Page 3 of 4
Re: 2020 reveal predictions?
Posted: Sat Jan 04, 2020 2:20 pm
by Pancake
Wartstein wrote: ↑Sat Jan 04, 2020 2:08 pm
You know that the HAP 40 Stretch 1 Sprint is still available for a reasonable price? (And in that exact configuration imho perhaps the very best EDC folder ever made :D )?
I know that :D but it is such a pain in the neck to ship one in my archaic country and then get ripped off on taxes that is not even worth it....but I thought about it very hard at one point in time.....maybe I'll get one :D
Re: 2020 reveal predictions?
Posted: Sat Jan 04, 2020 4:53 pm
by VooDooChild
Well since it wasnt in the new catalog we all know the pacific salt 2 will be in one of the reveals. Im hoping we will see a wharncliffe version and a spyderhawk 2 salt as well.
Re: 2020 reveal predictions?
Posted: Sun Jan 05, 2020 2:17 pm
by AwayFromMySpydieHole
I really hope there’s a grey/maxamet Para 3 lightweight in one of these reveals....
Re: 2020 reveal predictions?
Posted: Sun Jan 05, 2020 2:24 pm
by Albatross
AwayFromMySpydieHole wrote: ↑Sun Jan 05, 2020 2:17 pm
I really hope there’s a grey/maxamet Para 3 lightweight in one of these reveals....
While they're at it, a grey Maxamet manix 2 g10 would be awesome.
Re: 2020 reveal predictions?
Posted: Mon Jan 06, 2020 7:35 am
by Cscottsss
AwayFromMySpydieHole wrote: ↑Sun Jan 05, 2020 2:17 pm
I really hope there’s a grey/maxamet Para 3 lightweight in one of these reveals....
I hope so! I'd be all over that. :D
Re: 2020 reveal predictions?
Posted: Mon Jan 06, 2020 9:11 am
by Mordhaus
Sprint run smock
Re: 2020 reveal predictions?
Posted: Mon Jan 06, 2020 2:09 pm
by jaysus145
I have been dreaming about a PM 2 LW, so my fingers are crossed for that.
Re: 2020 reveal predictions?
Posted: Mon Jan 06, 2020 3:48 pm
by elena86
Slipjoint Kapara
Lil'Chokwe
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 6:41 am
by pantagana23
Tenacious backlock
Lil Native backlock in 20CV and wire deep carry clip, jimping added on both sides
Dragonfly in smurf blue M390
Left hand Para3
My wishlist can go forever :D
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 9:57 am
by Wartstein
pantagana23 wrote: ↑Tue Jan 07, 2020 6:41 am
Tenacious backlock
Lil Native backlock in 20CV and wire deep carry clip, jimping added on both sides
Dragonfly in smurf blue M390
Left hand Para3
My wishlist can go forever :D
MAN! This in a somewhat "better" steel (VG10, S30V, BD1N would be perfectly fine) could easily become one of my absolute favorites... :rolleyes:
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 10:37 am
by Pancake
Wartstein wrote: ↑Tue Jan 07, 2020 9:57 am
MAN! This in a somewhat "better" steel (VG10, S30V, BD1N would be perfectly fine) could easily become one of my absolute favorites... :rolleyes:
Backlock with blade all the way to the handle would be awesome.
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 10:47 am
by pantagana23
Pancake wrote: ↑Tue Jan 07, 2020 10:37 am
Wartstein wrote: ↑Tue Jan 07, 2020 9:57 am
MAN! This in a somewhat "better" steel (VG10, S30V, BD1N would be perfectly fine) could easily become one of my absolute favorites... :rolleyes:
Backlock with blade all the way to the handle would be awesome.
Excatly my point.
Though this would get a "fingercutter" nickname in no time.
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 10:48 am
by toocool006
elena86 wrote: ↑Mon Jan 06, 2020 3:48 pm
Slipjoint Kapara
Lil'Chokwe
THIS PLEASE :D :D :D
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 3:01 pm
by Wartstein
pantagana23 wrote: ↑Tue Jan 07, 2020 10:47 am
Pancake wrote: ↑Tue Jan 07, 2020 10:37 am
Wartstein wrote: ↑Tue Jan 07, 2020 9:57 am
MAN! This in a somewhat "better" steel (VG10, S30V, BD1N would be perfectly fine) could easily become one of my absolute favorites... :rolleyes:
Backlock with blade all the way to the handle would be awesome.
Excatly my point.
Though this would get a "fingercutter" nickname in no time.
But why? A backlock can be closed safer than even a comp lock concerning finger safety... :confused:
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 7:03 pm
by VooDooChild
Wartstein wrote:
pantagana23 wrote: ↑Tue Jan 07, 2020 10:47 am
Pancake wrote: ↑Tue Jan 07, 2020 10:37 am
Wartstein wrote: ↑Tue Jan 07, 2020 9:57 am
MAN! This in a somewhat "better" steel (VG10, S30V, BD1N would be perfectly fine) could easily become one of my absolute favorites... :rolleyes:
Backlock with blade all the way to the handle would be awesome.
