Page 2 of 3
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 12:42 am
by Enactive
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
I'd be down for multiple K390 Jesters, but also really like your idea for an LN with Jester inspired blade.
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 12:37 pm
by Fine Swine
I want a denim micarta Jester, and I don't really even care what steel they choose.
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 2:29 pm
by dsm
Yes, any Jester would be welcome in my collection, but especially a K390 variant.
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 2:35 pm
by bleasure
yall goin wild
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 2:44 pm
by twinboysdad
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
Make this in Backlock and take my money
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 2:51 pm
by Ramonade
Any "affordable" way to buy a Jester in the EU would get my money !
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 2:59 pm
by Tristan_david2001
Micarta or stainless steel handle and I’d pick up one
Re: Production K390 Jester
Posted: Sat Mar 18, 2023 3:36 pm
by Skar
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
I like this n5 adaption.
I don’t have any interest in a key chain knife, all the power to you that like it though.
Re: Production K390 Jester
Posted: Sun Mar 19, 2023 9:48 pm
by steelcity16
sal wrote: ↑Thu Mar 16, 2023 10:59 pm
Sharp Guy wrote: ↑Thu Mar 16, 2023 10:57 pm
Maybe it is already in the works
Though
we wouldn't be able to add it as regular production, but it would make a nice Sprint for those that didn't get a chance to "taste" the design when they were out.
sal
Curious why??
Re: Production K390 Jester
Posted: Sun Mar 19, 2023 9:49 pm
by steelcity16
Any new Jester I am in for. K390, Cruwear, Crucarta, G10-Carta, H1 SE Salt, whatever.
Re: Production K390 Jester
Posted: Mon Mar 20, 2023 7:25 am
by steelcity16
I also wouldn't mind seeing a Jester in a Manbug handle.
Re: Production K390 Jester
Posted: Mon Mar 20, 2023 7:30 am
by olywa
+1 on the ManJester. In the meantime we can feast on the soon-to-be-released leaf blade Manbug.
Re: Production K390 Jester
Posted: Sat Apr 29, 2023 12:01 am
by CDEP
A K390 Sprint followed by a DLC Cruwear OD Green DLT exclusive would be instant buys for me.
Re: Production K390 Jester
Posted: Sat Apr 29, 2023 5:00 am
by Evil D
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
I could not like this concept any more than I do. I can feel my thumb stretching out over that blade. Great idea, perfect for a small frame knife like the Lil Native so you can easily get your thumb or index finger on the forward spine-choil spot.
Only thing that could make this better for utility use might be to make it a wharncliffe, but this version would also be great for skinning.
Re: Production K390 Jester
Posted: Sat Apr 29, 2023 9:01 am
by Doc Dan
I would like a slip joint similar to that, with a nice thin blade.
Re: Production K390 Jester
Posted: Sun Apr 30, 2023 8:17 am
by Doc Dan
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
Remove that finger bump and make the handle a bit more neutral and you might have something.
Re: Production K390 Jester
Posted: Sun Apr 30, 2023 8:38 am
by HolySteel
Fine Swine wrote: ↑Sat Mar 18, 2023 12:37 pm
I want a denim micarta Jester, and
I don't really even care what steel they choose.
I can't believe I am reading such blasphemy on this forum
.
I got some denim micarta scales for a Mule, as 'pattern' scales. I would love them contoured, but not so much flat - it's like wrapping a knife handle in faded bluejeans.
Re: Production K390 Jester
Posted: Sun Apr 30, 2023 11:31 am
by austrian_spyder_fan
I like this design.
Also the Jesterfly whould be a nice option.
ASF
Re: Production K390 Jester
Posted: Sun Apr 30, 2023 12:11 pm
by Bemo
austrian_spyder_fan wrote: ↑Sun Apr 30, 2023 11:31 am
I like this design.
Also the Jesterfly whould be a nice option.
ASF
I've never been able to get the Jesterfly out of my mind since I saw the mock up. Getting a couple Jesters didn't help either. I'd take the Jesterfly over the Lil' Jester Native (hmmm in many Native American traditions, the Coyote is often referred to as a Jester....)
Re: Production K390 Jester
Posted: Sun Apr 30, 2023 2:28 pm
by ZrowsN1s
Evil D wrote: ↑Sat Apr 29, 2023 5:00 am
ZrowsN1s wrote: ↑Fri Mar 17, 2023 11:59 pm
While we're throwing spaghetti at the wall, a Jester Blade Lil Native could have some potential. Ditch the thumb hole hump and keep it flat like the lil native and then have it dip into a generous Jester style thumb divot. Keep the saber grind and tip the same. Would be a little tank of a knife.
Some quick and dirty photo shop, I tried to keep it within the borders of the lil native blade so it should fit the handle, obviously they'd need to tweak it a little to find the optimal fit.
I don't mind what you call it. I would use one of these.
I could not like this concept any more than I do. I can feel my thumb stretching out over that blade. Great idea, perfect for a small frame knife like the Lil Native so you can easily get your thumb or index finger on the forward spine-choil spot.
Only thing that could make this better for utility use might be to make it a wharncliffe, but this version would also be great for skinning.
A straight (or straighter) edge is a good idea. I tend to prefer them to the more curved skinner type blade shapes. As you say much more geared to utility