Re: CPM 15v Manix 2
Posted: Wed Jul 16, 2025 4:24 pm
Dupe
Spyderco Forums
CPM 15v Manix 2
Page 78 of 79
Re: CPM 15v Manix 2
Posted: Wed Jul 16, 2025 4:25 pm
Double Dupe
Re: CPM 15v Manix 2
Posted: Wed Jul 16, 2025 5:42 pm
4speed manual transmissionEnactive wrote: ↑Wed Jul 16, 2025 10:12 amCool. Thanks.Those are cute little cars. What sort of transmission does it have?
Re: CPM 15v Manix 2
Posted: Wed Jul 16, 2025 9:09 pm
Mine arrived today. Can't make a determination on a "sample of one," but if I could, I'd be tempted to say Spyderco has upped their game in terms of quality. This 15V Manix is centered, came sharp enough I've no need to sharpen it myself, beautiful stonewash, crisp markings, good even grind, everything I want, and nothing I don't. Good job on this one, Spydercrew!
And I'm extra happy to have a made-in-
knife in my pocket.
And I'm extra happy to have a made-in-
knife in my pocket.Re: CPM 15v Manix 2
Posted: Mon Jul 21, 2025 8:13 am
Bolster, I completely agree with you. These Manix 2 LW 15V knives arrived in perfect condition—blade perfectly centered, flawless edge—just outstanding overall. I'm really glad Spyderco listened to the feedback after all the complaints about the Para 3 15V. That one had too many issues, and I ended up returning mine.Bolster wrote: ↑Wed Jul 16, 2025 9:09 pmMine arrived today. Can't make a determination on a "sample of one," but if I could, I'd be tempted to say Spyderco has upped their game in terms of quality. This 15V Manix is centered, came sharp enough I've no need to sharpen it myself, beautiful stonewash, crisp markings, good even grind, everything I want, and nothing I don't. Good job on this one, Spydercrew!
And I'm extra happy to have a made-in-
Re: CPM 15v Manix 2
Posted: Mon Jul 21, 2025 11:19 am
I just received mine both are centered and razor sharp !!
Re: CPM 15v Manix 2
Posted: Mon Jul 21, 2025 4:29 pm
I am getting soooo tempted - but I just got in a Maxamet Manix and I not sure if I need another super steel Manix …. Arrgggg - Temptations!
Re: CPM 15v Manix 2
Posted: Tue Jul 22, 2025 1:38 am
SteveMidwest wrote: ↑Tue Jul 15, 2025 11:22 pmThanks for giving us the Box and Blade Date Codes jwbnyc !
I finally got a chance today to get out my 2016 CTS-XHP bladed C101PBN2 brown LW Manix 2. To compare the brown against the 15V brown LW. There is more difference than I remembered.
I have also recently purchased a New old Stock 2010 Stag Arms C101GPRBK2 Manix 2 from a Seller on eBay. He had two available, and I think he still has one of them available?
Bravo on yer OG Stag Manix2 - I think you're the second person I've ever seen post pics that also has the Stag Arms model, I love the color but man the texture of that G10 is uniquely rough I must say. It's great if you have gloves on.
Cheers,
John
Re: CPM 15v Manix 2
Posted: Tue Jul 22, 2025 7:45 pm
JMM wrote: ↑Tue Jul 22, 2025 1:38 amSteveMidwest wrote: ↑Tue Jul 15, 2025 11:22 pmThanks for giving us the Box and Blade Date Codes jwbnyc !
I finally got a chance today to get out my 2016 CTS-XHP bladed C101PBN2 brown LW Manix 2. To compare the brown against the 15V brown LW. There is more difference than I remembered.
I have also recently purchased a New old Stock 2010 Stag Arms C101GPRBK2 Manix 2 from a Seller on eBay. He had two available, and I think he still has one of them available?
Bravo on yer OG Stag Manix2 - I think you're the second person I've ever seen post pics that also has the Stag Arms model, I love the color but man the texture of that G10 is uniquely rough I must say. It's great if you have gloves on.
Cheers,
John
Re: CPM 15v Manix 2
Posted: Tue Jul 22, 2025 9:56 pm
I saw KnivesPlus had a modified 15V LW Manix 2 in stock with their exlusive "midnight blue" AWT scales, and I had to grab one. Looking forward to giving 15V a shot finally.
Re: CPM 15v Manix 2
Posted: Wed Jul 23, 2025 12:42 am
I don't have the LW, but I do have 2 of the original ones(got them at near original prices, one to use, one as a backup just in case something happens to the first), they're absolutely amazing knives. The Manix platform I've come to really enjoy, the heat treatment is amazing, hopefully I can spare the funds to get a LW to also have. At 30 degrees inclusive, they cut and cut like a laser forever. This entire job Spyderco and Shawn did on this collab is amazing. I love mine.
