Spyderco Forums

Posted: **Sat Apr 29, 2023 9:15 am**

Looks great ! Definitely will get one after I complete another project . Thanks for picture . MG2

Posted: **Sun May 14, 2023 7:45 pm**

I ordered the Titanium Purple Anodized. I'll post up a pick when it comes in, but it'll be a while before I can install it.

I initially tried to use Amazon Pay but received this message after logging in, "Amazon Pay not available for this site."

Posted: **Wed Jul 05, 2023 5:10 pm**

RadioactiveSpyder wrote: ↑
Thu Apr 14, 2022 9:24 pm
RC Bladeworks is offering them under the 2-scale made-to-order section of his website.

Are they still available? I can Just find scales for the Full Liner Sprint Run Version.

Posted: **Thu Jul 06, 2023 6:51 am**

Dear Vincenzo555:

Welcome to the Spyderco Forum.

Stay safe,

Mike

Posted: **Thu Jul 06, 2023 7:13 am**

Vincenzo555 wrote: ↑
Wed Jul 05, 2023 5:10 pm

RadioactiveSpyder wrote: ↑
Thu Apr 14, 2022 9:24 pm
RC Bladeworks is offering them under the 2-scale made-to-order section of his website.
Are they still available? I can Just find scales for the Full Liner Sprint Run Version.

I believe "Full Liner Sprint Run Version" is an error. Those should be the scales that fit the factory Cruwear & Micarta PM2's.

Posted: **Thu Jul 06, 2023 7:22 am**

Buddafucco wrote: ↑
Thu Jul 06, 2023 7:13 am

Vincenzo555 wrote: ↑
Wed Jul 05, 2023 5:10 pm

RadioactiveSpyder wrote: ↑
Thu Apr 14, 2022 9:24 pm
RC Bladeworks is offering them under the 2-scale made-to-order section of his website.
Are they still available? I can Just find scales for the Full Liner Sprint Run Version.

I believe "Full Liner Sprint Run Version" is an error. Those should be the scales that fit the factory Cruwear & Micarta PM2's.

Thank you very much!! After some "Research" i think its an error to. Im new to the Spyderco world and thaught "SprintRun" would be another Special model ...didnt know that they are very much SprintRun versions and that they are Same build like the standard version ^^

Posted: **Thu Jul 06, 2023 11:57 am**

….,

Posted: **Thu Jul 06, 2023 12:34 pm**

HolySteel wrote: ↑
Thu Jul 06, 2023 11:57 am
I have three CruCartas. One was bought 2nd-hand and was not centered. I bought a Hoback backspacer for it, which helped considerably. A 2nd new one was also centered poorly. The 3rd was perfect. So...given how mismatched in color the scales on the first one were, I took them off, boiled and dyed them. I put it back together without the backspacer and was able to get the blade centered. I suspect that boiling them helped restore their shape, but that's just speculation.

I decided to try the backspacer in the 2nd one, as it matched the new deep-carry clip, but sanded it first so that its look would match the rest of the hardware a little better. I'm very happy with the results (blue is my favorite color), but it was **** to get the thing apart and back together so the backspacer has not yet been added to the knife. Here's the knife and the sanded/polished backspacer:

Thank you for the Tip. Your blue one Looks great!!

. I didnt Receiver my crucarta yet, ordered it yesterday. Hope the Blade will be centered^^ I think i will get the Backpacker and other scales to. The Main reason i ordered it was the Steel ^^

Posted: **Fri Jul 07, 2023 9:18 am**

Vincenzo555 wrote: ↑
Thu Jul 06, 2023 12:34 pm
Thank you for the Tip. Your blue one Looks great!!. I didnt Receiver my crucarta yet, ordered it yesterday. Hope the Blade will be centered^^ I think i will get the Backpacker and other scales to. The Main reason i ordered it was the Steel ^^

Thanks. Good luck with this project. If you have not disassembled a PM2 before, please watch a video.

Posted: **Sat Jul 29, 2023 8:19 pm**

Hey! AWT is making aluminum scales for the Crucarta PM2.
https://appliedweaponstech.com/products ... s-cerakote

I finally installed the Hoback backspacer in mine. Fits. Looks nice. Provides additional support around the lock area. I like it. Didn't come purple anodized, though.

Posted: **Sun Jul 30, 2023 9:54 am**

Anyone make high-polish or chrome version? I want one that matches the liners

Posted: **Sun Jul 30, 2023 12:11 pm**

I know Jake and I imagine if you contact him he’ll make one for you… I’m actually about to ask him for the same thing for one of mine.

Spyderco Forums

PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket scales and backspacers?

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers

Re: PM2 Micarta Cruwear aftermarket backspacers