Bram Frank's lapu lapu corto
- AllenETreat
- Member
- Posts: 3156
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Constitution State USA
Bram Frank's lapu lapu corto
Not a Gunting, but a close second....
http://translate.google.com/translate?h ... %26hl%3Den
If I recell these were for sale on evilbay sometime ago, if you want
just the lapu lapu corto knifeoutlet.com has'em -
http://knifeoutlet.com/shop/10Expand.as ... Code=CKLLC
I myself would be more interested in the "kit" than just the LLC though.
AET
http://translate.google.com/translate?h ... %26hl%3Den
If I recell these were for sale on evilbay sometime ago, if you want
just the lapu lapu corto knifeoutlet.com has'em -
http://knifeoutlet.com/shop/10Expand.as ... Code=CKLLC
I myself would be more interested in the "kit" than just the LLC though.
AET
All men dream, but not equally. Those who dream by night, in the dusty recesses of their minds, awake in the day to find that it was vanity. But the dreamers of the day are dangerous men, for they may act their dreams with open eyes to make it reality.
T.E. Lawrence
T.E. Lawrence
I had a chance to handle them at a knife show and I thought they felt very cheap compared to the Spydie version. Maybe it's because they are made in China, I don't know, but IMO the quality was nowhere near that of the original Spyderco Gunting!AllenETreat wrote:Not a Gunting, but a close second....
Just my .02
- dialex
- Member
- Posts: 9169
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Campina, Romania, Europe, Terra
- Contact:
Huh? Made in China? I was living under the impression they are made in Germany :confused:
I have to check my LLC's, again, but mine aren't looking cheap at all. I have the black and olive G-10 versions (together with the red drones). I dare to say those are good knives, although they are not Spydies.
I have to check my LLC's, again, but mine aren't looking cheap at all. I have the black and olive G-10 versions (together with the red drones). I dare to say those are good knives, although they are not Spydies.
The mind commands the body and it obeys. The mind orders itself and meets resistance.
- AllenETreat
- Member
- Posts: 3156
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Constitution State USA
Note to DiAlex -fellyjr wrote:I had a chance to handle them at a knife show and I thought they felt very cheap compared to the Spydie version. Maybe it's because they are made in China, I don't know, but IMO the quality was nowhere near that of the original Spyderco Gunting!
Just my .02
"Outsourcing" of labor has become the new trend of the 21st century.
Not all businesses engage in it. Personally I can't see sending COMCHI
all the work & putting workers elsewhere out of work.
Hence they wouldn't be able to buy the very products that took
away their jobs!
Some knife companies ( Spyderco & Benchmade come immediately to mind )
offer "made in China" as an option ( ex. Byrd & "red class" knives ) while
some plain old market their product to an unsuspecting buyer!
The Doc Marten's I'm wearing used to be made in England ; look in
the tongue of the shoe : made in China :eek:
AET
All men dream, but not equally. Those who dream by night, in the dusty recesses of their minds, awake in the day to find that it was vanity. But the dreamers of the day are dangerous men, for they may act their dreams with open eyes to make it reality.
T.E. Lawrence
T.E. Lawrence
Thanks for the link, at least we'll get a chance to get our hands on a semi-gunting... :) The gunting's prices now are sky-high...AllenETreat wrote:Not a Gunting, but a close second....
If I recell these were for sale on evilbay sometime ago, if you want
just the lapu lapu corto knifeoutlet.com has'em -
http://knifeoutlet.com/shop/10Expand.as ... Code=CKLLC
I myself would be more interested in the "kit" than just the LLC though.
AET
Cool as Ice... Clear like Water...
Avatar Courtesy of Tianix
Avatar Courtesy of Tianix
Cherusker Knives is a german company, but the knives are made in china, all knives they have in their line up are made in china. But it doesn´t mean that it is cheap stuff.dialex wrote:Huh? Made in China? I was living under the impression they are made in Germany :confused:
I have to check my LLC's, again, but mine aren't looking cheap at all. I have the black and olive G-10 versions (together with the red drones). I dare to say those are good knives, although they are not Spydies.
Regards from germany
Robert
The LLC is an extremly well designed folder! It´s a wonderful combination of SD and Utility, fantastic ergos, very secure grip, grip fast changeable and highly usable. Yes, it is made in China and because of the construction an the used rather thin liners which keeps weight down one can squeeze the handle slabs together. This doesn´t reduce the security or usability at all, though.
Everything is well fitted and finished. The folder comes for the lowest price of a Delica 4 in Germany, which is a really good deal. I don´t want to comment on the Puzzle Lock, shiny footprints, you know. I have bought a LLC Military about a half year ago because I simply couldn´d withstand the design and the special model. It wasn´t meant for me, but due to circumstances it stayed with me and I´m not sad about it.
Some quickshots from today:
-
-
-
-
JB
Everything is well fitted and finished. The folder comes for the lowest price of a Delica 4 in Germany, which is a really good deal. I don´t want to comment on the Puzzle Lock, shiny footprints, you know. I have bought a LLC Military about a half year ago because I simply couldn´d withstand the design and the special model. It wasn´t meant for me, but due to circumstances it stayed with me and I´m not sad about it.
