Spyderco Forums

Interesting thing about this Reveal: Heavy focus on the wider "Endura" (and "Native") family. And a lot of backlocks.
Not that I´d complain about that.. :rolleyes:

Not a single "Military familiy member", especially no PM2 or Para 3 variant. Which is rare.

PS: Does the Rock Jumper belong to the Endura family ?! :rolleyes:

Hope this question is ok in this thread. I am newer to knife collecting and want to make sure I understand the Mule Team concept as I am interested in this upcoming release.

• This knife is only sold through Spyderco.com and the factory store?
• If so, is there a way to know when the knife is available?

Thanks in advance for the answer.

Wartstein wrote: ↑

Tue May 05, 2020 3:24 pm

Not a single "Military familiy member", especially no PM2 or Para 3 variant.

There’s a Military 2 with comp lock coming down the pipeline as stated in Sals bombshells.

Personally I think this reveal is refreshing without so much focus on PM2 and Para 3

Z-wear Shaman and SpyOpera for me, if I get some. :rolleyes:

That Pochi looks bizarre... But I like that :spyder: is bold enough to release such a design! Good job!!

Chinook3 wrote: ↑

Tue May 05, 2020 3:58 pm

Wartstein wrote: ↑

Tue May 05, 2020 3:24 pm

Not a single "Military familiy member", especially no PM2 or Para 3 variant.

There’s a Military 2 with comp lock coming down the pipeline as stated in Sals bombshells.

Personally I think this reveal is refreshing without so much focus on PM2 and Para 3

I also think it's refreshing. I have nothing against all the especially Para 3 variants, but if things get a bit "rounded up" and production capacities and focus go to a broad variety of models, that's nice.

/ Yes, I know about the Milllie 2... won't discuss it here (once more) though...

I can't help but like the Pochi...

What's up with the tail? Purely aesthetic, or does it have a function?

Cannot wait for the RockJumper, in both SE and PE! And a K390 Endura! Man, this was a great reveal

Pochi is adorable, but $270 MSRP is a tad steep for a pure novelty
I can't find any info on the designer

Sumdumguy wrote: ↑

Tue May 05, 2020 4:10 pm

I can't help but like the Pochi...

What's up with the tail? Purely aesthetic, or does it have a function?

I think it's also the pocket clip!

grubetown wrote: ↑

Tue May 05, 2020 3:47 pm

Hope this question is ok in this thread. I am newer to knife collecting and want to make sure I understand the Mule Team concept as I am interested in this upcoming release.

• This knife is only sold through Spyderco.com and the factory store?
• If so, is there a way to know when the knife is available?

Thanks in advance for the answer.

Yes, the mule team knives are only sold directly through spyderco. If you have the spyderco app, you can sign up to be notified when things are in stock, but I'm not sure if that's the case with the mule teams. Your best bet is probably to watch this forum and the members here will post when they see it available.

Spydergirl88 wrote: ↑

Tue May 05, 2020 10:58 am

Swayback!

Very surprised no matte Slysz wire clip

Super stoked about the K390 everything!

Swayback is a must have (Rat next please :)

Spyopera looks cool. Hopefully PB washers rather than nylon?

abbazaba wrote: ↑

Tue May 05, 2020 5:00 pm

Spydergirl88 wrote: ↑

Tue May 05, 2020 10:58 am

Swayback!

Very surprised no matte Slysz wire clip

I was a little surprised about that too. Not that there's anything wrong with the stamped clip, but I could have sworn the prototype featured a wire clip.

SpyderNut wrote: ↑

Tue May 05, 2020 5:10 pm

abbazaba wrote: ↑

Tue May 05, 2020 5:00 pm

Spydergirl88 wrote: ↑

Tue May 05, 2020 10:58 am

Swayback!

Very surprised no matte Slysz wire clip

I was a little surprised about that too. Not that there's anything wrong with the stamped clip, but I could have sworn the prototype featured a wire clip.

I could've sworn it did too

Spydergirl88 wrote: ↑

Tue May 05, 2020 5:13 pm

SpyderNut wrote: ↑

Tue May 05, 2020 5:10 pm

abbazaba wrote: ↑

Tue May 05, 2020 5:00 pm

Spydergirl88 wrote: ↑

Tue May 05, 2020 10:58 am

Swayback!

Very surprised no matte Slysz wire clip

I was a little surprised about that too. Not that there's anything wrong with the stamped clip, but I could have sworn the prototype featured a wire clip.

I could've sworn it did too

Just did a quick search because I had to know, lol. Here's a link to Marcin's prototype--the one I believe I held at the Blade Show two years ago. It features a custom (non-wire) clip. Not being critical here, but I really wish the production version matched this one: https://www.bladeforums.com/threads/mar ... e.1181692/

SpyOpera - is this the first production folder with micarta in decades? Very excited by the return to micarta!

And forgot my wish list - going with the S's
Swick
Swayback
SpyOpera

and k390 Dfly too...

JuPaul wrote: ↑

Tue May 05, 2020 4:36 pm

Sumdumguy wrote: ↑

Tue May 05, 2020 4:10 pm

I can't help but like the Pochi...

What's up with the tail? Purely aesthetic, or does it have a function?

I think it's also the pocket clip!

Nope, the clip is a seperate piece.

Sumdumguy wrote: ↑

Tue May 05, 2020 4:10 pm

I can't help but like the Pochi...

What's up with the tail? Purely aesthetic, or does it have a function?

It's like a little, blunt marlinspike.

Sumdumguy wrote: ↑

Tue May 05, 2020 5:43 pm

JuPaul wrote: ↑

Tue May 05, 2020 4:36 pm

Sumdumguy wrote: ↑

Tue May 05, 2020 4:10 pm

I can't help but like the Pochi...

What's up with the tail? Purely aesthetic, or does it have a function?

I think it's also the pocket clip!

Nope, the clip is a seperate piece.

You're right - I definitely misread the description. I guess it's just an extra piece then. :o