Re: Manix 2 rex45 g10 model
Posted: Thu Mar 19, 2020 5:08 pm
Still in stock. I'm surprised.
Spyderco Forums
Manix 2 rex45 g10 model
Page 14 of 15
Re: Manix 2 rex45 g10 model
Posted: Mon Mar 23, 2020 7:56 am
I was suckered in to my first ever backup knife...sitting around at National Knives for so long, I couldn't resist!
Re: Manix 2 rex45 g10 model
Posted: Tue Mar 24, 2020 4:21 am
I'm in doubt. I love rex 45 but 180 euros is a bit steep. I was under the impression that it would be a little lower..
Re: Manix 2 rex45 g10 model
Posted: Tue Mar 24, 2020 8:30 pm
KnivesPlus in stock
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 12:48 pm
A question to those of you who have the G10 Manix 2 in Rex 45 and at least one other Manix model (regardless if LW or G10):
The specs on Spydercos hompepage are for most Manixes (Manices?):
Blade: 3.37" (86mm); Edge 2.88" (73mm)
But for the Rex 45 Manix:
Blade: Again 3.37" (86mm), but EDGE: 2,95" (75mm)
Now call me crazy, but in THIS particular size category I am looking for each mm more that I can get in cutting edge.
Really not the most important thing in the world for me, but still something I value...
So: Can anyone confirm that the REX 45 Manix actually has a bit more edge than other Manixes?
(If so, on the flip side it should have a choil that is a tad shorter - actually that is the case with the Straight Spine Stretch 2 compared to the regular Stretch 2: About the same blade length, but the SS version has a bit less choil and a bit more cutting edge)
The specs on Spydercos hompepage are for most Manixes (Manices?):
Blade: 3.37" (86mm); Edge 2.88" (73mm)
But for the Rex 45 Manix:
Blade: Again 3.37" (86mm), but EDGE: 2,95" (75mm)
Now call me crazy, but in THIS particular size category I am looking for each mm more that I can get in cutting edge.
Really not the most important thing in the world for me, but still something I value...
So: Can anyone confirm that the REX 45 Manix actually has a bit more edge than other Manixes?
(If so, on the flip side it should have a choil that is a tad shorter - actually that is the case with the Straight Spine Stretch 2 compared to the regular Stretch 2: About the same blade length, but the SS version has a bit less choil and a bit more cutting edge)
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 1:42 pm
Those may be accurate numbers. It's hard to capture in pics, but the rex45 edge does appear to be 1 or 2mm longer than both my 52100 and my cruwear (although I guess sharpening could be the cause on mine, too).Wartstein wrote: ↑Sat Apr 04, 2020 12:48 pmA question to those of you who have the G10 Manix 2 in Rex 45 and at least one other Manix model (regardless if LW or G10):
The specs on Spydercos hompepage are for most Manixes (Manices?):
Blade: 3.37" (86mm); Edge 2.88" (73mm)
But for the Rex 45 Manix:
Blade: Again 3.37" (86mm), but EDGE: 2,95" (75mm)
Now call me crazy, but in THIS particular size category I am looking for each mm more that I can get in cutting edge.
Really not the most important thing in the world for me, but still something I value...
So: Can anyone confirm that the REX 45 Manix actually has a bit more edge than other Manixes?
(If so, on the flip side it should have a choil that is a tad shorter - actually that is the case with the Straight Spine Stretch 2 compared to the regular Stretch 2: About the same blade length, but the SS version has a bit less choil and a bit more cutting edge)
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 2:06 pm
Hmm, that's weird. I just lined up my Cruwear, 20CV, 52100 and Rex45. Cutting edge, to the naked eye appears to be the same on all 4.
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 2:22 pm
I measured most of my Manixes and found the following:Wartstein wrote: ↑Sat Apr 04, 2020 12:48 pmA question to those of you who have the G10 Manix 2 in Rex 45 and at least one other Manix model (regardless if LW or G10):
The specs on Spydercos hompepage are for most Manixes (Manices?):
Blade: 3.37" (86mm); Edge 2.88" (73mm)
But for the Rex 45 Manix:
Blade: Again 3.37" (86mm), but EDGE: 2,95" (75mm)
Now call me crazy, but in THIS particular size category I am looking for each mm more that I can get in cutting edge.
Really not the most important thing in the world for me, but still something I value...
