Resilience w/Punisher Half Skull Inlay... WIP

A place for you to post your pictures of Spyderco knives. Read Announcement before posting!
Post Reply
BOOMER52
Member
Posts: 289
Joined: Sun Jan 27, 2013 9:22 am
Location: Crooked River Ranch, OR
Contact:
Contact BOOMER52

Resilience w/Punisher Half Skull Inlay... WIP

#1

Post by BOOMER52 »

I finally got around to mapping the Punisher half skull onto my Resilience. I've done a good many of these inlay scales but for a different model of knife. This is the first set for the Resilience.

So first we have the CAD Preview rendering. Proposed colors will be black G10 w/red G10 half skull inlays... on both the presentation and clip sides. Predator Plate texturing...
Image

The next two pics are after I've machined the pockets to receive the red G10 Punisher half skulls and have epoxied them in place.
Image
Image

I then perform the remainder of the machining operations consisting of holes, hole pockets, edge beveling, texturing, and profiling.
Image
Image
Image

This last pic is after removal from the tabs in the coupon and following a soap and water scrub to remove machining chalk. They're still wet in the pic...
Image
Top
User avatar
xceptnl
Member
Posts: 9000
Joined: Mon Feb 21, 2011 6:48 pm
Location: Tobacco Country, Virginia
Contact:
Contact xceptnl

#2

Post by xceptnl »

Terrific looking (as always). I love seeing the process almost as much as the finished product.
Image
sal wrote: .... even today, we design a knife from the edge out!
*Landon*
Top
User avatar
Officer Gigglez
Member
Posts: 801
Joined: Wed Nov 13, 2013 4:22 pm
Location: Originally out of Arizona, currently live in Missouri.

#3

Post by Officer Gigglez »

I need new undies.
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
Top
User avatar
Monocrom
Member
Posts: 1331
Joined: Thu Apr 06, 2006 1:01 am
Location: NYC

#4

Post by Monocrom »

Those are sweet scales!
"The World is insane, with small pockets of sanity here & there. Not the other way around."

:spyder:-John Cleese- :spyder:
Top
User avatar
Ned
Member
Posts: 555
Joined: Sat Mar 30, 2013 9:39 pm
Location: the beautiful state of Wyoming.

#5

Post by Ned »

Just wow! Awesome job man...
:spyder: C101PBL2, C54GPBN, C154PBK, MGREP, JGGYP, C75P3, C36TIP, C113GPGY, C127GPOR, C85GPBL, C11SBK, C10SBK, C11TR, C10TR, C28S (Wharncliffe mod), C11TIPD, C12GS, FB15P, C110GPBL, C85GP2, C141CFP, FB14P3Z, C123GPBL, C88PYL, KO4PBK, C105BMP

"For we wrestle not against flesh and blood, but against principalities, against powers, against the rulers of the darkness of this world, against spiritual wickedness in high places...Wherefore take unto you the whole armour of God." Ephesians 6:12-13
Top
User avatar
Clip
Member
Posts: 1581
Joined: Mon Mar 19, 2012 8:29 am
Location: Forest, VA

#6

Post by Clip »

Awesome work, as usual!
Click here to zoom: Under the Microscope

Manix2, Elmax MT13, M4 Manix2, ZDP Caly Jr, SB Caly3.5, Cruwear MT12, XHP MT16, South Fork, SB Caly3, 20CP Para2, Military Left Hand, Perrin PPT, Squeak, Manix 83mm, Swick3, Lil' Temperance, VG10 Jester, Dfly2 Salt, Tasman Salt

Chris
Top
User avatar
LC Kid
Member
Posts: 882
Joined: Mon Oct 15, 2012 6:50 pm

#7

Post by LC Kid »

Hi Folks!


Above Awesomeness! :cool:

Easily the best 'Skull Printed' scales I've seen in a long while.

Guess it would also be outstanding with the Skull in White or Safety Yellow or Lime Green. :D
Stay Sharp!
Top
BOOMER52
Member
Posts: 289
Joined: Sun Jan 27, 2013 9:22 am
Location: Crooked River Ranch, OR
Contact:
Contact BOOMER52

#8

Post by BOOMER52 »

Here's the finished knife...
Image
Top
User avatar
Evil D
Member
Posts: 28520
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#9

Post by Evil D »

That's the coolest design yet, but I think the skull needs to be white like the shirt.
~David
Top
mattman
Member
Posts: 1443
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

#10

Post by mattman »

Moonglow skull.

/thread
Top
User avatar
Spydersense
Member
Posts: 1431
Joined: Mon Jan 20, 2014 4:07 pm
Location: Wilsonville, Oregon

#11

Post by Spydersense »

Awesome scales Boomer!
Time for another :spyder:!

-Matt
Top
mattman
Member
Posts: 1443
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

#12

Post by mattman »

Forgive my manners...

Excellent work, Sir!
Top
BOOMER52
Member
Posts: 289
Joined: Sun Jan 27, 2013 9:22 am
Location: Crooked River Ranch, OR
Contact:
Contact BOOMER52

#13

Post by BOOMER52 »

Evil D wrote:That's the coolest design yet, but I think the skull needs to be white like the shirt.
Customer choice for the red... but white would look something like this...
Image
Top
User avatar
jmh58
Member
Posts: 1967
Joined: Thu May 23, 2013 7:57 pm
Location: Pgh, Pa

#14

Post by jmh58 »

Boomer... That is KOOOOLLLL!!! John
Not all who wander are lost!!!

Of all the paths you take in life...
Make sure some of them are Dirt!!! ;)
Top
BOOMER52
Member
Posts: 289
Joined: Sun Jan 27, 2013 9:22 am
Location: Crooked River Ranch, OR
Contact:
Contact BOOMER52

#15

Post by BOOMER52 »

Here's a lightbox shot...
Image
Top
User avatar
Monocrom
Member
Posts: 1331
Joined: Thu Apr 06, 2006 1:01 am
Location: NYC

#16

Post by Monocrom »

BOOMER52 wrote:Customer choice for the red... but white would look something like this...
Image
The white is even more impressive.

Will you be selling those scales in batches? Perhaps making some for other models?
"The World is insane, with small pockets of sanity here & there. Not the other way around."

:spyder:-John Cleese- :spyder:
Top
BOOMER52
Member
Posts: 289
Joined: Sun Jan 27, 2013 9:22 am
Location: Crooked River Ranch, OR
Contact:
Contact BOOMER52

#17

Post by BOOMER52 »

Monocrom wrote:The white is even more impressive.

Will you be selling those scales in batches? Perhaps making some for other models?
This was my first foray for the Spyderco brand... I have been machining these Punisher inlays on request for the Emerson CQC-7 and Commander. If I changed my business model and stopped accepting custom orders I could do batch runs... as it is I'm running a huge backlog with just individual orders.

In addition to the Resilience I have also mapped this inlay design to the Yojimbo and I have the CAD/CAM files but as yet I have not machined a set. I do not presently have a Yojimbo on hand for test fitting... so that's a COMING SOON type deal.

I'll attach the Cad Previews of a couple color combos for the Yojimbo. I'm now at the physical limit of my tooling and this is the smallest I can possibly machine the inlay. It has to do with the smallest inside radius of the inlay countour. The end mill has to fit into ALL radiuses or radii for both the inside pocketing AND the outside profile of the inlay coupon. I'm now using a very fragile .0394" 2 flute end mill which is the smallest I own...
Image
Top
User avatar
Monocrom
Member
Posts: 1331
Joined: Thu Apr 06, 2006 1:01 am
Location: NYC

#18

Post by Monocrom »

I appreciate the reply. Thank you. :)

I'd love a set of Resilience scales with the white Punisher logo. (And I don't even own a Resilience model.... yet.)
"The World is insane, with small pockets of sanity here & there. Not the other way around."

:spyder:-John Cleese- :spyder:
Top
User avatar
paladin
Member
Posts: 1947
Joined: Sun Feb 27, 2011 4:51 pm
Location: Hotel Carlton-San Francisco

#19

Post by paladin »

wow...impressive skill there BOOMER
What is truth? Pontius Pilate
Top
cornel616
Member
Posts: 11
Joined: Thu Jun 02, 2011 4:06 pm

#20

Post by cornel616 »

nice work
Top
Post Reply

Return to “Spyderco Picture Gallery”