Show your mods!

A place for you to post your pictures of Spyderco knives. Read Announcement before posting!
User avatar
LC Kid
Member
Posts: 870
Joined: Mon Oct 15, 2012 6:50 pm

Postby LC Kid » Tue Jun 04, 2013 5:56 pm

Hi Mr. Barman!


And welcome to the
:spyder: Forums.
Barman wrote: Image
This one has to be the most 'High End Light Knife' ever! :D
Stay Sharp!

Barman
Member
Posts: 39
Joined: Tue Jun 04, 2013 5:09 pm

Postby Barman » Tue Jun 04, 2013 6:25 pm

LC Kid wrote:Hi Mr. Barman!


And welcome to the
:spyder: Forums.



This one has to be the most 'High End Light Knife' ever! :D
Thanks for the welcome guys!
Real happy with the blade. A real attention grabber.

User avatar
SteelyDan
Member
Posts: 47
Joined: Sun Apr 22, 2012 8:45 am
Location: South East Kansas

Postby SteelyDan » Tue Jun 04, 2013 9:45 pm

Here's a try at showing an image of the first Spyderco Customizing I attempted last year. I still have yet to put an edge on it because my brother will claim it as his! : )
Image

Boomer52, thanks very much for the help !
"I would rather wake up in the middle of no where than in any city on earth" (Steve McQueen)

"There are just two things money cannot buy. One is True Love, and the other is Home Grown Tomatoes"

User avatar
BOOMER52
Member
Posts: 242
Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:

Postby BOOMER52 » Sun Jun 09, 2013 12:37 pm

Did this yesterday... hunter orange G10 with orange back spacer on a modified Delica profile... large Anso pattern... SWEET!!!

Image

jmh58
Member
Posts: 1945
Joined: Thu May 23, 2013 7:57 pm
Location: Pgh, Pa

Postby jmh58 » Sun Jun 09, 2013 12:45 pm

WOW!! NICE!! Yep!! John
A great rabbit chase ends with a.. BANG!!!

Son.. You need to get off the front porch once n a while!!!

Not all who wander are lost!!!

User avatar
noseoil
Member
Posts: 506
Joined: Sun Apr 07, 2013 5:28 pm

Postby noseoil » Wed Jun 12, 2013 10:00 pm

Another Delica scale mod from the Boomer. Thanks, these are great!

Image

User avatar
BOOMER52
Member
Posts: 242
Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:

Postby BOOMER52 » Thu Jun 13, 2013 9:51 am

I wish I would of known you were going with a lanyard I would of sent a skull bead with the scales! I think I'll do just that... I'll pop a bead in the mail for ya...!

Steve

User avatar
BOOMER52
Member
Posts: 242
Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:

Postby BOOMER52 » Fri Jun 14, 2013 6:57 pm

Finally got in some more toxic green G10. Modified Delica with deep PUNISHER texture. Lanyard hole has also been relocated...

Image

Image

appliancejunk
Member
Posts: 69
Joined: Thu Sep 22, 2011 6:37 pm
Location: South Dakota

Postby appliancejunk » Fri Jun 14, 2013 9:11 pm

BOOMER52 are these for sale?

Tekila
Member
Posts: 3
Joined: Thu Jul 14, 2011 2:00 pm

Postby Tekila » Sat Jun 15, 2013 12:13 am

My beloved one by Cuscadi :
Image
Image
Image
Image

User avatar
ourgon
Member
Posts: 123
Joined: Mon Mar 04, 2013 3:48 pm
Location: Poland

Postby ourgon » Sat Jun 15, 2013 3:23 am

Image

Bladekeeper
Member
Posts: 936
Joined: Fri Sep 07, 2012 7:24 pm

Postby Bladekeeper » Sat Jun 15, 2013 8:39 pm

Tekila wrote:My beloved one by Cuscadi :
Image
Image
Image
Image
Excuse my ignorance that's a Endura y/n and would this fit out straight to a matriach if it is ?

Or is it a Delica ? Hard to see on iPod thank you :) .

User avatar
polyhexamethyl
Member
Posts: 257
Joined: Tue Mar 12, 2013 11:01 pm
Location: Austria

Postby polyhexamethyl » Sat Jun 15, 2013 9:34 pm

according to the ratio clip/handle i would say it's a delica ;)
aogami super blue dragonfly!

Tekila
Member
Posts: 3
Joined: Thu Jul 14, 2011 2:00 pm

Postby Tekila » Sun Jun 16, 2013 4:18 am

yes it's my orange G10 delica, i ordered a set of scales from cuscadi.

User avatar
BOOMER52
Member
Posts: 242
Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:

Postby BOOMER52 » Sun Jun 16, 2013 7:25 pm

Designed these last night and carved them today... Tribal Skulls carved in black G10 for a modified Delica. It machined exactly as designed... came out beautifully!

Image

User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

Postby jackknifeh » Sun Jun 16, 2013 8:45 pm

BOOMER52 wrote:Did this yesterday... hunter orange G10 with orange back spacer on a modified Delica profile... large Anso pattern... SWEET!!!

Image

Nice work on the Anso design. Can you tell me how you carve that and/or what tools you use?

User avatar
BOOMER52
Member
Posts: 242
Joined: Sun Jan 27, 2013 10:22 am
Location: Crooked River Ranch, OR
Contact:

Postby BOOMER52 » Sun Jun 16, 2013 9:02 pm

jackknifeh wrote:Nice work on the Anso design. Can you tell me how you carve that and/or what tools you use?
I use a homebrew CNC router I built several years ago. The Anso texture is carved with a 1" ball nose bit. The CNC & the gcode makes it accurate, precise and repeatable.

Steve

Bladekeeper
Member
Posts: 936
Joined: Fri Sep 07, 2012 7:24 pm

Postby Bladekeeper » Sun Jun 16, 2013 9:29 pm

polyhexamethyl wrote:according to the ratio clip/handle i would say it's a delica ;)
Thanks ;) the only Delica I have brought is the Santa-Fe mop turquoise .
And the scales on that are much easier to gauge than the FRN.

User avatar
wolfgaze
Member
Posts: 278
Joined: Mon Apr 08, 2013 4:28 am

Postby wolfgaze » Mon Jun 17, 2013 7:02 am

BOOMER52 wrote:Designed these last night and carved them today... Tribal Skulls carved in black G10 for a modified Delica. It machined exactly as designed... came out beautifully!
Beautiful work... You should do a design with a wolf head(s). : )

User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

Jester (G-10 grey sprint run) with kirinite lava-flow scales

Postby jackknifeh » Mon Jun 17, 2013 7:46 am

Image
Image


Return to “Spyderco Picture Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest