I'll see your Spyderco and raise you another!
Re: I'll see your Spyderco and raise you another!
There are also the back boxes where the lid comes off such as for the Kiwi3 stag handle models. It may be with others, but that is the only why I have seen it come with.
Re: I'll see your Spyderco and raise you another!
GSO's List
There will be mistakes, so when you find them, just chuck me an PM and I will fix them.
Total = 819
Couldn’t do this list without Spydiewiki.
The guys have done a great job there.
There will be mistakes, so when you find them, just chuck me an PM and I will fix them.
Total = 819
Couldn’t do this list without Spydiewiki.
The guys have done a great job there.
Last edited by IG-88 on Tue Sep 16, 2014 1:07 pm, edited 17 times in total.
- GoldenSpydie
- Member
- Posts: 2136
- Joined: Thu Apr 10, 2014 8:56 am
- Location: CO and WY
Re: I'll see your Spyderco and raise you another!
Maybe I should have been more clear. This is what I meant by "Spyder hole cut outs."Reject wrote:Great job on the list GI-88, Well done mate.
I like the plan for the non SKU plays.
One question though.
If this suggestion is taken on, what would the photo be of?
If it was a photo of the knife, then the Spyder hole is just a missing piece of steelGoldenSpydie wrote:I vote for everything--I have a lot of that stuff myself. How about different sizes of Spyder hole cut outs? Or would that only count as one item?
It’s a missing part and how you take a photo of something that is missing, not there?
Then again; a Spydie hole is not the part that is missing; it is the place where the part is missing from!
You could take a photo of the Spyder hole without the knife; but what would the photo be of.
But a hole a have must have edges; I mean if a hole didn’t have edges you would never know how big they were and we would all be engulfed.
So if a hole has an edge; is the edge part of the hole or part of the knife?
If the photo is of the hole, should it be taken of it with or without the edge?
And.. and..if it is without the edge… … No sorry this is all to much to confusing for me.
No photos of holes please.
BTW, please don't forget to add the balance ball game from my previous post. Thanks!
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: I'll see your Spyderco and raise you another!
*Landon*sal wrote: .... even today, we design a knife from the edge out!
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: I'll see your Spyderco and raise you another!
*Landon*sal wrote: .... even today, we design a knife from the edge out!
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: I'll see your Spyderco and raise you another!
*Landon*sal wrote: .... even today, we design a knife from the edge out!
- rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 8:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
Re: I'll see your Spyderco and raise you another!
Crap.
I'm early, going to find the time zone settings.
Does 23 1/2 hours count?
One of 23 MT01 factory stonewashed mules. Stonewashed was indicated by the white spot sticker on the box. This was from the good ol' days when you could walk in SFO and pick and choose from a whole box of mules. I opted for one stonewashed and one CC.
From spydiewiki.com-"Either one of the MT01P factory stonewashed or the MT01P with Collectors club markings is believed to be the most collectible."
Ian
I'm early, going to find the time zone settings.
Does 23 1/2 hours count?
One of 23 MT01 factory stonewashed mules. Stonewashed was indicated by the white spot sticker on the box. This was from the good ol' days when you could walk in SFO and pick and choose from a whole box of mules. I opted for one stonewashed and one CC.
From spydiewiki.com-"Either one of the MT01P factory stonewashed or the MT01P with Collectors club markings is believed to be the most collectible."
Ian
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: I'll see your Spyderco and raise you another!
24 Hour Rule....
I jumped the gun by a few minutes... but no challenge was made so play on with the non SKU. I think by my last count I have officially 2 SKU items left to play.
I jumped the gun by a few minutes... but no challenge was made so play on with the non SKU. I think by my last count I have officially 2 SKU items left to play.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
- rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 8:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
Re: I'll see your Spyderco and raise you another!
I was just putting together a photo, but i was early last night so who am i to say anything about you being early tonight? I keep finding things around the house with sku's, so i might have a couple more.
Ian
Ian
-
- Member
- Posts: 10
- Joined: Wed Sep 10, 2014 5:53 am
- rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 8:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
Re: I'll see your Spyderco and raise you another!
Nope that's not the one I was going to play, I already played that photo way back on page 80. But keep digging through my photo bucket files, you should be able to tell what hasn't been played yet.jennecarter wrote:
R7
- rescueseven
- Member
- Posts: 448
- Joined: Thu Dec 30, 2004 8:45 am
- Location: 23.48° @ 67,275.59 meters from Spyderco
Re: I'll see your Spyderco and raise you another!
I've been thinking, and what would you guys say about using a Catalog as an item to raise? I know some of you guys out there have every catalog Spyderco has released and I think it'd be a nice non-SKU item to be able to raise!