Page 35 of 41
Posted: Wed Jun 12, 2013 6:32 am
by JNewell
donutsrule wrote:Is there an open waiting list/preorder for any upcoming non-S30V PM2?
I don't believe there are any Para2 sprints or exclusives in the works, and I'd guess (just a guess) that until Golden gets caught up on regular production knives, we won't see Spyderco accepting any new exclusive orders or bringing any sprints forward.
Posted: Wed Jun 12, 2013 6:59 am
by chuck_roxas45
What about the coming M4 para?
Posted: Wed Jun 12, 2013 7:04 am
by senorsquare
JNewell wrote:I don't believe there are any Para2 sprints or exclusives in the works, and I'd guess (just a guess) that until Golden gets caught up on regular production knives, we won't see Spyderco accepting any new exclusive orders or bringing any sprints forward.
I believe Jeff from CS said something to this effect on their FB page.
chuck_roxas45 wrote:What about the coming M4 para?
Many hope and dream about this combo, but I'm not expecting to see one anytime soon. I would love to be pleasantly surprised though :D
Posted: Wed Jun 12, 2013 7:07 am
by bh49
kbuzbee wrote:They knew it was you, Roman, and that you'd stress over it.
Ken
Ken,
I always knew that I can count on you :)
R
Posted: Wed Jun 12, 2013 7:09 am
by nirvanero
chuck_roxas45 wrote:What about the coming M4 para?
I love the lighting strike CF handles and the satin aluminum cerakote coating... just my imagination. Wait, you haven't received your 204P and already thinking about the next one? :rolleyes:
Posted: Wed Jun 12, 2013 7:11 am
by chuck_roxas45
senorsquare wrote:
Many hope and dream about this combo, but I'm not expecting to see one anytime soon. I would love to be pleasantly surprised though :D
I just had to try. :)
Posted: Wed Jun 12, 2013 8:20 am
by DougC-3
JNewell wrote:This is good advice and probably the right advice. In a nutshell, loosen both sides of the stop pin, remove the clip, adjust the pivot from both sides to get the right blade tension without lateral play, then tweak the stop pin screws to get the action right. You will probably need BLUE Loctite on at least the stop pin screws and it's not a bad idea on the pivot pin screws. Clean the threads first, never use anything stronger than blue. Use a tool that fits perfectly with a properly hardened bit or you will foul up the screws and/or the tool. :spyder:
Hope this works for ZL1. Thanks, John, I for one am gonna print this out and paste it on a note card or something. :cool:
By the way, what's your favorite lube?
Posted: Wed Jun 12, 2013 8:37 am
by JNewell
chuck_roxas45 wrote:What about the coming M4 para?
Has there been anything concrete (metaphorically speaking) on that? I don't remember anything specific, other than a lot of interest from the masses. :)
Posted: Wed Jun 12, 2013 9:05 am
by JNewell
DougC-3 wrote:Hope this works for ZL1. Thanks, John, I for one am gonna print this out and paste it on a note card or something. :cool:
By the way, what's your favorite lube?
Lube - what I really think? I really think it doesn't matter...these are not NASCAR engines turning 10kRPM. :) I use a CLP (Break-Free, Tri-Flow, whatever) on most knives and CRK grease on my CRKs and most other RILs and Walker linerlocks. YMMV...
Posted: Wed Jun 12, 2013 10:15 am
by DougC-3
JNewell wrote:Lube - what I really think? I really think it doesn't matter...these are not NASCAR engines turning 10kRPM. :) I use a CLP (Break-Free, Tri-Flow, whatever) on most knives and CRK grease on my CRKs and most other RILs and Walker linerlocks. YMMV...
Interesting... thanks again... I'll have these TLAs translated in a minute...
Posted: Wed Jun 12, 2013 11:35 am
by Slash
Finally, now at least people will stop whining about the wait.
Hopefully nobody has any problems with lock up, jimping, etc...
Posted: Wed Jun 12, 2013 4:50 pm
by Zencowboy
I have mine now and in my pocket right now. Perfect lock up and everything!! Thanks! Now the forum knife soon;-)
Posted: Wed Jun 12, 2013 5:26 pm
by Donut
JNewell wrote:Has there been anything concrete (metaphorically speaking) on that? I don't remember anything specific, other than a lot of interest from the masses. :)
The only thing concrete is my desire to get one. :)
Posted: Wed Jun 12, 2013 5:33 pm
by chuck_roxas45
Donut wrote:The only thing concrete is my desire to get one. :)
Yup. :)
Posted: Wed Jun 12, 2013 7:28 pm
by senorsquare
Donut wrote:The only thing concrete is my desire to get one. :)
Yessiree.
And there is still the Cruwear Millie on the horizon. Waiting....
Posted: Wed Jun 12, 2013 7:43 pm
by JNewell
It does seem inescapably appropriate. :spyder: :D
Posted: Wed Jun 12, 2013 9:11 pm
by DougC-3
I guess the next question at hand is how KW will handle the backup list, assuming there are people who didn't claim their green para2's or turn them over to somebody else. I presume all 800 orders will have to be actually mailed or deposit payers contacted before they can deal with the list. Sounds like another long wait for those on the list.
Posted: Wed Jun 12, 2013 9:23 pm
by arjay18
DougC-3 wrote:I guess the next question at hand is how KW will handle the backup list, assuming there are people who didn't claim their green para2's or turn them over to somebody else. I presume all 800 orders will have to be actually mailed or deposit payers contacted before they can deal with the list. Sounds like another long wait for those on the list.
It's shorter than you think, way way shorter. :D
Posted: Wed Jun 12, 2013 9:32 pm
by DeathBySnooSnoo
I so wish that I ordered 2!! I'm not a big fan of the Para2...but I like this one the best so far.
Posted: Wed Jun 12, 2013 9:45 pm
by senorsquare
DeathBySnooSnoo wrote:I so wish that I ordered 2!! I'm not a big fan of the Para2...but I like this one the best so far.
Is it too early to ask when they're gonna do another run of the green ones? :D