So: Can anyone confirm that the REX 45 Manix actually has a bit more edge than other Manixes?
(If so, on the flip side it should have a choil that is a tad shorter - actually that is the case with the Straight Spine Stretch 2 compared to the regular Stretch 2: About the same blade length, but the SS version has a bit less choil and a bit more cutting edge)
Rex 45 and M390 are 75.6mm (2.975”)
Cruwear and XHP are 75.2mm (2.96”)
Even the S110V that I chipped some of the tip off of is still 73.0mm (2.875”)
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 2:38 pm
.
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 3:48 pm
TkoK83Spy wrote: Hmm, that's weird. I just lined up my Cruwear, 20CV, 52100 and Rex45. Cutting edge, to the naked eye appears to be the same on all 4.
Thanks to all of you for taking the time and comparing / measuring your Manix´s ! (And even taking pics!) :)
I guess, differently to SS Stretch 2 vs regular Stretch 2, all the Manix models will generally have the same blade-, edge- and choil-length and the different specs are probably just measurment deviations...
As said, not a big deal anyway, but a longer edge (even by just 2mm) would ONE of many factors I´d consider when deciding between different Manix variants.
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 3:49 pm
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 3:50 pm
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 4:06 pm
They are more than precise! :)
Still, the Manix measurements given in the catalogue or reveal are interesting generally (though this is not relevant in a practical sense at all):
The blade length seems to be always the same, while the edge length varies by 1 or 2 mm (for example reveal 4, Rex 45 Manix LW vs G10) - which should consequently mean that the blade part of the choils is are of the exact same length in every model.
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 4:38 pm
At the time, nothing to contribute :p
But I did look at my M4 and XHP models, and they are very close to same. XHP has been sharpened more, so a bit shorter.
Re: Manix 2 rex45 g10 model
Posted: Sat Apr 04, 2020 7:27 pm
Bento Box Shop:
"Spyderco Plain Edge CPM-REX 45 Burnt Orange G-10 Manix 2
(This new release is in stock & ready to ship!) $299.95 "
Vaguely annoying.
"Spyderco Plain Edge CPM-REX 45 Burnt Orange G-10 Manix 2
(This new release is in stock & ready to ship!) $299.95 "
Vaguely annoying.
Re: Manix 2 rex45 g10 model
Posted: Mon Apr 06, 2020 1:43 am
Cutlery Shoppe seems to have some stock
Re: Manix 2 rex45 g10 model
Posted: Mon Apr 06, 2020 7:57 am
Yes, a 138% markup is vaguely annoying. Lol. Yet some on here will defend their business model tooth and nail. :confused:
Re: Manix 2 rex45 g10 model
Posted: Mon Apr 06, 2020 8:50 am
Yes, not least Spyderco, that bastion of bad-business practice and poor customer-relations, not to forget authorizer of bad actors. /ssteelcity16 wrote: ↑Mon Apr 06, 2020 7:57 amYet some on here will defend their business model tooth and nail. :confused:
Re: Manix 2 rex45 g10 model
Posted: Mon May 11, 2020 6:11 am
What the heck I just did......
Yesterday I was browsing knivesandtools and they had REX 45 Manix still in stock.....a bit more expensive then I saw on other european shops, but somehow my brain just stopped working and I ordered one......I guess this is my Spyderco folder purchase for this year.
Yesterday I was browsing knivesandtools and they had REX 45 Manix still in stock.....a bit more expensive then I saw on other european shops, but somehow my brain just stopped working and I ordered one......I guess this is my Spyderco folder purchase for this year.
Re: Manix 2 rex45 g10 model
Posted: Mon May 11, 2020 6:29 am
Pancake wrote: ↑Mon May 11, 2020 6:11 amWhat the heck I just did......
Yesterday I was browsing knivesandtools and they had REX 45 Manix still in stock.....a bit more expensive then I saw on other european shops, but somehow my brain just stopped working and I ordered one......I guess this is my Spyderco folder purchase for this year.
Congrats!! :)
So you did what I was very, very close to...
I am sure this must be a great knife, I myself did not pull the trigger in the end solely cause I am trying to focus on SE blades
But, to be honest: I am already thinking of getting the Manix LW (which does NOT come in SE...) - REX 45 (when it comes out finally) or in translucent blue and the "new" steel CTS BD1 N (I had the black one one in CTS BD1, and like it at lot) :rolleyes: