Show your mods!

[Psj78]

Tenacious...


"Poon" blade mod
Etched & stonewashed blade, clip, liners, pivot, hardware
Sharpening choil mod
Frag copper Flytanium scales
Gray g10 backspacer

[Psj78]

Tenacious...


Lager g10 "Anso" pattern scales
Sharpening choil mod
Etched & stonewashed blade, liners, clip, pivot and hardware
Blue g10 backspacer

[Psj78]

Para 3...


Cerberus purple micarta hex skinny scales
RGT purple anodized titanium hardware
Sharpening choil mod
Etched & stonewashed liners
Rockscale Designs blurple backspacer/lanyard tube combo
Lynch purple anodized deep carry clip

[Psj78]

Para 3...


Cuscadi frag green micarta "stryderco" scales & backspacer
Sharpening choil mod
Bronze heat ano'd liners, pivot, & hardware
Etched & stonewashed blade
MXG stonewashed deep carry clip

[Psj78]

Yojimbo 2...


Sharpening choil mod
RGT blue teroturf scales
Aramis blue g10 backspacer
Etched liners
Blue/bronze heat ano'd pivot & hardware
Lynch feather blue color filled deep carry clip

[Psj78]

Ambitious....


Green g10/pinecone needle acrylic scales
Etched & stonewashed blade, liners, clip, & scale screws
Bronze heat ano'd pivot & clip screws
Sharpening choil mod
Jade g10 backspacer

[Psj78]

Slysz Bowie...


RGT Camo skins
RGT clip

[Psj78]

Bug...

Etched & stonewashed everything
Sharpening choil mod

[Psj78]

Brouwer....

RC Bladeworks natural micarta w/ maroon micarta inlay show side scale
Bronze heat ano'd hardware, pivot, and standoffs
MXG stonewashed deep carry clip
Polished washers, liners, and blade washer area

[Psj78]

Delicate 4....

Brown micarta scales
Bronze heat ano'd pivot, hardware, and back spring
Flytanium copper backspacer
Lynch bronze/blurple heat ano'd deep carry clip
Polished washers, liners, blade tang, and blade washer area
Sharpening choil mod

[Psj78]

PM2....

RGT seafoam green teroturf scales
RGT stonewashed hexagon clip
Green ano'd titanium lanyard tube
Bronze heat ano'd pivot, hardware, liners, and stop pin
Green paper micarta backspacer
Sharpening choil mod

[Psj78]

Gayle Bradley 2....

Sheppard CC frag purple micarta scales
Blue ano'd titanium pivot and scale screws
Blurple heat ano'd clip screws, stop pin, and standoffs
Lynch blue ano'd deep carry clip
Etched and stonewashed blade and liners
Sharpening choil mod
Detent hole enlargement

[Psj78]

PM2...

Etched & stonewashed blade, liners, pivot, lanyard tube, and scale screws
RGT green micarta scales
Sharpening choil mod
RGT woodland camo skins
Lynch stonewashed deep carry clip
Flytanium backspacer etched in Whinks

[Psj78]

Shaman.....

Cerberus doppler green micarta scales
Bronze heat ano'd pivot, liners, and hardware
Lynch bronze deep carry clip
Flytanium brass backspacer
Sharpening choil mod

[Psj78]

Smock...

ReyLight stonewashed frag titanium scales
Etched & stonewashed pivot and hardware
Meteon Boss green ano'd titanium lock button and backspacer
Lynch green ano'd deep carry clip
Skiff bearings
Etched liners

[Psj78]

PM2....and my favorite knife outta the 160+ I own lol....

Reylight stonewashed frag titanium scales
RGT green ano'd titanium pivot and hardware
Bronze heat ano'd liners
Rockscale Designs stonewashed backspacer/lanyard tube
MXG stonewashed deep carry clip
Etched stop pin

[Red Leader]

Choppified Manix (7.5" OAL) with fabricated crossbar lock. Still a work in progress...

[Makunochimaster]

3D printed press lock

[Ocho]

Spyderco semiscerated tenacious with titanium scales and titanium deep carry clip.

[Brock O Lee]

This scale swap made me happy...

Starring:
Military S110V Blurple G10
Military 52100 CF

I tried this previously by swapping only the blades. That did not work. Both blades were heavily off-center and rubbed the scales. I was puzzled, tried a few different things, but no luck. So I aborted the idea.

This time I swapped only the scales. I also sanded down a few small burrs around the liner holes on both knives, that I did not notice before. That did the trick. They both came out with solid lockup, no play, and perfectly centered.



Already doing some pruning in the yard today. Perhaps this is just me, but I don't want fancy carbon fiber on my work knives.


A nicely dressed premium-looking stainless M1, for EDC.