to be out sometime in late summer, I'm waiting very impatiently.

[LorenzoL]

Sage II RIL: released
Moteng Lum Chinese: released
Leafstorm: just released
Mule MT-04 ZDP-189: imminent release

[kbuzbee]

Three I'm waiting on

G-10 Dragonfly ---
S90V FFG Manix2 (Fall?)
CPM-M4 Bradley ---

[Jay_Ev]

Chokwe

[The Deacon]

There's always the "Sal's Casual Bombshell" thread for logging his latest glimpses of things to come. As far as ETA estimates go, given the venting which has occurred here in the past when unreasonable expectations of precision are not met, I think the best we can hope for on that front is acknowledgment that a new model has arrived in Golden and is going through QC.

As for "what's somewhere in the pipeline" you can add the CF Kopa, which probably will arrive in late fall, and yet another Military variant, the Titanium RIL version, to the list.

[Blerv]

I did leave quite a few off the list as it was getting late. Thanks for the adds guys, ill add them (an any extras) on monday to the first post.

Thanks Deacon, great idea.

It would think a running list of "maybe" & "eventually" knives would help some realize how hard the crew is working & how much they have offered to the public (sometimes from nagging). I dont know of any other companies so involved in their own communities.

[RJNC]

This is a very cool idea for a thread.

[Blerv]

Mule zdp189 --- friday july 10!!

[ColonelX1]

dont forget the Szabo "folding-fly" or whatever its called

im definately lookin forward to the Leafstorm and the G10 D'fly, once i get the funds, that Manix 2 is MINE :D

Cheers!

the Colonel

[Doc Pyres]

Although not a knife, there is a Spyderco tomahawk in the design stage.

[ozspyder]

Kopa Squash Bone: released

[Blerv]

I've been digging and updating daily. All the nitpickers feel free to make sure I'm not missing any.

Just looking at the list is giving me a big dumb grin :)

[ozspyder]

CF Kopa is not in proto stage :) It is confirmed. Proto has already been seen and approved by all Kopa lovers :p It will be released in a little while :D

IIRC, Sal has mentioned C83 Large Persian sprint - possibly. No protos seen nor dates mentioned.

[clovisc]

don't forget the hobbit warrior... :D

[The Deacon]

Minor nit - not sure what "R&D" is suppose to signify. Since materials have been ordered for the Bradley folder, I think we can assume it's a done deal and will be manufactured. OTOH, at least as of the end of May, the Szabo folder was still in what Spyderco refers to as the "concept model" stage, which means there is at least some question as to whether it will ever be manufactured. Recall seeing "bootleg" photos from Blade Show of three sizes of a Fred Perrin folder, Ed Schempp's Balance folder, a framelock Dyad, and something called the Bodacious that looked a bit like a mid-lock version of the D'Allara Rescue - all of which were also in the concept model stage at that point.

[Th232]

One more to add to your list, the Tuff, by Ed Schempp. Disclaimer though, I've only ever heard about it though, still in the concept stage, dunno if it's been dropped or not. From what I heard, Ti integral framelock, steel is CPM-3V.

Hope it hasn't been dropped...

One small correction, your list says "Lil Temp", I believe that should have a "2" after it, given that the original Lil' Temp was released and disco'd some time ago.

[Blerv]

Minor nit - not sure what "R&D" is suppose to signify. Since materials have been ordered for the Bradley folder, I think we can assume it's a done deal and will be manufactured. OTOH, at least as of the end of May, the Szabo folder was still in what Spyderco refers to as the "concept model" stage, which means there is at least some question as to whether it will ever be manufactured. Recall seeing "bootleg" photos from Blade Show of three sizes of a Fred Perrin folder, Ed Schempp's Balance folder, a framelock Dyad, and something called the Bodacious that looked a bit like a mid-lock version of the D'Allara Rescue - all of which were also in the concept model stage at that point.

We are nothing without definitions. Thank you Deacon.

I was using "R&D" to indicate unknown status whether it be concepts or something before drumming up a prototype. Perhaps "concept" is a safer word.

I'll rethink categories to keep expectations in line. Thanks for those models.

[araneae]

Sal mentioned a proto of the little sibling to the Tenacious. Persistence I think it was called.

[Blerv]

completely rearranged. Hope that looks better :)

Updated all mentioned above in corresponding areas. If you see a link that gives more info please tag it and I'll change stuff around.

Thanks.