What would you commission? Sprint Run

Discuss Spyderco's products and history.
User avatar
The Mastiff
Member
Posts: 5951
Joined: Sun Jun 04, 2006 2:53 am
Location: raleigh nc

#121

Post by The Mastiff »

Over the years, ending in the near future with the Cruwear millie Spyderco has made everything I really could ask for from a production company. The various Super blue sprints are ones I wanted for years. Likewise the Cruwear millie. I had wished for a full size, strong, slicer cutter in Cruwear. The Millie fits the bill perfectly. They have made sprints in BG42 ( millie), S90V ( various, especially Millie and P2), CPM M4 ( Millie and Bradley), ZDP ( jess horns and Caly Jr's especially, though the stretch is a favorite of mine in ZDP).

They even took out the tool steels and made an O-1 fixed blade.

A 3V large, heavy duty folder,

The whole mule team program. I have every one so far and plan to continue as long as possible.

I can keep going. I don't feel entitled to ask for more than they have already done. If I never was able to buy another knife and lived two hundred more years I'd be just fine. :) Naturally I'll have to explore every new steel, and the folders I like and can afford as they come out. They just seem to get better and better even though they had several perfect ones for me already.

Thank you Sal and the Spyderco team

Joe
"A Mastiff is to a dog what a Lion is to a housecat. He stands alone and all others sink before him. His courage does not exceed temper and generosity, and in attachment he equals the kindest of his race" Cynographia Britannic 1800


"Unless you're the lead dog the view is pretty much gonna stay the same!"
Bladekeeper
Member
Posts: 936
Joined: Fri Sep 07, 2012 7:24 pm

#122

Post by Bladekeeper »

GoodEyeSniper wrote:Military with Titanium framelock, g10 scale on the non lock side, and a CPM M4 blade. ;)



On most backlocks the area of the tang right before the sharpened edge is what stops it. Often called the "kick" I think? Granted, I've never held a Matriarch.

Not sure on the scale swapping.
Thank you for the reply the gent I brought it from said the same .
But wasn't entirely sure :) .
chewy667
Member
Posts: 21
Joined: Thu Jul 01, 2010 10:26 pm

#123

Post by chewy667 »

Full carbon fiber centofante 3 with a mother of pearl spydie logo on the side and a Damascus blade
User avatar
defenestrate
Member
Posts: 2656
Joined: Fri Sep 24, 2004 10:33 am
Location: RTP NC area
Contact:

#124

Post by defenestrate »

Superhawk with scaleless titanium handles and serrated H1 blade.

<drools>

HSS Kris would rock as well.
-
Happy, Happy, Happy! Peel, Peel, Peel!
arty
Member
Posts: 417
Joined: Sat Oct 09, 2010 11:59 am

#125

Post by arty »

I don't mean to nag, but I would be happy to pick up another CF Chaparral, but in ZDP-189. The S30V is pretty good, and cut lots of nylon and polyester rope when I helped my daughter move, but a steel upgrade would work for me.
grewich
Member
Posts: 137
Joined: Sat Dec 31, 2011 1:19 pm
Location: indy

#126

Post by grewich »

M4 Dragonfly. With Bradley style CF. boom.
User avatar
xceptnl
Member
Posts: 8594
Joined: Mon Feb 21, 2011 7:48 pm
Location: Tobacco Country, Virginia
Contact:

#127

Post by xceptnl »

grewich wrote:M4 Dragonfly. With Bradley style CF. boom.
This sprint would sell out before the first shipment left the plant!
Image
sal wrote: .... even today, we design a knife from the edge out!
*Landon*
User avatar
jabba359
Member
Posts: 4958
Joined: Fri Feb 10, 2006 11:07 pm
Location: North Hollywood, CA U.S.A. Earth
Contact:

#128

Post by jabba359 »

I mocked up a sprint I'd love to see a while back: CF large Persian with bolsters and a Damascus blade. I like the CF used on the Taiwan knives, but think Lightning Strike with textured copper bosters would be pretty sweet as well.