Re: CPM 15v Manix 2
Posted: Thu Jul 24, 2025 6:04 pm
It arrived today, and man it is a looker for sure. So glad they went with stonewash instead of satin; maybe that's just a necessity with 15V, but I much prefer stonewashed finish to any kind of satin. Action and lockup are flawless, and the factory edge is actually kind of insane by even by Spyderco standards. Looking forward to seeing how the 15V holds up.
Re: CPM 15v Manix 2
Posted: Fri Jul 25, 2025 9:24 am
I noticed these at Knives Plus, and debated grabbing one, but didn't know if I would like the midnight blue color, but it looks great! AWT is completely out of stock on Manix 2 LW anodized scales. It appears everyone made a mad dash.Wallach wrote: ↑Thu Jul 24, 2025 6:04 pm
It arrived today, and man it is a looker for sure. So glad they went with stonewash instead of satin; maybe that's just a necessity with 15V, but I much prefer stonewashed finish to any kind of satin. Action and lockup are flawless, and the factory edge is actually kind of insane by even by Spyderco standards. Looking forward to seeing how the 15V holds up.
Re: CPM 15v Manix 2
Posted: Sat Jul 26, 2025 10:31 am
Yep. Seems like 'the thing' is to grab one of these LWs and then some AWTs for it. Can't disagree though, sounds like an awesome plan.MOPs_Overlord wrote: ↑Fri Jul 25, 2025 9:24 amI noticed these at Knives Plus, and debated grabbing one, but didn't know if I would like the midnight blue color, but it looks great! AWT is completely out of stock on Manix 2 LW anodized scales. It appears everyone made a mad dash.Wallach wrote: ↑Thu Jul 24, 2025 6:04 pm
It arrived today, and man it is a looker for sure. So glad they went with stonewash instead of satin; maybe that's just a necessity with 15V, but I much prefer stonewashed finish to any kind of satin. Action and lockup are flawless, and the factory edge is actually kind of insane by even by Spyderco standards. Looking forward to seeing how the 15V holds up.
The latest ones of these I've held have been remarkable consistent. Zero to slight centeredness issues (and easily correctable) , very smooth and snappy, minimal lock stick that has been clearing up, and every single one I've gotten my hands on (about 7-8 total) have felt this way, with very minimal deviations.
Re: CPM 15v Manix 2
Posted: Sat Jul 26, 2025 5:43 pm
This one seems slightly off-center towards the clip side and I couldn't seem to get it any more centered with a fair bit of fiddling, but it's only a slight nudge and everything else about the knife is flawless. I've had bad luck with Manix 2 LWs having moderate to severe lock stick, but this is the best example of Manix 2 action I've come across, and the lock out is maybe the best I've ever felt on a folder. Imperfect centering is the kind of thing I can deal with compared to issues I've had on this model in the past.
One thing this knife has made me certain of is that I really wish Spyderco did more stonewash finishes. I'd choose it over satin every single time.
One thing this knife has made me certain of is that I really wish Spyderco did more stonewash finishes. I'd choose it over satin every single time.
Re: CPM 15v Manix 2
Posted: Sat Jul 26, 2025 10:15 pm
Mine also was not quite centered, but loosening all the screws and pushing the blade the other way and retightening seemed to do the trick. But I also have a Para 3 LW 15V that I carry all the time and it has horrible centering. Like you, I don't mind too much. The detent is far more important to me.Wallach wrote: ↑Sat Jul 26, 2025 5:43 pmThis one seems slightly off-center towards the clip side and I couldn't seem to get it any more centered with a fair bit of fiddling, but it's only a slight nudge and everything else about the knife is flawless. I've had bad luck with Manix 2 LWs having moderate to severe lock stick, but this is the best example of Manix 2 action I've come across, and the lock out is maybe the best I've ever felt on a folder. Imperfect centering is the kind of thing I can deal with compared to issues I've had on this model in the past.
One thing this knife has made me certain of is that I really wish Spyderco did more stonewash finishes. I'd choose it over satin every single time.
That is great to hear about the lock on yours. Mine had minor stick (I'd put it at a 2-3 on a scale of 1-10, and now it is down to about a .5-1 on that same scale. It actually has no stick if I lock it out super slow, or flick it super hard. I'm hoping it totally clears up, but I'm fine if it stays how it is. I'm sort of wondering if it is due to the finishing on the top inside of the locking block where the ball comes to rest.
And yeah, the finish on the blade is better than the Para3s and the BBB logo is super crisp. The Native 5s also have this crisp logo as well. I'd put this one in the running for 'best Spyderco release of the year', if there were such an unofficial thing.
