A place for you to post your pictures of Spyderco knives. Read Announcement before posting!
LC Kid
Member
Posts: 882 Joined: Mon Oct 15, 2012 6:50 pm
#1301
Post
by LC Kid » Tue Jun 04, 2013 5:56 pm
Hi Mr. Barman!
And welcome to the :spyder:
Forums.
Barman wrote:
This one has to be the most 'High End Light Knife ' ever! :D
Stay Sharp !
Barman
Member
Posts: 39 Joined: Tue Jun 04, 2013 5:09 pm
#1302
Post
by Barman » Tue Jun 04, 2013 6:25 pm
LC Kid wrote: Hi Mr. Barman!
And welcome to the :spyder: Forums.
This one has to be the most 'High End Light Knife ' ever! :D
Thanks for the welcome guys!
Real happy with the blade. A real attention grabber.
SteelyDan
Member
Posts: 47 Joined: Sun Apr 22, 2012 8:45 am
Location: South East Kansas
#1303
Post
by SteelyDan » Tue Jun 04, 2013 9:45 pm
Here's a try at showing an image of the first Spyderco Customizing I attempted last year. I still have yet to put an edge on it because my brother will claim it as his! : )
Boomer52, thanks very much for the help !
"I would rather wake up in the middle of no where than in any city on earth" (Steve McQueen)
"There are just two things money cannot buy. One is True Love, and the other is Home Grown Tomatoes"
BOOMER52
Member
Posts: 289 Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:
#1304
Post
by BOOMER52 » Sun Jun 09, 2013 12:37 pm
Did this yesterday... hunter orange G10 with orange back spacer on a modified Delica profile... large Anso pattern... SWEET!!!
jmh58
Member
Posts: 1967 Joined: Thu May 23, 2013 7:57 pm
Location: Pgh, Pa
#1305
Post
by jmh58 » Sun Jun 09, 2013 12:45 pm
WOW!! NICE!! Yep!! John
Not all who wander are lost!!!
Of all the paths you take in life...
Make sure some of them are Dirt!!!
noseoil
Member
Posts: 506 Joined: Sun Apr 07, 2013 5:28 pm
#1306
Post
by noseoil » Wed Jun 12, 2013 10:00 pm
Another Delica scale mod from the Boomer. Thanks, these are great!
BOOMER52
Member
Posts: 289 Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:
#1307
Post
by BOOMER52 » Thu Jun 13, 2013 9:51 am
I wish I would of known you were going with a lanyard I would of sent a skull bead with the scales! I think I'll do just that... I'll pop a bead in the mail for ya...!
Steve
BOOMER52
Member
Posts: 289 Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:
#1308
Post
by BOOMER52 » Fri Jun 14, 2013 6:57 pm
Finally got in some more toxic green G10. Modified Delica with deep PUNISHER texture. Lanyard hole has also been relocated...
ourgon
Member
Posts: 123 Joined: Mon Mar 04, 2013 3:48 pm
Location: Poland
#1311
Post
by ourgon » Sat Jun 15, 2013 3:23 am
Bladekeeper
Member
Posts: 936 Joined: Fri Sep 07, 2012 7:24 pm
#1312
Post
by Bladekeeper » Sat Jun 15, 2013 8:39 pm
Excuse my ignorance that's a Endura y/n and would this fit out straight to a matriach if it is ?
Or is it a Delica ? Hard to see on iPod thank you :) .
polyhexamethyl
Member
Posts: 258 Joined: Tue Mar 12, 2013 11:01 pm
Location: Austria
#1313
Post
by polyhexamethyl » Sat Jun 15, 2013 9:34 pm
according to the ratio clip/handle i would say it's a delica
aogami super blue dragonfly!
Tekila
Member
Posts: 3 Joined: Thu Jul 14, 2011 2:00 pm
#1314
Post
by Tekila » Sun Jun 16, 2013 4:18 am
yes it's my orange G10 delica, i ordered a set of scales from cuscadi.
BOOMER52
Member
Posts: 289 Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:
#1315
Post
by BOOMER52 » Sun Jun 16, 2013 7:25 pm
Designed these last night and carved them today... Tribal Skulls carved in black G10 for a modified Delica. It machined exactly as designed... came out beautifully!
jackknifeh
Member
Posts: 8412 Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle
#1316
Post
by jackknifeh » Sun Jun 16, 2013 8:45 pm
BOOMER52 wrote: Did this yesterday... hunter orange G10 with orange back spacer on a modified Delica profile... large Anso pattern... SWEET!!!
Nice work on the Anso design. Can you tell me how you carve that and/or what tools you use?
BOOMER52
Member
Posts: 289 Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:
#1317
Post
by BOOMER52 » Sun Jun 16, 2013 9:02 pm
jackknifeh wrote: Nice work on the Anso design. Can you tell me how you carve that and/or what tools you use?
I use a homebrew CNC router I built several years ago. The Anso texture is carved with a 1" ball nose bit. The CNC & the gcode makes it accurate, precise and repeatable.
Steve
Bladekeeper
Member
Posts: 936 Joined: Fri Sep 07, 2012 7:24 pm
#1318
Post
by Bladekeeper » Sun Jun 16, 2013 9:29 pm
polyhexamethyl wrote: according to the ratio clip/handle i would say it's a delica
Thanks
the only Delica I have brought is the Santa-Fe mop turquoise .
And the scales on that are much easier to gauge than the FRN.
wolfgaze
Member
Posts: 278 Joined: Mon Apr 08, 2013 4:28 am
#1319
Post
by wolfgaze » Mon Jun 17, 2013 7:02 am
BOOMER52 wrote: Designed these last night and carved them today... Tribal Skulls carved in black G10 for a modified Delica. It machined exactly as designed... came out beautifully!
Beautiful work... You should do a design with a wolf head(s). : )