New byrd model?
- defenestrate
- Member
- Posts: 2656
- Joined: Fri Sep 24, 2004 10:33 am
- Location: RTP NC area
- Contact:
I'm probably the least liked person on this forum right now, so take this with a grain of salt. However, Spyderco already donates 5% of Sage sales to the Denver chapter of the National Alzheimer's Association. I lost my paternal grandmother to Alzheimer's and finally terminal dementia, so that's a cause that's very close to my heart.
I think it would be great if at least one future Byrd model was named after a bird of prey, and a small percentage of sales were donated to the World Center for Birds of Prey in Boise, ID; or to a similar raptor conservation and rehab center.
I think it would be great if at least one future Byrd model was named after a bird of prey, and a small percentage of sales were donated to the World Center for Birds of Prey in Boise, ID; or to a similar raptor conservation and rehab center.
- defenestrate
- Member
- Posts: 2656
- Joined: Fri Sep 24, 2004 10:33 am
- Location: RTP NC area
- Contact:
-
- Member
- Posts: 44
- Joined: Fri Feb 07, 2014 4:30 pm
In the 20-30 dollar knife range, I feel consumer tastes are different than what the byrd line provides, and market is extremely saturated with these knives. Non knife people distinguish 20 dollar pocket knives by features not steel quality or company reputation. People want colors, gimicky glass breakers, seat belt cutters on their cheap knives. Smith and wesson border guards, Kabar Doziers, Sanrenmus stamped with Boker and countless other chinese imports cater to this market very well, Is it worth it for spyderco to enter this market. I personally dont think so, but I enjoy my byrd knife and this hobby.
God Bless
God Bless
Sal, I think brand recognition is the issue. I'll expand on that a bit. I think TargaMonteSS is correct on non-knife people focusing on superfluous features, but he's also correct that non-knife people recognize names like Smith and Wesson. After that, though, I'd divide knife people into two categories: Users and Aficionados. Users buy moderately priced knives to actually use, and most of those people know they don't superfluous features. They aren't Aficionados like us who frequent knife forums. Further, coming from the gun culture side of things, I've seen many gun aficionados who are knife people only in the tool user sense.We're also competing against hundreds of other Chinese made knifes, many from known named brands.
There's the problem, as I see it. It's only Aficionados who know that Byrd is part of Spyderco, and Byrd isn't targeted at aficionados. Users see the green box and the comet shaped blade hole and assume Byrd is Spyderco knockoff, and therefor must be inferior. Non-knife people don't know the brand either, and the knives don't have the cool factor for that group.
As points of comparison, the HK Pika series by Benchmade is the most direct competitor to the Byrd Robin / Meadowlark / Cara Cara line. Non-knife guys know the HK name, and they might buy it despite the lack of features. Knife users also know the HK name, and it's somewhat known in the gun community that Benchmade makes HK knives. Then there's Boker. They throw superfluous features at the non-knife folks with the Magnum line. Then they hit the knife user with simple, quality designs under the Boker Plus line. The knives are sturdy and users know the Boker name. Boker pushes the plus line further with things like the subcom and other CLB collaborations that even get knife aficionados to buy them. Kershaw takes an even more subtle approach. Everything is a Kershaw, and the US made knives get the US Flag / Made in USA logo added to the box and added on promotional materials. I know that Spyderco can't internally keep up with every other knife company, but take a look at Kershaw's Cryo line, along with the Thermite, Zing, and Chill. The Cryo models and the Thermite are Rick Hinderer designs. The Zing and Chill are RJ Martin designs. All of those are made in China, but they're very well made. With those Kershaw gives the non-knife guy name recognition, cool looks, neat pocket clips, and the fun factor of assisted opening. Users get name recognition, a designer they may have heard of, and a sturdy frame lock knife.
So, given my above reflections and comparisons to the competition, I have to wonder: Is it time to drop the Byrd name? Maybe it's time to put a round hole on the Meadowlark, sell it in a red and black Spyderco box, rename it the Standard, and make it the return of the C05. Then follow suit with the rest of the Byrds.
- Officer Gigglez
- Member
- Posts: 801
- Joined: Wed Nov 13, 2013 5:22 pm
- Location: Originally out of Arizona, currently live in Missouri.
Good calldefenestrate wrote:A karambit would be cool, but I'm not sure how well it would sell. That said, if fixed blades from byrd come out, a fixed karambit, made simply but with more of a traditional FMA-intended design, I think could sell well because of the price point and niche.
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
- Officer Gigglez
- Member
- Posts: 801
- Joined: Wed Nov 13, 2013 5:22 pm
- Location: Originally out of Arizona, currently live in Missouri.
Yeah. Those who buy the low priced knives generally are shooting for the "mall ninja" features.TargaMonteSS wrote:In the 20-30 dollar knife range, I feel consumer tastes are different than what the byrd line provides, and market is extremely saturated with these knives. Non knife people distinguish 20 dollar pocket knives by features not steel quality or company reputation. People want colors, gimicky glass breakers, seat belt cutters on their cheap knives. Smith and wesson border guards, Kabar Doziers, Sanrenmus stamped with Boker and countless other chinese imports cater to this market very well, Is it worth it for spyderco to enter this market. I personally dont think so, but I enjoy my byrd knife and this hobby.
