Spyderco Forums

Hopweaver wrote: ↑

Fri May 31, 2024 12:27 pm

Some cool new variants for sure. Definitely going to scoop up the R.I.L. Tenacious. However I was really hoping for a completely new model or two, not just variants of previous designs.

The Techno 3 is a new model, so there’s one.

mokele wrote: ↑

Fri May 31, 2024 1:35 pm

Where would one pre-order any of them?

Here https://www.knifecenter.com/listing/spy ... 1&kcno=123 for example...

Woah how I miss the SE Temperance in CruWear.

No 15V and no price list.

KnifeCenter has them listed with both MSRP & MAP (25% off MSRP) pricing.

https://www.knifecenter.com/listing/spyderco-reveal-15

I am stunned ! MG2

That new Techno3 looks great! Looks like flipper only opening. Nicely chamfered titanium frame lock with steel lockbar insert and machined titanium clip. MAP is $300.

RamZar wrote: ↑

Fri May 31, 2024 2:06 pm

No 15V and no price list.

KnifeCenter has them listed with both MSRP & MAP (25% off MSRP) pricing.

https://www.knifecenter.com/listing/spyderco-reveal-15

The price list can be viewed/downloaded here: https://www.spyderco.com/catalog/ and each product with pricing can be found here: https://www.spyderco.com/catalog/catego ... uct-reveal.

Kristi

I just pre-ordered a Techno 3. $OUCH$

TazKristi wrote: ↑

Fri May 31, 2024 2:21 pm

RamZar wrote: ↑

Fri May 31, 2024 2:06 pm

No 15V and no price list.

KnifeCenter has them listed with both MSRP & MAP (25% off MSRP) pricing.

https://www.knifecenter.com/listing/spyderco-reveal-15

The price list can be viewed/downloaded here: https://www.spyderco.com/catalog/ and each product with pricing can be found here: https://www.spyderco.com/catalog/catego ... uct-reveal.

Kristi

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

Interesting that the Techno 3 is being made in Italy as opposed to Taichung

Unbrokenchain33 wrote: ↑

Fri May 31, 2024 3:24 pm

Interesting that the Techno 3 is being made in Italy as opposed to Taichung

Looks to me like its a Lionsteel.

The machined clip on the Techno 3 looks awesome! The attachment point is interesting though. Doesn’t look like a traditional screw mount.

It almost looks like access to the clip screw is hidden by a plug or attaches through the inside of the scale somehow. Maybe the frame screw on the opposite side doubles as a clip screw? Looks clever, either way!

I'm excited about the Temperance. Years ago, I asked for the original Temperance and Street Bowie to be brought back in a modern hi-alloy steel. A couple of years ago, I asked again, and Sal indicated something was on the way. Hopefully we'll see the Street Bowie in CruWear too!

RamZar wrote: ↑

Fri May 31, 2024 2:28 pm

TazKristi wrote: ↑

Fri May 31, 2024 2:21 pm

RamZar wrote: ↑

Fri May 31, 2024 2:06 pm

No 15V and no price list.

KnifeCenter has them listed with both MSRP & MAP (25% off MSRP) pricing.

https://www.knifecenter.com/listing/spyderco-reveal-15

The price list can be viewed/downloaded here: https://www.spyderco.com/catalog/ and each product with pricing can be found here: https://www.spyderco.com/catalog/catego ... uct-reveal.

Kristi

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

I seem to recall Spyderco recently announcing that they stopped printing the Reveal catalogs. Was Reveal 14 ever printed?

Brummie wrote: ↑

Fri May 31, 2024 3:31 pm

Hopefully we'll see the Street Bowie in CruWear too!

I don't quite connect with the Temperance at this point. I probably won't until they're all gone - that's usually how it goes with me :)

But a Cru-Wear Street Bowie, and make that a Street Beat too while we're at it. That I'm ready for.

Mushroom wrote: ↑

Fri May 31, 2024 3:34 pm

RamZar wrote: ↑

Fri May 31, 2024 2:28 pm

TazKristi wrote: ↑

Fri May 31, 2024 2:21 pm

RamZar wrote: ↑

Fri May 31, 2024 2:06 pm

No 15V and no price list.

KnifeCenter has them listed with both MSRP & MAP (25% off MSRP) pricing.

https://www.knifecenter.com/listing/spyderco-reveal-15

The price list can be viewed/downloaded here: https://www.spyderco.com/catalog/ and each product with pricing can be found here: https://www.spyderco.com/catalog/catego ... uct-reveal.

Kristi

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

I seem to recall Spyderco recently announcing that they stopped printing the Reveal catalogs. Was Reveal 14 ever printed?

Yes, Reveal 14 was printed

AlexRus wrote: ↑

Fri May 31, 2024 3:49 pm

Mushroom wrote: ↑

Fri May 31, 2024 3:34 pm

RamZar wrote: ↑

Fri May 31, 2024 2:28 pm

TazKristi wrote: ↑

Fri May 31, 2024 2:21 pm

The price list can be viewed/downloaded here: https://www.spyderco.com/catalog/ and each product with pricing can be found here: https://www.spyderco.com/catalog/catego ... uct-reveal.

Kristi

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

I seem to recall Spyderco recently announcing that they stopped printing the Reveal catalogs. Was Reveal 14 ever printed?

Yes, Reveal 14 was printed

Thanks Alex! I’ll have to check if I have a hard copy or not yet because I can’t quite remember receiving it.

Mushroom wrote: ↑

Fri May 31, 2024 3:55 pm

AlexRus wrote: ↑

Fri May 31, 2024 3:49 pm

Mushroom wrote: ↑

Fri May 31, 2024 3:34 pm

RamZar wrote: ↑

Fri May 31, 2024 2:28 pm

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

I seem to recall Spyderco recently announcing that they stopped printing the Reveal catalogs. Was Reveal 14 ever printed?

Yes, Reveal 14 was printed

Thanks Alex! I’ll have to check if I have a hard copy or not yet because I can’t quite remember receiving it.

Or was it the 13th one? I'm running through my paper Reveals right now and already found all of them from the 1st to the 13th
Can't find the 14th one yet. I thought I had it. Now I'm not that sure. Still looking through my stuff

Mushroom wrote: ↑

Fri May 31, 2024 3:55 pm

AlexRus wrote: ↑

Fri May 31, 2024 3:49 pm

Mushroom wrote: ↑

Fri May 31, 2024 3:34 pm

RamZar wrote: ↑

Fri May 31, 2024 2:28 pm

Thank you for the price list in PDF.

Will the printed Reveal 15 be automatically mailed to those who requested and received the printed 2024 Product Guide? If so, will it also include the price list? Thanks again.

I seem to recall Spyderco recently announcing that they stopped printing the Reveal catalogs. Was Reveal 14 ever printed?

Yes, Reveal 14 was printed

Thanks Alex! I’ll have to check if I have a hard copy or not yet because I can’t quite remember receiving it.

Hi Nick!
Sorry, my bad! Reveal 14 was all-digital only, I confused it with the 13th one

The last printed one was Reveal 13

A new reveal? Cool. I'll be over here patiently waiting for the spy27 chief lightweight from reveal 13.