Re: CPM 15v Manix 2
Posted: Sun Jul 27, 2025 11:13 am
Did I miss a memo somewhere? 
A Reddit user has just recently done a scale swap with his new LW Manix 2 15V, and found a black ceramic ball bearing inside.
I remember hearing about this becoming a possibility, before the Manix 2 Salt was going to be produced. I never heard that this was going to possibly be the default going forward?
I am going to open mine up soon, and look inside, but, I pre-ordered this LW 15V at two different Dealers, and ended up getting two of them (by accident). The one I have put to use already, has an assembly Date code of FY, and my now extra still unused LW 15V has a Code of AY. I really don't want to take the still new one apart, because I am going to sell it back off now. Do we think that opening up my now used FY and finding a black ceramic ball bearing inside, really tells us for sure that the AY's were also all this way?
Now to be clear, I am all for ceramic ball bearings, so that is not an issue with me. I just find it hard to believe that as close of attention as I pay to all of this, that somehow this slipped by me ahead of time.
Has Spyderco made any public statement about this?
A Reddit user has just recently done a scale swap with his new LW Manix 2 15V, and found a black ceramic ball bearing inside.
I remember hearing about this becoming a possibility, before the Manix 2 Salt was going to be produced. I never heard that this was going to possibly be the default going forward?
I am going to open mine up soon, and look inside, but, I pre-ordered this LW 15V at two different Dealers, and ended up getting two of them (by accident). The one I have put to use already, has an assembly Date code of FY, and my now extra still unused LW 15V has a Code of AY. I really don't want to take the still new one apart, because I am going to sell it back off now. Do we think that opening up my now used FY and finding a black ceramic ball bearing inside, really tells us for sure that the AY's were also all this way?
Now to be clear, I am all for ceramic ball bearings, so that is not an issue with me. I just find it hard to believe that as close of attention as I pay to all of this, that somehow this slipped by me ahead of time.
Has Spyderco made any public statement about this?
Re: CPM 15v Manix 2
Posted: Sun Jul 27, 2025 12:09 pm
SteveMidwest wrote: ↑Sun Jul 27, 2025 11:13 amDo we think that opening up my now used FY and finding a black ceramic ball bearing inside, really tells us for sure that the AY's were also all this way?
I just finished looking at all my Manix's from the outside. All the older ones have a steel-colored ball. The 15V looks black.
Manix 2 LW 15V
Manix 2 LW REX45
Re: CPM 15v Manix 2
Posted: Sun Jul 27, 2025 12:16 pm
I can't quite recall the source, but I do remember reading, or hearing that the Manix was updating rolling changes/CQI to include the ceramic ball for the lock. Might have initially been an off-hand comment posted by our own Michael Janich, or perhaps a mention at one of the shows from Eric himself. This was 2023 (earliest), or 2024 (most likely). Hard to pinpoint for certain, time has been moving blurrily fast these past 5 years, for me.SteveMidwest wrote: ↑Sun Jul 27, 2025 11:13 amDid I miss a memo somewhere?
A Reddit user has just recently done a scale swap with his new LW Manix 2 15V, and found a black ceramic ball bearing inside.
I remember hearing about this becoming a possibility, before the Manix 2 Salt was going to be produced. I never heard that this was going to possibly be the default going forward?
I am going to open mine up soon, and look inside, but, I pre-ordered this LW 15V at two different Dealers, and ended up getting two of them (by accident). The one I have put to use already, has an assembly Date code of FY, and my now extra still unused LW 15V has a Code of AY. I really don't want to take the still new one apart, because I am going to sell it back off now. Do we think that opening up my now used FY and finding a black ceramic ball bearing inside, really tells us for sure that the AY's were also all this way?
Now to be clear, I am all for ceramic ball bearings, so that is not an issue with me. I just find it hard to believe that as close of attention as I pay to all of this, that somehow this slipped by me ahead of time.
Has Spyderco made any public statement about this?
Re: CPM 15v Manix 2
Posted: Sun Jul 27, 2025 1:35 pm
I had a hard time telling just by peeking in, RustyIron, because the ball is so reflective. Then I grabbed the brown 2016 CTS-XHP LW, and looked in at them while side by side, and sure enough, the LW 15V ball bearing is darker.RustyIron wrote: ↑Sun Jul 27, 2025 12:09 pmSteveMidwest wrote: ↑Sun Jul 27, 2025 11:13 amDo we think that opening up my now used FY and finding a black ceramic ball bearing inside, really tells us for sure that the AY's were also all this way?
I just finished looking at all my Manix's from the outside. All the older ones have a steel-colored ball. The 15V looks black.
Manix 2 LW 15V
IMG_5707 Large.jpeg
Manix 2 LW REX45
IMG_5710 Large.jpeg