Some quickshots from today:
-
-
-
-
JB
We need locking :spyder: folders, at least a D4, with very small :spyder:holes (no one-hand function, only trademark) for legal carry in Germany!
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
- Firefighter880
- Member
- Posts: 453
- Joined: Sun Oct 29, 2006 12:22 am
- Location: USA
I almost bought one of those LLC's.
Ended up goin for the Gunting, though.
:spyder:
Ended up goin for the Gunting, though.
:spyder:
- Attachments
-
- SSCN1611.JPG (68.47 KiB) Viewed 23870 times
[CENTER][SIGPIC][/SIGPIC][/CENTER]
[CENTER]"Courage is not the absence of fear, but rather the judgement that something else is more important than fear." [/CENTER]
Current Spyders: Civilian, Matriarch, Endura 3 CE, Endura 4 CE, Endura 4 SE, SS Endura 4 SE, Lava, Manix CE
Spyders of the Past: ATR, BlackHawk, Bob Lum Tanto, Chinook 3, Dodo, Gunting, Karambit, Lil Temp, Manix PE, Para Mili, Ronin, Yojimbo, Mili, Native
[CENTER]"Courage is not the absence of fear, but rather the judgement that something else is more important than fear." [/CENTER]
Current Spyders: Civilian, Matriarch, Endura 3 CE, Endura 4 CE, Endura 4 SE, SS Endura 4 SE, Lava, Manix CE
Spyders of the Past: ATR, BlackHawk, Bob Lum Tanto, Chinook 3, Dodo, Gunting, Karambit, Lil Temp, Manix PE, Para Mili, Ronin, Yojimbo, Mili, Native
- Puyallupknifegu
- Member
- Posts: 889
- Joined: Mon May 15, 2006 1:20 am
- Location: Puyallup, WA
- Contact:
Thanks Dete, I´m really a bad photographer, just a bit lucky with the reflections there.
Indeed the Golden made Gunting feels more valuable, pretty stiff, no sqeezing reaction, thicker liners and handle scales, better blade steel. The lock should be stronger too. If you ever have the chance, get the Gunting first because they already have become rather expensive.
On the other hand the LLC comes in Germany for about a third of the current Gunting prices and is a good choice for those who can´t or wouldn´t like to spend about 200 Euro or so for a Gunting.
Again some quickshots from today:
-
-
-
-
-
JB
Indeed the Golden made Gunting feels more valuable, pretty stiff, no sqeezing reaction, thicker liners and handle scales, better blade steel. The lock should be stronger too. If you ever have the chance, get the Gunting first because they already have become rather expensive.
On the other hand the LLC comes in Germany for about a third of the current Gunting prices and is a good choice for those who can´t or wouldn´t like to spend about 200 Euro or so for a Gunting.
Again some quickshots from today:
-
-
-
-
-
JB
We need locking :spyder: folders, at least a D4, with very small :spyder:holes (no one-hand function, only trademark) for legal carry in Germany!
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
It appears to use a compression lock, is that correct, and, if so, do they have Spyderco's ok to do so?
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
The Deacon wrote:It appears to use a compression lock, is that correct, and, if so, do they have Spyderco's ok to do so?
Info about the Puzzle Lock, at least you can see and read the drawings: (sorry, my hyperlink button doesn´t work):BOK wrote:Bram actually has a patent on this particular lock design. Its called the puzzle lock. Visually it looks the same as a compression lock but from what I understand is a little different functionally.
Perhaps someone more capable can expand on the differences.
http://www.cherusker-messer.de/shop/pag ... hop_param=
JB
We need locking :spyder: folders, at least a D4, with very small :spyder:holes (no one-hand function, only trademark) for legal carry in Germany!
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
If I could only keep one of all my knives, it probably would be a D4.
Ever tried, ever failed, no matter.
Try again, fail again, fail better.
(Samuel Beckett)
- Agent Starling
- Member
- Posts: 2334
- Joined: Fri Oct 27, 2006 9:40 pm
- Location: cyberspace
+1
Me too...might get an LLC some day though... :DFirefighter880 wrote:I almost bought one of those LLC's.
Ended up goin for the Gunting, though.
:spyder:
Agent Starling
"Too many was too many, but way too many was just right."
- Michael Cook
- Member
- Posts: 4383
- Joined: Fri Apr 01, 2005 10:44 pm
- Location: People's republic of Madison
- Contact:
:spyder: So how often do guntings show up on ebay and how much should a guy have set aside to reliably pick one up if steel/edge configuration didn't
matter? :spyder:
matter? :spyder:
More of what does not work will not work. Robin Cooper, Rokudan; Aikikai.
There is great power in the profound observation of the obvious. John Stone, Rokudan; Aikikai
There is great power in the profound observation of the obvious. John Stone, Rokudan; Aikikai