Manix Christmas 2 You…GIVEAWAY!!

Discuss Spyderco's products and history.
Post Reply
User avatar
ladybug93
Member
Posts: 8358
Joined: Tue May 15, 2018 11:20 pm

Re: Manix Christmas 2 You…GIVEAWAY!!

#141

Post by ladybug93 »

Ramonade wrote: ↑
Wed Dec 14, 2022 6:53 am
 Didn't think about the fact a G10 Manix can be customized !
I wonder if the ceramic ball brings a difference that can be felt in use.

Someone in this thread will know for sure ! :open-grin
i don't feel a difference in mine.
keep your knife sharp and your focus sharper.
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
Top
akapennypincher
Member
Posts: 663
Joined: Sun Jun 28, 2009 8:07 am

Re: Manix Christmas 2 You…GIVEAWAY!!

#142

Post by akapennypincher »

What is special about ceramic ball bearings?
Top
User avatar
ladybug93
Member
Posts: 8358
Joined: Tue May 15, 2018 11:20 pm

Re: Manix Christmas 2 You…GIVEAWAY!!

#143

Post by ladybug93 »

it makes you feel cooler. seriously though, it's possible that they wear longer, but that's certainly not a need for the manix. it's a perfectly good design as is and people just like to make them their own.
keep your knife sharp and your focus sharper.
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
Top
User avatar
Dazen
Member
Posts: 1391
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Manix Christmas 2 You…GIVEAWAY!!

#144

Post by Dazen »

akapennypincher wrote: ↑
Wed Dec 14, 2022 10:18 am
 What is special about ceramic ball bearings?
Yes they say that ceramic doesn’t wear, and also said to have less friction with less lubricants. I change mine out when I put the Ti ball cage in. Maybe it’s just in my head but my other Manix is as smooth as it gets!

Why did Spyderco only use the Ceramic Ball in the CF Dodo?
Dane

“Stop buying your kids what you never had and start teaching them what you never knew!”
Top
akapennypincher
Member
Posts: 663
Joined: Sun Jun 28, 2009 8:07 am

Re: Manix Christmas 2 You…GIVEAWAY!!

#145

Post by akapennypincher »

Dazen wrote: ↑
Wed Dec 14, 2022 5:18 pm
akapennypincher wrote: ↑
Wed Dec 14, 2022 10:18 am
 What is special about ceramic ball bearings?
Yes they say that ceramic doesn’t wear, and also said to have less friction with less lubricants. I change mine out when I put the Ti ball cage in. Maybe it’s just in my head but my other Manix is as smooth as it gets!

Why did Spyderco only use the Ceramic Ball in the CF Dodo?

Sound like tweeting that could accomplish good results. Bearing Cost❓
Top
Bradley
Member
Posts: 906
Joined: Tue Jun 28, 2011 1:59 am

Re: Manix Christmas 2 You…GIVEAWAY!!

#146

Post by Bradley »

How generous! I’ll do 081

Merry Christmas!
Top
User avatar
steelcity16
Member
Posts: 5379
Joined: Mon Dec 11, 2017 10:34 am

Re: Manix Christmas 2 You…GIVEAWAY!!

#147

Post by steelcity16 »

016! Just made it!
:bug-white-red CRU-CARTA THE SEKI MODELS! :bug-white-red AND BRING US THE DODO-FLY! :bug-white-red
Top
User avatar
Dazen
Member
Posts: 1391
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Manix Christmas 2 You…GIVEAWAY!!

#148

Post by Dazen »

Well y’all, that’s a wrap and numbers are locked in!

I’ll announce the winner tomorrow one page one!

Thanks

Dane
Dane

“Stop buying your kids what you never had and start teaching them what you never knew!”
Top
User avatar
ChrisinHove
Member
Posts: 4307
Joined: Tue Dec 17, 2013 7:12 am
Location: 27.2046° N, 77.4977° E

Re: Manix Christmas 2 You…GIVEAWAY!!

#149

Post by ChrisinHove »

Dazen wrote: ↑
Wed Dec 14, 2022 5:18 pm
akapennypincher wrote: ↑
Wed Dec 14, 2022 10:18 am
 What is special about ceramic ball bearings?
Yes they say that ceramic doesn’t wear, and also said to have less friction with less lubricants. I change mine out when I put the Ti ball cage in. Maybe it’s just in my head but my other Manix is as smooth as it gets!

Why did Spyderco only use the Ceramic Ball in the CF Dodo?
I put ceramics in my Domino, along with a thicker thrust washer. Huge improvement over what was left of the originals…
Top
User avatar
Ramonade
Member
Posts: 3394
Joined: Sun Aug 15, 2021 3:45 pm
Location: NE France

Re: Manix Christmas 2 You…GIVEAWAY!!