God Bless
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
Depends on if they're non-knife people / knife wannabes, or if they're knife users who aren't aficionados like us. Non-aficionado users aren't swayed by mall ninja features. Opinel is still business, and the younger guys seem to have discovered Mora of Sweden as well. Those are both about as far from mall ninja as one can get.Yeah. Those who buy the low priced knives generally are shooting for the "mall ninja" features.
Yep :) .ugaarguy wrote:Depends on if they're non-knife people / knife wannabes, or if they're knife users who aren't aficionados like us. Non-aficionado users aren't swayed by mall ninja features. Opinel is still business, and the younger guys seem to have discovered Mora of Sweden as well. Those are both about as far from mall ninja as one can get.
Those seeking functional tools have found solace with some of the cheaper brands. Typically for the money the more flashy the less functional or well made. Fooling the YouTube generation is easy...the knife fanatics pick out the losers quickly. Byrds are a nice mix of modern and quality without the silliness.
I very much doubt that :) . All our salt is equal here, bud.ugaarguy wrote:I'm probably the least liked person on this forum right now, so take this with a grain of salt.
- Officer Gigglez
- Member
- Posts: 801
- Joined: Wed Nov 13, 2013 5:22 pm
- Location: Originally out of Arizona, currently live in Missouri.
Rough sketch I scribbled up today. The blade obviously needs to be longer in the pic to fit, but the measurements should remedy any confusion. Not sure on a name, and any/all criticisms, suggestions, etc. are welcome.
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
-
- Member
- Posts: 44
- Joined: Fri Feb 07, 2014 4:30 pm
-
- Member
- Posts: 44
- Joined: Fri Feb 07, 2014 4:30 pm
(This paragraph is a ramble.) I was thinking that if you could give people a little higher quality in a cheap knife, you could win a portion of the market over. If you can give higher quality at the same price, it will win opinions. At that point you could offer another moderate step up in quality for $10 more.
To me, it seems like the casual market is looking for different things than I am now. I will try to think back to when I was buying $20-30 knives.
When buying:
1. I want something that isn't ugly.
2. I want something that is easy to carry. (Clip, thin, light.)
3. I want something that doesn't feel bad in my hand.
4. I want something that is easy to operate.
5. I want something that feels reliable.
6. I want about a 3.5" blade.
7. Prefer USA made if possible.
After buying:
1. I want something that doesn't fall apart.
2. I want something that doesn't rust.
3. I want something that is easy to clean.
4. I didn't care about sharpening, if it got too dull, it would give me a chance to look for something different.
I used to think back lock was too difficult based on my history with bad back locks. I would buy liner/frame locks. The few knives I got before trying Byrd/Spyderco were frame locks with steel handles because they offered moderate weight and felt sturdy. (If anyone here remembers, I used to not think much of frame locks because they all felt cheap, I still don't like them, but I put up with them.) I didn't need extreme ergonomics, I didn't need extreme wear resistance or carbides, I didn't need tip up, tip down, I carried tip down because it was more available.
I was not looking for a tactical folder or high abuse folder because I didn't want to pay extra for those features. I just wanted a simple knife that would offer me the most (from my list of demands :p ) for my money.
So, in relation to Byrd, what could we offer to this market?
Why doesn't Byrd make more Liner/Frame locks? More open construction?
8Cr13MoV doesn't seem to offer great corrosion resistance, are all other manufacturers using 8Cr13MoV on their China made knives? I still think CTS-BD1 would make Byrd stand out as higher quality.
IMO, Spyderco's strong point is the LBK's. It seems like a LBK with a clip and liner lock would be good for the market.
To me, it seems like the casual market is looking for different things than I am now. I will try to think back to when I was buying $20-30 knives.
When buying:
1. I want something that isn't ugly.
2. I want something that is easy to carry. (Clip, thin, light.)
3. I want something that doesn't feel bad in my hand.
4. I want something that is easy to operate.
5. I want something that feels reliable.
6. I want about a 3.5" blade.
7. Prefer USA made if possible.
After buying:
1. I want something that doesn't fall apart.
2. I want something that doesn't rust.
3. I want something that is easy to clean.
4. I didn't care about sharpening, if it got too dull, it would give me a chance to look for something different.
I used to think back lock was too difficult based on my history with bad back locks. I would buy liner/frame locks. The few knives I got before trying Byrd/Spyderco were frame locks with steel handles because they offered moderate weight and felt sturdy. (If anyone here remembers, I used to not think much of frame locks because they all felt cheap, I still don't like them, but I put up with them.) I didn't need extreme ergonomics, I didn't need extreme wear resistance or carbides, I didn't need tip up, tip down, I carried tip down because it was more available.
I was not looking for a tactical folder or high abuse folder because I didn't want to pay extra for those features. I just wanted a simple knife that would offer me the most (from my list of demands :p ) for my money.
So, in relation to Byrd, what could we offer to this market?
Why doesn't Byrd make more Liner/Frame locks? More open construction?
8Cr13MoV doesn't seem to offer great corrosion resistance, are all other manufacturers using 8Cr13MoV on their China made knives? I still think CTS-BD1 would make Byrd stand out as higher quality.
IMO, Spyderco's strong point is the LBK's. It seems like a LBK with a clip and liner lock would be good for the market.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!