Spyderco Forums

Here's what I want. The most beautiful knife Spyderco ever made is the One Eyed Jack. What I would like, really want, is a back lock Lil Native made like that. I'd like file work on the back spring and etc., and ivory/off white polished G10 with a Spyder inlaid on both sides. If a Spyder is too difficult, then perhaps a diamond.

JSumm wrote: ↑

Thu Oct 13, 2022 5:44 pm

Netherend wrote: ↑

Thu Oct 13, 2022 5:09 pm

Linerless G10 Magnacut LockBack Manix 2 OR a Linerless Magnacut Native 5(and a half lol) that is 3.25-3.6 inches in blade length.

Basically a leaf shaped Magnacut blade between 3-4 inches with a lockback with linerless G10 scales. Call it the Mystic or something to carry the Native, Chief, Sage and Shaman theme.

What if it was a choil-less Native Chief? Smaller overall footprint. Magnacut needs a scale color too. That would be sweet.

I would definitely be interested in it.

Fluted Ti Native Chief

Mid size 3.5" Native in Rex45 G10

SE Military

CBBL Shaman

T A T A N K A

My dream spyderco has remained the same for the past year or two…

K390 Shaman in denim micarta. Honestly, I would probably pay $500 for that knife if need be…

EDIT: or a crucarta Sage 5 lightweight…I don’t think that requires any explanation for most people

A Chaparral with stonewashed titanium scales, keep the XHP steel.
A Chaparral Sun and Moon, with better (imo) colors, like blue sky g-10 and gold/brass Sun inlay, keep the black and mother of pearl.

gad226 wrote: ↑

Mon Oct 31, 2022 8:34 pm

A Chaparral with stonewashed titanium scales, keep the XHP steel.
A Chaparral Sun and Moon, with better (imo) colors, like blue sky g-10 and gold/brass Sun inlay, keep the black and mother of pearl.

Yeah the sun side does not do the moon side justice on the chaparral feels a bit like they cut a corner on that for me.

Make exactly this knife into a LW Manix 2. Same Green FRN, same serrated LC200N, screw together construction, heck even a back lock but I know that’s pushing it….

kobold wrote: ↑

Fri Oct 14, 2022 12:29 pm

Fluted Ti Native Chief
...

I'd like it myself.

I'd also like a Spyderco Native Chief that was heavy duty with liners like a Hinderer XM or Emerson CQC series knives.

pe swick 5

vivi wrote: ↑

Tue Nov 01, 2022 5:11 pm

pe swick 5

If I am going full grail status model it would be

MODEL - Left handed C36 Military


BLADE - Stonewashed CPM 3V run around 61hrc with a DeltaV heat treat, ground a smidge thinner behind the edge to take advantage of the toughness of the steel. The spine would be crowned like that of a sebenza

HANDLE - Ti frame lock with a carbon fiber show scale or a full carbon fiber/liner lock like the 52100 sprint.

HARDWARE - blacked out screws, pivot and stop pin. It would look slick with anodized blue standoffs and lanyard tube.

CLIP - stonewashed black dlc clip


Ide buy 5 and sell every other pocket knife I own… except my millies

XL Shaman Micarta. Flexible on steel and micarta color. Make her beefy and heavy.

zuludelta wrote: ↑

Wed Oct 05, 2022 7:20 pm

I'm really happy with my current favourite Spydercos, but that hasn't stopped me from dreaming up some material/design combinations that I really, really want to see (though they are also quite unlikely):

• Schempp Rock in Cru-Wear or 3V
• Schempp Rock Salt in LC200N or MagnaCut
• Yojimbo 2 Salt in LC200N (olive drab or forest green G10 handle scales) or MagnaCut (flat dark earth or coyote G10 scales), with satin finish & DLC options
• Ronin 2 in AEB-L or 14C28N
• Reverse in AEB-L or 14C28N (honestly, I just want the Reverse back in production, so a minor upgrade to BD1N from the original BD1 or even a downgrade to 8Cr13MoV would be more than fine)
• RockJumper in K390
• Tasman Salt 2 in LC200N
• A regular production Shaman in CruWear or 3V
• Lil' Temperance 3 Lightweight in SPY27
• Temperance 2 in CruWear or 3V
• Jumpmaster 2 in LC200N or MagnaCut
• Serrata in Cast 440C, but with a grind more like Stuart Ackerman's custom Serratas

One that jumped out at me on this list is the TEMPERANCE 2 model with CRUWEAR or 3V. You have decent stuff on that long list but that TEMP 2 with a supersteel blade just screams at me. I've loved the TEMP 1 and TEMP 2 both since their introductions. I would also love a Salt Series version of the TEMP 1 in both PE & SE. I was always disappointed that they never offered the TEMP 2 in full SE like they did with the TEMP 1.

benben wrote: ↑

Tue Nov 01, 2022 11:20 am

Make exactly this knife into a LW Manix 2. Same Green FRN, same serrated LC200N, screw together construction, heck even a back lock but I know that’s pushing it….
0AA314EC-74E8-4660-AE35-265175697C71.jpegE52CECE8-44E6-4D25-B545-470026EE505E.jpeg

Nice one ! This would get my attention too ! MG2

That's pretty simple for me:

...a "SALT" SS Stretch 2 -- PE Magnacut bade & LC200 liners. I'd probably buy 3-5 of them just to have/give away to kids.

zuludelta wrote: ↑

Wed Oct 05, 2022 7:20 pm

[*]Serrata in Cast 440C, but with a grind more like Stuart Ackerman's custom Serratas
[/list]

If I didn't already own a custom Serratta from Stuart I would get a Spyderco Serratta reground. I own both. The Spyderco is fine as is, and has to be most of the most under rated Spyderco knives. People see 440C and get turned off. It's not 440C. It's cast 440C and there is a big difference. People just didn't get this knife and I applaud Spyderco for taking the risk to make it. I used mine all the time. It's surprisingly durable.

Slysz Bowie back as a regular production model with a street price of $400.

zuludelta wrote: ↑

Wed Oct 05, 2022 7:20 pm

• Schempp Rock in Cru-Wear or 3V
• Schempp Rock Salt in LC200N or MagnaCut
• Jumpmaster 2 in LC200N or MagnaCut

Any Schempp Rock in any cool steel that can take a beating would me a yes from me and my wallet. A Jumpmaster 2 in LC200N or MagnaCut and give it a non-reflective coating please and I would be buying two, one for me and one for my Nephew in the Marines.

A Shaman in DLT’s Purple G-10 DLC Cruwear exclusive combo. Hoping that eventually happens.