#150

Post by Ramonade »

Good luck to everyone ! and big thanks for Dazen for organizing such an event on the forum ;)
:respect In the collection :respect : Lots of different steels, in lots of different (and same) Spydercos.

Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s :face-clouds
Top
dullmaker
Member
Posts: 212
Joined: Thu May 31, 2018 12:28 pm

Re: Manix Christmas 2 You…GIVEAWAY!!

#151

Post by dullmaker »

Thanks again for the giveaway!
Top
User avatar
Dazen
Member
Posts: 1391
Joined: Thu Jun 20, 2019 6:38 am
Location: Texas U.S.A. Earth

Re: Manix Christmas 2 You…GIVEAWAY!!

#152

Post by Dazen »

dsvirsky wrote: ↑
Sat Dec 10, 2022 1:26 pm
 819. Thanks for the giveaway!

:bug-red

CONGRATS Dsvirsky!!!

P.M. me your address and I’ll send it your way!
Dane

“Stop buying your kids what you never had and start teaching them what you never knew!”
Top
User avatar
Manixguy@1994
Member
Posts: 17249
Joined: Fri Jun 10, 2016 12:12 pm
Location: Central Illinois
Contact:
Contact Manixguy@1994

Re: Manix Christmas 2 You…GIVEAWAY!!

#153

Post by Manixguy@1994 »

Thanks Dazen for the opportunity ! MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Top
User avatar
WilliamMunny
Member
Posts: 1952
Joined: Fri Jan 29, 2021 12:20 pm

Re: Manix Christmas 2 You…GIVEAWAY!!

#154

Post by WilliamMunny »

Congratulations dsvirsky! Thanks again for the giveaway, these are always fun.
Endura AUS-8, Manix 2 S30V, Manix 2 LW MagnaCut, BBB 15V Manix 2, BBB 15V Para 3 LW, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, REC Para 3 10V Satin, Dragonfly Salt 2, GB2 M4, Pacific Salt SE H2, Dragon Fly SE H2, Endela K390 PE, Chaparral SE XHP, Shaman Micarta XHP, Bodacious SPY27, Manix 2 LW 15v, Sage 5 REX-121 LW.
Top
User avatar
Ramonade
Member
Posts: 3394
Joined: Sun Aug 15, 2021 3:45 pm
Location: NE France

Re: Manix Christmas 2 You…GIVEAWAY!!

#155

Post by Ramonade »

For once I was pretty close !
Congrats to the winner, hope you'll deeply enjoy this special Manix made even more special by the way it was obtained :open-grin
:respect In the collection :respect : Lots of different steels, in lots of different (and same) Spydercos.

Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s :face-clouds
Top
User avatar
ladybug93
Member
Posts: 8358
Joined: Tue May 15, 2018 11:20 pm

Re: Manix Christmas 2 You…GIVEAWAY!!

#156

Post by ladybug93 »

thanks again dazen! congrats dsvirsky!
keep your knife sharp and your focus sharper.
current collection:
C191GP, C36GMCBK2, C11ZFRDBBK, C267BK, C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
M398, H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
Top
User avatar
Cl1ff
Member
Posts: 1129
Joined: Fri Sep 13, 2019 4:35 pm
Location: Florida

Re: Manix Christmas 2 You…GIVEAWAY!!

#157

Post by Cl1ff »

Congrats!
And thank you, Dazen!
I managed to score one, but forgot to remove my number in time lol
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool:
Top
User avatar
Naperville
Member
Posts: 5899
Joined: Sun Feb 04, 2018 1:58 am
Location: Illinois, USA

Re: Manix Christmas 2 You…GIVEAWAY!!

#158

Post by Naperville »

Congratulations dsvirsky!
I Support: VFW; USO; Navy SEAL Foundation, SEAL Jason Redman; America’s Warrior Partnership; Second Amendment Foundation(SAF); Gun Owners of America(GOA); Firearms Policy Coalition(FPC); Knife Rights; The Dog Aging Institute; Longevity Biotech Fellowship;
Top
User avatar
KP
Member
Posts: 420
Joined: Fri Sep 24, 2004 10:33 am

Re: Manix Christmas 2 You…GIVEAWAY!!

#159

Post by KP »

Congratulations dsvirsky!

And thank you Dazen.
Top
User avatar
JSumm
Member
Posts: 6541
Joined: Tue Jan 05, 2021 6:59 pm
Location: North of Atlanta, GA USA

Re: Manix Christmas 2 You…GIVEAWAY!!

#160

Post by JSumm »

Congrats Dsvirsky! And thanks for the Giveaway Dazen!
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
Top
Post Reply

Return to “Spyderco General Discussion”