Some new stuff
This should help...enyong112 wrote:Sal, like what Michael Cook asked, what does Limited Production mean?? :)
sal wrote:Hi Michael,
"limited" production means that we can't make as many as we may want. The skills required to make certain models are great, take many years to learn, and the capacity for a factory to make that model is limited to a certain amount per month. Usually about 200 pcs per month.
Models like the Stretch2, Caly3 (especially in CF), E4 & D4 in G-10, Micro Dyad, P'kal, Civilian, etc. are generally limited to about 200 pcs per month.
"Sprint" runs are a re-make of a model that we've made in the past. We can make a short run, (500 - 2,000) with a different handle material or color, or an upgrade in steel, but no new tooling is required.
sal
There is nothing more important than this one day.
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Ouch , that's gonna hurt the wallet. G-10 Delica at $10 higher than the list for a Caly 3. Maybe someone will feel generous for my April birthday.TazKristi wrote:Current ETA for the C10GPFG and the C11GPFG is Jan/Feb. MSRPs are...
C10GPFG - $184.95
C11GPFG - $164.95
Kristi
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
- Simple Man
- Member
- Posts: 2036
- Joined: Fri Sep 24, 2004 12:00 pm
- Location: Kentucky
- Agent Starling
- Member
- Posts: 2334
- Joined: Fri Oct 27, 2006 9:40 pm
- Location: cyberspace
bring it on!
That will be one sweet knife for sure! :DSimple Man wrote:Can't let this one get too far down....I'm ready for my G-10 E4.
Agent Starling
"Too many was too many, but way too many was just right."
The G-10 E4 has been my EDC for the past few days. Gail is carrying the G-10 D4. They're very nice pieces for carry and use. The G-10 is USA made and shipped to Seki.
I must admit that the impetus for this venture was promted by our valued small group of Spyderco forumites.
Those of you that have used full flat VG-10 know the cut. We hope you will enjoy and appreciate the effort that the US & Seki Spyderco team has put into this design.
sal
I must admit that the impetus for this venture was promted by our valued small group of Spyderco forumites.
Those of you that have used full flat VG-10 know the cut. We hope you will enjoy and appreciate the effort that the US & Seki Spyderco team has put into this design.
sal
Hiphip hurrah !
Thank you Sal & Spyderco Golden and Spyderco Seki :D
I am certain this G10 run with its VG10 FFG will be a real winner for :spyder: for 2008 and beyond.
Make mine with a low riding wire clip and slap me happy !
Cheers
Dan
Thank you Sal & Spyderco Golden and Spyderco Seki :D
I am certain this G10 run with its VG10 FFG will be a real winner for :spyder: for 2008 and beyond.
Make mine with a low riding wire clip and slap me happy !
Cheers
Dan
Cheers
Daniel (Certified Persian & Kopa nut)
Facebook profile: https://www.facebook.com/ozspyder
:spyder: I love my: Persians, Kopas, and Lums
:spyder: * Daniel's Spyderco Hoard *
:spyder: * Ozspyder's Kopa Kabana *
Daniel (Certified Persian & Kopa nut)
Facebook profile: https://www.facebook.com/ozspyder
:spyder: I love my: Persians, Kopas, and Lums
:spyder: * Daniel's Spyderco Hoard *
:spyder: * Ozspyder's Kopa Kabana *
We certainly appreciate effort of Spyderco team. I cannot wait for these knives.
The only problem I have, I do not know what to buy: Delica and Endura or two Enduras :confused:
The only problem I have, I do not know what to buy: Delica and Endura or two Enduras :confused:
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
My top choices Natives5, Calys, C83 Persian
My top choices Natives5, Calys, C83 Persian
- Left Hand Path
- Member
- Posts: 638
- Joined: Tue Oct 10, 2006 12:44 pm
- Simple Man
- Member
- Posts: 2036
- Joined: Fri Sep 24, 2004 12:00 pm
- Location: Kentucky
You can just go ahead and slap me happy, no changes... :Ddatan wrote:Hiphip hurrah !
Make mine with a low riding wire clip and slap me happy !
G-10 handle, FFG, 3 1/2"-4" VG-10 blade, solid backstrap, secure lock, adjustable pivot, tip up, what more is there???
Thanks, Sal we do appreciate how much you listen and act on our whims and desires.
Romans 8:31 ....If God is for us, who can be against us? - <><
The Spyderco hole is a rotating mechanical assembly of one part.
".....tractors don't have to look like Ferraris" -Sal
The Spyderco hole is a rotating mechanical assembly of one part.
".....tractors don't have to look like Ferraris" -Sal
- mrappraisit
- Member
- Posts: 1435
- Joined: Fri Nov 16, 2007 11:28 am
- Location: AZ,480
Sal, We totally appreciate the effort you guy's put into these knives. We also know that we are all very lucky to enjoy the product's of a company that actually listens, and cares what we :spyder: knut's think.sal wrote: Those of you that have used full flat VG-10 know the cut. We hope you will enjoy and appreciate the effort that the US & Seki Spyderco team has put into this design.
sal
After enlightenment, the laundry.
The G-10 E4 has been my EDC for the past few days. ???
The G-10 E4 has been my EDC for the past few days. Gail is carrying the G-10 D4. They're very nice pieces for carry and use. The G-10 is USA made and shipped to Seki.
sal[/QUOTE
Sal,
Er...ah... since you have been edc the G-10 E4 for the past few days and Gail is carrying the G-10 D4... would that mean... you know... that there are any more o' these fine knives lying about for sale? I'm just saying that if the two of you are packing the latest and greatest, maybe a few pointy steel brothers and sisters might have come along for the ride.
Always the eternal optimist :)
Bruce
sal[/QUOTE
Sal,
Er...ah... since you have been edc the G-10 E4 for the past few days and Gail is carrying the G-10 D4... would that mean... you know... that there are any more o' these fine knives lying about for sale? I'm just saying that if the two of you are packing the latest and greatest, maybe a few pointy steel brothers and sisters might have come along for the ride.
Always the eternal optimist :)
Bruce
I Begone
D4 & E4 Wave PE, Delica PE, Native PE, Native III PE, Tasman SE, Dragonfly etched, Cricket SS PE, 2 Blue Dodo PE, Black Dodo SE, Centofante 4, Stretch PE, Atlantic Salt PE, Caly Jr. ZDP-189, Mini Persian
D4 & E4 Wave PE, Delica PE, Native PE, Native III PE, Tasman SE, Dragonfly etched, Cricket SS PE, 2 Blue Dodo PE, Black Dodo SE, Centofante 4, Stretch PE, Atlantic Salt PE, Caly Jr. ZDP-189, Mini Persian