Knife Works Para2 up for preorder

Discuss Spyderco's products and history.
Prospero
Member
Posts: 173
Joined: Mon Feb 06, 2012 8:49 am

#101

Post by Prospero »

-F1 wrote:I can't remember what steel the Turd PM2 has, but I don't think there is a much better steel than M390/CTS-204P, unless you enter price into the discussion.
The brown PM2 will have S35VN blade steel.
User avatar
jabba359
Member
Posts: 4963
Joined: Fri Feb 10, 2006 10:07 pm
Location: Van Nuys, CA U.S.A. Earth
Contact:

#102

Post by jabba359 »

sir_mike wrote:Which one came with the M390? Is that the blue one? Sorry if it seems like a dumb question but I am new to the Para 2's and just working on getting a few different colored ones.

Does anyone know where a list of run dates/amounts are at for these sprint run models of the Para 2's?
You may find some answers here: http://www.spydiewiki.com/index.php?tit ... Variations
-Kyle

:bug-red
Latest arrivals: Lava Flow CF DLC Para2, Magnacut Mule, GITD Jester

http://www.spydiewiki.com
Prospero
Member
Posts: 173
Joined: Mon Feb 06, 2012 8:49 am

#103

Post by Prospero »

sir_mike wrote:Hi all,

I did want an orange and blue ones but I missed the boat with those! :(
sir_mike, I don't know if there was a discount available for pre-ordering a Blue PM2 from Bento Box Shop but they are still listed as available/in stock for $179.95.
jronan2
Member
Posts: 7
Joined: Tue Feb 14, 2012 11:17 pm

#104

Post by jronan2 »

I ordered one the other night. This seems like a decent price for a sprint run correct? How much better is this steel compared to s30v? The best steel I have so far in spydie's is s30v.


PS. It really sucks that I can't get the blue M390 from bento since they don't ship to NY.
User avatar
Jet B
Member
Posts: 325
Joined: Wed Sep 22, 2010 9:14 am
Location: Western Canada

#105

Post by Jet B »

jronan2 wrote:I ordered one the other night. This seems like a decent price for a sprint run correct? How much better is this steel compared to s30v? The best steel I have so far in spydie's is s30v.


PS. It really sucks that I can't get the blue M390 from bento since they don't ship to NY.
I can't reply from experience because I don't have my m390 Military yet but Ankerson has done lots of tests and ranks M390 right at the top. S30V, while still an excellent high end steel. 390 is just steel snob quality material.
sir_mike
Member
Posts: 611
Joined: Tue Feb 14, 2012 1:31 pm
Location: Michigan

#106

Post by sir_mike »

Prospero wrote:sir_mike, I don't know if there was a discount available for pre-ordering a Blue PM2 from Bento Box Shop but they are still listed as available/in stock for $179.95.
Thanks for the info, I will check them out. I hope it is less than that!
sir_mike
Member
Posts: 611
Joined: Tue Feb 14, 2012 1:31 pm
Location: Michigan

#107

Post by sir_mike »

jabba359 wrote:You may find some answers here: http://www.spydiewiki.com/index.php?tit ... Variations
Thanks for the link.. It will help!
User avatar
JNewell
Member
Posts: 5075
Joined: Fri Sep 24, 2004 10:33 am
Location: Land of the Bean and the Cod

#108

Post by JNewell »

Guessing - M390 is imported, the CTS steels are domestic - there might be a big difference. Or not, don't know.
-F1 wrote:I posted something to the effect that this knife shows how overpriced BBS was, but then I realized that I have no idea what the production costs of M390 vs. CTS-204P are, so I thought better of it. In any case, I've decided to pass on this one. (NTAC)
User avatar
JNewell
Member
Posts: 5075
Joined: Fri Sep 24, 2004 10:33 am
Location: Land of the Bean and the Cod

#109

Post by JNewell »

jronan2 wrote:I ordered one the other night. This seems like a decent price for a sprint run correct? How much better is this steel compared to s30v? The best steel I have so far in spydie's is s30v.


PS. It really sucks that I can't get the blue M390 from bento since they don't ship to NY.
Very few knife dealers are shipping folders to NY right now. KnifeWorks seems to be shipping to NY, but that's unusual. eBay sellers probably don't know or don't care.
User avatar
Donut
Member
Posts: 9613
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#110

Post by Donut »

JNewell wrote:Guessing - M390 is imported, the CTS steels are domestic - there might be a big difference. Or not, don't know.
I was going to mention this in my reply. Also, I remember a while back when Sal mentioned some quirks of the current steel industry and how some steel manufacturers are giving very good deals on new steels at the hopes of gaining some exposure. Spyderco is really helping everyone out by putting these new steels into knives.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
luckie8
Member
Posts: 1
Joined: Wed Feb 01, 2012 10:04 pm