[ATTACH]22063[/ATTACH]

I'd also be game for a Super-Blue Dialex Junior, buffed red G-10 Kris (to match the Persian sprint), or heat anodized fluted Ti Military in M4.
Attachments
Persian CF Done.jpg
Persian CF Done.jpg (92.58 KiB) Viewed 2268 times
-Kyle

:bug-red
Latest arrivals: Lava Flow CF DLC Para2, Magnacut Mule, GITD Jester

http://www.spydiewiki.com
User avatar
ASmitty
Member
Posts: 994
Joined: Fri Sep 24, 2004 10:33 am
Location: South Dakota
Contact:

#129

Post by ASmitty »

Manix 2 with the following specs:
All jimping removed
CTS 204P (CTS XHP a close second) with stonewashed finish
G-10 handles of a slightly darker blue than the Sage 3
Make it linerless construction and thicken the G-10 scales so overall thickness remains the same
Change it to a wire clip to accommodate linerless construction
Also add a G-10 backspacer to close the construction
"A flute with no holes is not a flute. A donut with no hole, is a danish."

Quietly lurking the Spyderco forum since 2003...
grewich
Member
Posts: 137
Joined: Sat Dec 31, 2011 1:19 pm
Location: indy

#130

Post by grewich »

How about a Gayle Bradley in M390 or 204p or even 20CP?
User avatar
Jes Schuetz
Member
Posts: 38
Joined: Mon Jun 17, 2013 8:37 pm

#131

Post by Jes Schuetz »

1st)
Matriarch 2 in H1


2nd)
Old native blade. Swedge and serration make it look like a native arrow head.
With new scales (metal in scales) and torx screw instead of pin.

3rd)
Tasman with stronger scales
Skidoosh
Member
Posts: 624
Joined: Tue Apr 30, 2013 1:48 pm

#132

Post by Skidoosh »

grewich wrote:M4 Dragonfly. With Bradley style CF. boom.
I would be all over that. Would love to see more steels in the Dfly- K390
User avatar
TSchloz
Member
Posts: 107
Joined: Thu May 15, 2008 3:58 pm
Location: USA

#133

Post by TSchloz »

Burgundy Centofante 3 with silver bug and ZDP.

Tom
GoodEyeSniper
Member
Posts: 400
Joined: Wed Feb 08, 2012 10:32 am

#134

Post by GoodEyeSniper »

spyderco ss police, fully serrated, with the top Swedge sharpened, and the scales would have a basic engraving for grip. thinking something like the nice checkering you see on nice 1911 pistol grips, or on old, wooden shotguns/rifles.
User avatar
noddy
Member
Posts: 329
Joined: Tue Nov 06, 2007 4:08 pm
Location: Chicago

#135

Post by noddy »

I am a bore:

Black G10 and VG10 sodbuster
Rayd
Member
Posts: 47
Joined: Fri Sep 24, 2004 10:33 am
Location: upstate NY

#136

Post by Rayd »

A fluted Ti Military with a damascus blade.
I really, really need this just because.
"Dogs are our link to paradise. They don't know evil or jealousy or discontent. To sit with a dog on a hillside on a glorious afternoon is to be back in Eden, where doing nothing was not boring--it was peace."
- Milan Kundera
User avatar
D1omedes
Member
Posts: 1279
Joined: Sat Aug 22, 2009 8:54 pm
Location: Houston, Texas, USA

#137

Post by D1omedes »

Caly 3.5 in XHP (or 20CP) and navy blue G10. Oh, also add the flat pivot screw that was on the recent Calypso sprint. :D
iyn
Member
Posts: 170
Joined: Fri Aug 14, 2009 12:54 pm

#138

Post by iyn »

G-10 Endura & delica FFG, VG-10. I missed the the last sprint runs.
gdwtvb
Member
Posts: 285
Joined: Sat Jan 10, 2009 6:55 am
Location: Western NY

#139

Post by gdwtvb »

#1 Ti handled Ladybug or Manbug. ZPD would be fine for the steel. Even VG-10, is a good steel.

#2 Ti handle with a H1 blade Salt 1 or similar.

Grizz
User avatar
Holland
Member
Posts: 7567
Joined: Fri Jan 06, 2012 10:37 pm
Location: Alberta

#140

Post by Holland »

chaparral with orange or blue or some bright color FRN with K294 steel
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Post Reply