Brad Southard Flipper Arrived!! Lots of Photos/Video
Does this helprororo64 wrote:Can someone take a picture comparing thickness of the handles of the Southard and Para 2?
Current EDC: Techno, Squeak, Southard Flipper, Caly 3.5
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE
It's a Para2 clip using the right most hole then shaved down the left side till the holes disappeared. It holds the knife a little more vertical in the pocket. Plus it feel more comfortable to me. The stock clip in the pic below was fiddled with also.nccole wrote:What exactly did yo do to that clip? I am scratching my head at the holes or lack of.
- Gary W Graley
- Member
- Posts: 254
- Joined: Fri Sep 24, 2004 10:33 am
- Contact:
Nice what did you use to etch it with?
G2
G2
"The Road to **** is Paved with Good Intentions!"
Take the time to read your Bible Now, don't be left behind...
Psalm 1
Take the time to read your Bible Now, don't be left behind...
Psalm 1
Beautiful -- thanks for sharing!eloreno wrote:My pocketclip mod needs stone washing before its complete.
The first steps are done however as I've rounded all corners and acid etched it.
-
- Member
- Posts: 296
- Joined: Thu Sep 01, 2011 1:14 pm
Some great clip mods here guys!
Just curious, What is it that most of you arnt likeing about the clip.
The comments I'm getting the most is
Doesnt match frame, aka not titanium
The tip is a little sharp.
Would love to here if thats how you feel as well.
Just curious, What is it that most of you arnt likeing about the clip.
The comments I'm getting the most is
Doesnt match frame, aka not titanium
The tip is a little sharp.
Would love to here if thats how you feel as well.
Brad Southard
Southard Knives
"Whatever you do, work at it with all your heart, as working for the Lord, not for men," Colossians 3:23
Southard Knives
"Whatever you do, work at it with all your heart, as working for the Lord, not for men," Colossians 3:23
If you bend that clip over a little bit, off the lockbar it will slide in and out of your pocket a little eaiser. Sometimes if the clip is right above the lock relief like that, the seam of your pants can catch inside the lockbar as you withdraw the knife. On a clip with high tension it can practically get stuck!Shakyamuni wrote:Southard has a 0.531" handle thickness (measured by BladeHQ in their video) and Para 2 has 0.455" thickness.
And while people are sharing their clip mods, here's mine...
Brad Southard
Southard Knives
"Whatever you do, work at it with all your heart, as working for the Lord, not for men," Colossians 3:23
Southard Knives
"Whatever you do, work at it with all your heart, as working for the Lord, not for men," Colossians 3:23
I'm still waiting on mine so its hard to judge 100% but from all the pictures and YouTube vids I have been looking at, I kind of like the clip the way it comes original. Nothing wrong with a little contrast.Brad S. wrote:Some great clip mods here guys!
Just curious, What is it that most of you arnt likeing about the clip.
The comments I'm getting the most is
Doesnt match frame, aka not titanium
The tip is a little sharp.
Would love to here if thats how you feel as well.
I haven't been this impatient to receive a knife in a long time. Can't wait to get this one and starting using it.
On the clip, in my opinion...compared to the amazing quality of design, materials and manufacturing, the finish on the clip is a little "meh." :) Personally, I like the design of the clip very well, but the finish clashes a bit with the very nice stonewash finish on the titanium. :spyder:Brad S. wrote:Some great clip mods here guys!
Just curious, What is it that most of you arnt likeing about the clip.
The comments I'm getting the most is
Doesnt match frame, aka not titanium
The tip is a little sharp.
Would love to here if thats how you feel as well.
- psychophipps
- Member
- Posts: 480
- Joined: Wed Oct 07, 2009 9:19 am
- Location: Texas, in the RGV
Hi, Brad,
It's a real beaut as is!
Did you consider an all-ti version?
It's a real beaut as is!
Did you consider an all-ti version?
I'm looking forward to getting one of these when the initial rush dies down and they become more readily available. Can anyone explain what the small G-10 insert is for on the titanium side? See green highlighted area in pic:
[SIGPIC][/SIGPIC] <--- My Spydies <click the dancing banana!>
It to prevent overtravel of the lockbar! Like the Hinderer Lock Stop.Jay_Ev wrote:I'm looking forward to getting one of these when the initial rush dies down and they become more readily available. Can anyone explain what the small G-10 insert is for on the titanium side? See green highlighted area in pic:
Current EDC: Techno, Squeak, Southard Flipper, Caly 3.5
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE
New Arrivals: Chap3, Domino, Sage 3
2014 Wishlist: Yo2 CF, Deviant Friction, Tatanka, Tusk, Firefly
Oldies Wishlist: Delica CF PE, Civilian CF PE