Page 3 of 9
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 10:46 am
by Dazen
I would love to see a high end Salt knife.
Like a Futed Timascus Shaman with a polished/tumble Magnacut blade and a ZircTi backspacer and clip.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 12:35 pm
by cjk
Larry_Mott wrote: ↑Wed Mar 06, 2024 12:54 am
cjk wrote: ↑Tue Mar 05, 2024 9:45 pm
Five-0 is slang for police, so how about a Police 4 model for the Spyderco 50th anniversary knife?
I like the way you think! Except i'd want a SS/Ti Police :)
Native and Delica has been done already, so..
EDIT: To my knowledge the Endura hasn't been done in a Anniversary model, and it is legendary, so a candidate in my book.
thanks! the Ti Endura is a really nice piece.
There have been a number of nicer Enduras.
It's about time the Endela got one too.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 4:43 pm
by apollo
What model it will be doesn’t really matters it just needs to be Sal’s personal choice.
What i do hope it will be is that i hope it to be more affordable then the 500€ Native last time.
It doesn’t need to be extremely fancy but it should not be a frn knife either.
And for me it needs to be PE i have no use nor do i have any urge to have serrations.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 4:56 pm
by cabfrank
I agree with all of that, except the PE part. SE is a big part of Spyderco history.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 5:11 pm
by weeping minora
I think the 50th anniversary should commemorate a special edition SharpMaker; being as Spyderco, "First made things sharp, before making sharp things".
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 8:32 pm
by RadioactiveSpyder
The C50 is a Centofante. A 50th Anniversary knife commemorating Spyderco and this huge achievement, plus a nod to one of their great collaborators, masters in their own right plus a tribute to how much Sal has been able to pull makers like Frank C. and many others in to express themselves with Sal’s backing.
If Spyderco really wants to flex its muscles, then another possibility is a fluted Ti Military 2.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 9:38 pm
by sal
A lot of good suggestions, thanx. I also thought about a new model? I haven't had an opportunity to speak with Eric about any plans he might have for the 50th.
sal
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 9:47 pm
by SaltyCaribbeanDfly
I like the idea of the Worker Evolution Set in PE/SE made of Spy27 but if you’re thinking new model we’re all ears, it doesn’t really matter to me because I’m in whatever it is.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 10:00 pm
by cabfrank
Agreed. A set with PE/SE would be great, but an all new model, showcasing how far a great company has come, might be even better.
Re: Spyderco 50th Anniversary Knife?
Posted: Wed Mar 06, 2024 11:59 pm
by apollo
cabfrank wrote: ↑Wed Mar 06, 2024 4:56 pm
I agree with all of that, except the PE part. SE is a big part of Spyderco history.
Altough that is absalutely true.
Se just isnt popular the moment you get off this forum. The vast majority uses pe.
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 12:57 am
by Wartstein
apollo wrote: ↑Wed Mar 06, 2024 11:59 pm
cabfrank wrote: ↑Wed Mar 06, 2024 4:56 pm
I agree with all of that, except the PE part. SE is a big part of Spyderco history.
Altough that is absalutely true.
Se just isnt popular the moment you get off this forum. The vast majority uses pe.
Yes, but imo that is mostly because:
a) there is a lot more PE out there than good SE
b) While pretty much everyone who likes/prefers SE has real and extensive experience with BOTH PE and SE, most (not all though) people who prefer PE don't have extensive experience with SE in the way that they gave SE a try in different models, patterns, steels, edge angles. Something usually people do with PE...
So I think an SE or at least combo edge anniversary knife could help in "opening" some peoples mind to this edge type... and good SE IS indeed a very spyderco-ish thing...
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 1:40 am
by cabfrank
It is. "Spyderedge'.
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 1:42 am
by cabfrank
apollo wrote: ↑Wed Mar 06, 2024 11:59 pm
cabfrank wrote: ↑Wed Mar 06, 2024 4:56 pm
I agree with all of that, except the PE part. SE is a big part of Spyderco history.
Altough that is absalutely true.
Se just isnt popular the moment you get off this forum. The vast majority uses pe.
Y
I can't disagree with you. I wish i could.