#111

Post by luckie8 »

pre-ordering mine now..
User avatar
jabba359
Member
Posts: 4963
Joined: Fri Feb 10, 2006 10:07 pm
Location: Van Nuys, CA U.S.A. Earth
Contact:

#112

Post by jabba359 »

I had planned on not ordering any of these because I already have the blue M390 sprint. Then this thread convinced me that I needed to get one of the green ones anyway. I went over to the Knife Works site and somehow ended up ordering two. Thanks a lot guys. From zero to one to two. You are all such enablers! :p
-Kyle

:bug-red
Latest arrivals: Lava Flow CF DLC Para2, Magnacut Mule, GITD Jester

http://www.spydiewiki.com
rodloos
Member
Posts: 1625
Joined: Sun Sep 06, 2009 9:22 pm
Location: DFW, TX

#113

Post by rodloos »

chuck_roxas45 wrote:Hehehe :p
JNewell wrote:You mean I could do that? Get around the 2/customer limit, then scalp them on eBay for twice my money or more? That sounds like such a great idea!
You can thank me now.
Only good reason I can think of for letting someone order more than 2, is for someone like Donut to order a couple for a forum member living outside the USA who couldn't get their order to go though (like chuck) if he also wants to order a couple for himself. I assume y'all worked out how to handle that, if that is the case :) .
Which Knife, A or B? get Both! (and C, D and E) :)
Bill1170
Member
Posts: 2969
Joined: Tue Oct 20, 2009 7:34 pm
Location: San Diego North County

#114

Post by Bill1170 »

Prospero wrote:sir_mike, I don't know if there was a discount available for pre-ordering a Blue PM2 from Bento Box Shop but they are still listed as available/in stock for $179.95.
The smurf blue Para 2's were $179.95 from the very start of the preorders last year. The higher price is the main reason that there are still some left for sale at Bento Box. It will be interesting to compare the similar Bohler and Carpenter steels to tease out any differences between them.
jronan2
Member
Posts: 7
Joined: Tue Feb 14, 2012 11:17 pm

#115

Post by jronan2 »

JNewell wrote:Very few knife dealers are shipping folders to NY right now. KnifeWorks seems to be shipping to NY, but that's unusual. eBay sellers probably don't know or don't care.
I am noticing this, but I have bought my spydies from a number of different places, and bought a bunch from amazon, with no issues. Kind of weird I can buy from a huge corporation like amazon but not somewhere like Bento.
User avatar
Blerv
Member
Posts: 11850
Joined: Mon May 04, 2009 11:24 am

#116

Post by Blerv »

Amazon in many ways is just a classy version of eBay rather than a "huge corporation". Also, typicially large corporations offer things small shops can't. It's the direct result of having more people in their legal dept than Bento prob has in their entire company.

Regardless certain knives won't be available in your normal venues. The blue Para2 is an direct exclusive which means BB or a collector club knife in the few dealers who get them.
Spook410
Member
Posts: 205
Joined: Tue Sep 20, 2011 9:34 am
Location: New Mexico

#117

Post by Spook410 »

Let's see.. brown millie in CTS XHP, CF millie in M390, 2 green para's in CTS 204. That's $560 in pocketknives plus shipping so far this year. And it's only February. When are they going to stop offering stuff that's so hard to say 'no' to?
sir_mike
Member
Posts: 611
Joined: Tue Feb 14, 2012 1:31 pm
Location: Michigan

#118

Post by sir_mike »

Spook410 wrote:Let's see.. brown millie in CTS XHP, CF millie in M390, 2 green para's in CTS 204. That's $560 in pocketknives plus shipping so far this year. And it's only February. When are they going to stop offering stuff that's so hard to say 'no' to?
How come you dont have the brown millie in S35NV in that collection? or the Blue M390??

Is it possible to get the XHP still?
User avatar
JNewell
Member
Posts: 5075
Joined: Fri Sep 24, 2004 10:33 am
Location: Land of the Bean and the Cod

#119

Post by JNewell »

sir_mike wrote:How come you dont have the brown millie in S35NV in that collection?
Doesn't exist, that's the not-yet-available Para2.
sir_mike wrote:Is it possible to get the XHP still?
Assuming you mean the Military, yes, if you shop around, though it is discontinued and a little hard to find at rational prices.
sir_mike
Member
Posts: 611
Joined: Tue Feb 14, 2012 1:31 pm
Location: Michigan

#120

Post by sir_mike »

JNewell wrote:Doesn't exist, that's the not-yet-available Para2.



Assuming you mean the Military, yes, if you shop around, though it is discontinued and a little hard to find at rational prices.
I found a link for the s35nv brown one. Is this a good price (ie worth the money)?

http://www.finalknifestop.com/product/C81GPBN2
Post Reply