Re: What did you use your Spyderco for last?
Posted: Mon Apr 06, 2020 8:13 pm
Used mah FRN Chaparral to open a box from MXG Gear... :)
Spyderco Forums
What did you use your Spyderco for last?
Page 69 of 186
Re: What did you use your Spyderco for last?
Posted: Mon Apr 06, 2020 9:56 pm
Finished slicing a poorly-sliced pizza with the SE wharncliffe Endura :)
Re: What did you use your Spyderco for last?
Posted: Tue Apr 07, 2020 2:45 pm
Typical daily cutting tasks, with the exception of helping the skeleton maintenance crew cut up some rubber to use as vibration absorbers for a couple motor bases.
Re: What did you use your Spyderco for last?
Posted: Tue Apr 07, 2020 3:04 pm
Re: What did you use your Spyderco for last?
Posted: Tue Apr 07, 2020 3:31 pm
Did some light wood carving with the Zoomer!
Found a small old rake head in the woods behind my house, so I decided to revive it for my niece so she can “help” with yard work. :) I took the handle from an old broken kids snow shovel and used the Zoomer to thin the taper a little bit so it will fit completely on the rake head. The ergonomics on this knife are absolutely phenomenal! :spyder:
Found a small old rake head in the woods behind my house, so I decided to revive it for my niece so she can “help” with yard work. :) I took the handle from an old broken kids snow shovel and used the Zoomer to thin the taper a little bit so it will fit completely on the rake head. The ergonomics on this knife are absolutely phenomenal! :spyder:
Re: What did you use your Spyderco for last?
Posted: Tue Apr 07, 2020 4:02 pm
So nice to see a Zoomer in the wild!
Re: What did you use your Spyderco for last?
Posted: Tue Apr 07, 2020 4:08 pm
Hahaha!! Bloke, did you put cameras in my house again???
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 12:03 am
Made a grocery run today, the store was running low on bags (I guess they're made in China, go figure) so they asked if I minded them packing my stuff into cardboard boxes instead. "Do I Mind? Do I Mind!?" Little did they know, I had a new Spyderco Para 3 LW in my pocket and I couldn't wait to reduce this mess down into the recycling bin. B-)
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 9:02 am
Praise the boxes, without them we would all just be waving our knives around in the air!kennethsime wrote: ↑Wed Apr 08, 2020 12:03 amMade a grocery run today, the store was running low on bags (I guess they're made in China, go figure) so they asked if I minded them packing my stuff into cardboard boxes instead. "Do I Mind? Do I Mind!?" Little did they know, I had a new Spyderco Para 3 LW in my pocket and I couldn't wait to reduce this mess down into the recycling bin. B-)
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 3:42 pm
Last time I picked up one of my many Spyderco knives, it was an FRN Endura, and the clip had come slightly loose in my pocket. I'm very detailed and meticulous with precision things like torx 6 screws, but a small turn on a screw, and it stripped.
So, I tried swapping scales from an another endura model I had, only to find out just how fussy these particular models are. When disassembled,but hey, scales are not sold anymore....
No luck, and I'm not wasting time sending them back for work. They're going in the garbage during this covid19 scare, with the rest of my spring cleaning
Rest of my Spyderco knives are probably going up for sale, and they're all shelved.
Been a collector since 97, but no more.
Disappointed in the quality of the Seki models, and Golden models are just too expensive.
So, I tried swapping scales from an another endura model I had, only to find out just how fussy these particular models are. When disassembled,but hey, scales are not sold anymore....
No luck, and I'm not wasting time sending them back for work. They're going in the garbage during this covid19 scare, with the rest of my spring cleaning
Rest of my Spyderco knives are probably going up for sale, and they're all shelved.
Been a collector since 97, but no more.
Disappointed in the quality of the Seki models, and Golden models are just too expensive.
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 5:11 pm
Hawkbill Ladybug opened my new Bluetooth earbuds :)
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 6:04 pm
Well that is sad to hear! Were these older enduras? I've swapped blades btw at least four of my delica 4s and never had an issue, although I have found I needed to swap both the blade and lockbar together.D-Roc wrote: ↑Wed Apr 08, 2020 3:42 pmLast time I picked up one of my many Spyderco knives, it was an FRN Endura, and the clip had come slightly loose in my pocket. I'm very detailed and meticulous with precision things like torx 6 screws, but a small turn on a screw, and it stripped.
So, I tried swapping scales from an another endura model I had, only to find out just how fussy these particular models are. When disassembled,but hey, scales are not sold anymore....
No luck, and I'm not wasting time sending them back for work. They're going in the garbage during this covid19 scare, with the rest of my spring cleaning
Rest of my Spyderco knives are probably going up for sale, and they're all shelved.
Been a collector since 97, but no more.
Disappointed in the quality of the Seki models, and Golden models are just too expensive.
Edit to add: there are definitely some tricks to reassembling the seki backlocks - youtube helped me greatly.
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 6:16 pm
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 6:28 pm
I was going to remark that that looked like a cigarette your ear....
Then I zoomed in.
Then I zoomed in.
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 8:03 pm
Bloking around and getting an early jump on recycling for the week...
Re: What did you use your Spyderco for last?
Posted: Wed Apr 08, 2020 9:43 pm
Ha! I've been Bloked twice in the past couple days. Feels good :cool:
Turbo, that's quite a bit of cardboard!
Turbo, that's quite a bit of cardboard!
Re: What did you use your Spyderco for last?
Posted: Thu Apr 09, 2020 11:49 am
Trying to teach my kids how to build a fire, so I've been using my Shaman for shavings and what not.
Re: What did you use your Spyderco for last?
Posted: Thu Apr 09, 2020 12:35 pm
I used two of them for an experiment!
I had put a RGT clip on my P.I.T.S. because I despise wire clips marking up my titanium handles. Also for that reason, I haven’t enjoyed my Mantra 2 yet. So, I moved the RGT clip from the P.I.T.S. to the Mantra 2:
And how delightful a change it is!!
I had put a RGT clip on my P.I.T.S. because I despise wire clips marking up my titanium handles. Also for that reason, I haven’t enjoyed my Mantra 2 yet. So, I moved the RGT clip from the P.I.T.S. to the Mantra 2:
And how delightful a change it is!!
Re: What did you use your Spyderco for last?
Posted: Thu Apr 09, 2020 3:08 pm
Cardboard cutting with my Delica
Re: What did you use your Spyderco for last?
Posted: Thu Apr 09, 2020 5:07 pm
Used my new Native LW to unbox a new freezer