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 2:55 am
by apollo
cabfrank wrote: ↑Thu Mar 07, 2024 1:42 am
apollo wrote: ↑Wed Mar 06, 2024 11:59 pm
cabfrank wrote: ↑Wed Mar 06, 2024 4:56 pm
I agree with all of that, except the PE part. SE is a big part of Spyderco history.
Altough that is absalutely true.
Se just isnt popular the moment you get off this forum. The vast majority uses pe.
Y
I can't disagree with you. I wish i could.
I get that. It isnt fun if you like something and you feel like you are outnumbered. I also found it very sad for the se fans when so many models in se got discontinued. If it was me i would not have done that but i just would have screwed down there production numbers to a lower point so it would definetly sell out easily enough.
Although i do get why with all factorys working at 100% and so many new designs in the freezer something always have to make way.
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 3:30 am
by aicolainen
I hope to see something useful, so it's at least a "worker" in spirit'. It's a lot easier for me to justify a working knife, than over the top materials that are just for looking at. Maybe add bolsters and micarta for a touch of style and throwback to days past, that would be nice enough to make it stand out. If I see damascus, zirconum or any of that fancy stuff it's probably a pass for me.
Maybe something new, but old. A design that went back in the drawer because the market wasn't considered right at the time, or it wasn't a viable business case because of manufacturing tech at time. That would excite me much more than something old just dressed up
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 5:15 am
by Albertaboyscott
Whatever it is, it should be a piece obtainable by all.
Theres enough sprints, flash batches and dealer exclusives out there already. Those are too limiting to who can purchase.
Spyderco is , unless I'm reading the room wrong, about people. So keep it simple and obtainabl for them. Maybe engrave a 50 on the pm2s (with spy27 steel) for the entire anniversary year. Easy to produce for Spyderco and easier for the majority of us collectors to buy. Just my 2 cents
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 8:18 am
by Wartstein
sal wrote: ↑Wed Mar 06, 2024 9:38 pm
A lot of good suggestions, thanx. I also thought about a new model? I haven't had an opportunity to speak with Eric about any plans he might have for the 50th.
sal
A new model would be really nice indeed.
Another option would be "new version / size of already popular model"
Can´t help, but there that "mid sized Native" comes to my mind again - Native being really popular, that "mid" or better "PM2 / Manix" size also, but not available in a Native yet, Golden made... sounds good to me personally for a Anniversary knife (below Kobolds "mock up" and pic from this thread
viewtopic.php?f=2&t=90338&start=40#p1546863)
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 8:53 am
by cjk
Wartstein wrote: ↑Thu Mar 07, 2024 8:18 am
sal wrote: ↑Wed Mar 06, 2024 9:38 pm
A lot of good suggestions, thanx. I also thought about a new model? I haven't had an opportunity to speak with Eric about any plans he might have for the 50th.
sal
A new model would be really nice indeed.
Another option would be "new version / size of already popular model"
Can´t help, but there that "mid sized Native" comes to my mind again - Native being really popular, that "mid" or better "PM2 / Manix" size also, but not available in a Native yet, Golden made... sounds good to me personally for a Anniversary knife (below Kobolds "mock up" and pic from this thread
viewtopic.php?f=2&t=90338&start=40#p1546863)
I would be more excited about this than anything else Spyderco might consider making, anniversary model or not.
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 10:02 am
by SaltyCaribbeanDfly
cjk wrote: ↑Thu Mar 07, 2024 8:53 am
Wartstein wrote: ↑Thu Mar 07, 2024 8:18 am
sal wrote: ↑Wed Mar 06, 2024 9:38 pm
A lot of good suggestions, thanx. I also thought about a new model? I haven't had an opportunity to speak with Eric about any plans he might have for the 50th.
sal
A new model would be really nice indeed.
Another option would be "new version / size of already popular model"
Can´t help, but there that "mid sized Native" comes to my mind again - Native being really popular, that "mid" or better "PM2 / Manix" size also, but not available in a Native yet, Golden made... sounds good to me personally for a Anniversary knife (below Kobolds "mock up" and pic from this thread
viewtopic.php?f=2&t=90338&start=40#p1546863)
I would be more excited about this than anything else Spyderco might consider making, anniversary model or not.
That makes two of us and probably way more than two!!!
Re: Spyderco 50th Anniversary Knife?
Posted: Thu Mar 07, 2024 10:52 am
by Tristan_david2001
A calypso 3.5”
A size between the mid size jr. and large c54