Excatly my point.
Though this would get a "fingercutter" nickname in no time.
But why? A backlock can be closed safer than even a comp lock concerning finger safety... :confused:
Come on buddy, you know why. Cause the only people doing the advanced midbacklock close are like you and 2 other people. The rest of us heathens are dropping the unsharpened portion right onto our forefinger.
Re: 2020 reveal predictions?
Posted: Tue Jan 07, 2020 10:28 pm
by Wartstein
VooDooChild wrote: ↑Tue Jan 07, 2020 7:03 pm
Wartstein wrote:
pantagana23 wrote: ↑Tue Jan 07, 2020 10:47 am
Pancake wrote: ↑Tue Jan 07, 2020 10:37 am
Backlock with blade all the way to the handle would be awesome.
Excatly my point.
Though this would get a "fingercutter" nickname in no time.
But why? A backlock can be closed safer than even a comp lock concerning finger safety... :confused:
Come on buddy, you know why. Cause the only people doing the advanced midbacklock close are like you and 2 other people. The rest of us heathens are dropping the unsharpened portion right onto our forefinger.
Hobestly, I became quite reluctant to post anything about bscklocks cause of the risk to initiate another useless "backlock brigade"- discussion...
But in that case: I really thought people use the "dropping unsharpened portion on forefinger" method cause it is just
convinient, not cause they
have to... and they would just switch to another method if there IS no "unsharpened portion".... and certainly NOT drop the sharp blade on the forefinger and then call the knife a "finger cutter" Would be rather silly to do so, wouldn't it?!
Re: 2020 reveal predictions?
Posted: Wed Jan 08, 2020 4:55 am
by pantagana23
Wartstein wrote: ↑Tue Jan 07, 2020 10:28 pm
VooDooChild wrote: ↑Tue Jan 07, 2020 7:03 pm
Wartstein wrote:
pantagana23 wrote: ↑Tue Jan 07, 2020 10:47 am
Excatly my point.
Though this would get a "fingercutter" nickname in no time.
But why? A backlock can be closed safer than even a comp lock concerning finger safety... :confused:
Come on buddy, you know why. Cause the only people doing the advanced midbacklock close are like you and 2 other people. The rest of us heathens are dropping the unsharpened portion right onto our forefinger.
Hobestly, I became quite reluctant to post anything about bscklocks cause of the risk to initiate another useless "backlock brigade"- discussion...
But in that case: I really thought people use the "dropping unsharpened portion on forefinger" method cause it is just
convinient, not cause they
have to... and they would just switch to another method if there IS no "unsharpened portion".... and certainly NOT drop the sharp blade on the forefinger and then call the knife a "finger cutter" Would be rather silly to do so, wouldn't it?!
Ok, you all know what I meant.
But let's get back to the product - who else thinks Tenacious back lock would be a good idea and would buy one or more if available?
I know I would, because of 2 things: edge length = blade length and the design, if left unchanged from outside.
Re: 2020 reveal predictions?
Posted: Wed Jan 08, 2020 5:10 am
by Wartstein
pantagana23 wrote: ↑Wed Jan 08, 2020 4:55 am
....
But let's get back to the product - who else thinks Tenacious back lock would be a good idea and would buy one or more if available?
I know I would, because of 2 things: edge length = blade length and the design, if left unchanged from outside.
I would definitely buy one, for the reasons you mentioned! But again, I'd like a bit of a "steel upgrade" (VG10, S30V, BD1N...) and the FRN LW version and/or SE would be the icing on the cake...
Re: 2020 reveal predictions?
Posted: Wed Jan 08, 2020 5:25 am
by Pancake
pantagana23 wrote: ↑Wed Jan 08, 2020 4:55 am
Ok, you all know what I meant.
But let's get back to the product - who else thinks Tenacious back lock would be a good idea and would buy one or more if available?
I know I would, because of 2 things: edge length = blade length and the design, if left unchanged from outside.
Maybe I am weird, but I would like to see it made in Golden, with better steel, as a mid-end model.
I think that backlock with edge all the way to the handle would fill the gap in production.
Re: 2020 reveal predictions?
Posted: Wed Jan 08, 2020 5:53 am
by Wartstein
Pancake wrote: ↑Wed Jan 08, 2020 5:25 am
pantagana23 wrote: ↑Wed Jan 08, 2020 4:55 am
Ok, you all know what I meant.
But let's get back to the product - who else thinks Tenacious back lock would be a good idea and would buy one or more if available?
I know I would, because of 2 things: edge length = blade length and the design, if left unchanged from outside.
Maybe I am weird, but I would like to see it made in Golden, with better steel, as a mid-end model.
I think that backlock with edge all the way to the handle would fill the gap in production.
In that case I'm weird too... :D