Spyderco Forums

Sign me up as well for a cruwear Shaman. The recent testimonials to the corrosion resistance of that steel has made it much more intriguing.

FFG Pacific Salt as a new go to EDC.

DLC or stainless Police 4. Bonus points for FRN lightweight. I love the P3 but I'm waiting for more corrosion resistance before I buy a 4.

Maxamet UKPK.

Although I think it should be regular production, rather than a sprint. :)

Vivi reminded me... I also am awaiting some DLC Maxamet. Maxamet that I can take to work and not worry about salt water exposure sounds perfect!

Military.

Dealers choice.

Have fun with is Sal.

I'd like to try something smaller than my Para3 so I'll consider any future sprint of the Lil Native.

K390 pattada
Lc200n Pacific salt
More non stainless steel in general but also more lc200n or vanax

*M390 & peel ply Carbon fiber PM2
* Cpm 10v or pmA11 PM2 or Shaman.
*M390 Shaman
*S125v mule :)

wrdwrght wrote: ↑

Mon May 14, 2018 11:55 am

Realistically, the announced Super Blue Calypso Jr.

This ^

I'd like to see a sliverax or lil native compression lock in an upgraded steel

A native or manix in something from the m390 family

I am really liking cruwear - just barely got some.

Something over 3 inches with a lockback and Cruwear. First choice is an Endura Titanium with Cruwear at rc 62. I would find the money pretty quickly and buy two if possible.

Joe

EngDevGr3 wrote: ↑

Mon May 14, 2018 5:28 pm

*M390 & peel ply Carbon fiber PM2
* Cpm 10v or pmA11 PM2 or Shaman.
*M390 Shaman
*S125v mule :)

Yup! Peel ply carbon fiber PM2 M390!

Manix 2 LW and Para 3 CTS204P: both forest green.
Lil Native S90V or M390 or CruWear or...
Calypso 4 inch HAP40 with forest green G10.
Paramilitary 2 LC200N light weight with DLC hardware, linerless FRN on one side, with DLC compression lock smartly mounted into FRN on the other side. Please good people at Spyderco, and thanx much.

CBBL Manix with a K490 blade and linerless PLUM G10

I would really like a Calypso as well, with UNclad SGPS or SRS-15.

Spydergirl88 wrote: ↑

Mon May 14, 2018 11:26 am

More flavors of Lil Native Compression Lock

Co-sign. A Lil Native in CTS-XHP sounds nice. Maybe with dark green or dark red Nishijin scales; I think that'd look pretty sweet.

After getting an old Blackhawk yesterday, I’m now waiting for a native5 sprint run with a clip point :D

DirtMcGirt wrote: ↑

Tue May 15, 2018 8:38 am

After getting an old Blackhawk yesterday, I’m now waiting for a native5 sprint run with a clip point :D

I could like this a lot .... round down the back of the choil like the Blackhawk and be even happier.

But actually I'm waiting for a Centofante 3 sprint (that's not going to change until it happens or I get told that it's impossible)

Models: Native 5, Lil' Native Backlock, Lil' Native Compression Lock, Manix 2 Backlock, Manix 2, Para 3, PM2, Military, Shaman
Steels: 3V, 4V, Cruwear, 52100, M4
Scales: Jade G10, Red G10, Blurple G10, Peel Ply Carbon Fiber, any new G10 color (Charcoal Smoke, Brown Smoke, Day Glow Yellow, Day Glow Orange, Forest Green) in a semi-translucent form similar to the translucency of the Blurple and Red

Basically any combination of the above models, steels, scales I'd be a buyer of. Seems like an infinite amount of options, but sadly there is nothing in any of these combos currently for sale aside from the 52100 PM2 in PPCF, which I already have. I know the Jade Native 5 M4 is coming and I will be getting that!

I would also take a lightwight Native or lighweight Manix in any of the above steels with a decent color of FRN. Maybe a deep Burgundy, Dark Navy, Dark Forest Green, etc. I'd also be cool with Orange, Foliage Green, or British Racing Green. DLC options always a plus as well!

The other thing I would love to see is a Salt series of the Golden-Made G10 Models. Semi-translucent Day Glow Yellow G10, with LC200N for PE, and H1 for the serrated edge versions. Satin and DLC coated options for each model. And on the DLC ones have all of the liners, clips, hardware, screws, etc coated in DLC or black whatever as well. The DLC coated Jade M4 Manix is the best looking Spyderco I have ever seen with the contrast of the black liners, hardware and blade against the Jade. I think a Serrated Edge H1 blade and all black hardware AND liners (not sure why BHQ didnt coat the liners on the PM2 like they did the Manix??? FAIL...) against a semi-translucent DayGlow yellow G10 would be AMAZING on any of the Golden models. Native, PM2, Para 3, Shaman, etc! I'd buy 'em all in mass quantities!!!

Titanium PM2 with a Reeve Integral Lock in any stainless steel blade. One scale peel-ply carbon fiber could also add a touch of class.

Hopweaver wrote: ↑

Tue May 15, 2018 11:59 am

Titanium PM2 with a Reeve Integral Lock in any stainless steel blade. One scale peel-ply carbon fiber could also add a touch of class.

I'd be in for this.

I'd really like to see all black Dragonfly Salts in PE and SE! My Yellow DF2 Salt is one of my favorite knives and I carry it often in the summer due to the lightweight and wire clip. I'd LOVE an all black (black FRN and black coated Blade) option!