CHEF'S CHOICE SHARPENER???

Discuss Spyderco's products and history.
tecx226
Member
Posts: 13
Joined: Fri Sep 24, 2004 10:33 am
Location: OrYgUn USA

CHEF'S CHOICE SHARPENER???

Postby tecx226 » Tue Jun 17, 2003 12:00 am

Has anyone used a Chef's Choice knife sharpener?

The model #120 comes highly recommended by a friend who is a professional chef.



slow is smooth, smooth is fast

Sword and Shield
Member
Posts: 2050
Joined: Fri Sep 24, 2004 10:33 am
Location: USA

Postby Sword and Shield » Tue Jun 17, 2003 3:16 pm

Howdy Tecx! Welcome to <img src="spyder.gif" width=15 height=15 align=middle border=0>Land! <img src="smile.gif" width=15 height=15 align=middle border=0>

I've heard that those are fast for putting on an okay edge, but can't put on a really razor sharp edge. It's hearsay, of course, but I just report the rumors.

If you want a really excellent sharpener for around the same price, I'd suggest the <img src="spyder.gif" width=15 height=15 align=middle border=0> 204MF. It can put an edge on anythign that has an edge. <img src="smile.gif" width=15 height=15 align=middle border=0>

By the time you read this, you'll have already read it.

tecx226
Member
Posts: 13
Joined: Fri Sep 24, 2004 10:33 am
Location: OrYgUn USA

Postby tecx226 » Wed Jun 18, 2003 12:15 am

Thanks S&S,
It's great to be a member of the forum for such a great tool and company!!!
<img src="spyder.gif" width=15 height=15 align=middle border=0>ROCK!!!
Maybe I haven't felt a really sharp edge. I can shave the hair off my arm with a knife sharpened with the 120 though.
One of the biggest advantages of the 120 is that the angle is consistent.

slow is smooth, smooth is fast

ftkinney
Member
Posts: 527
Joined: Fri Sep 24, 2004 10:33 am
Location: Texan living in New Jersey USA

Postby ftkinney » Wed Jun 18, 2003 9:19 am

I had a guy demo one for me and it might be fine for large kitchen knives but it can't sharpen the last 1/8" - 3/16" of blade and if your blade (delica, navigator etc) isn't that long you what all the edge that it has. The 120 took off a lot of steel I had him sharpen my victorinox and you can see where the tool carves into it and this was 3 years ago and it is still there. I only had him sharpen it on the middle wheel and the strop I wonder how much steel the rough wheel would have taken off.

I will admit it does get the edge very sharp very fast.

I hope that this picture makes sence. Boy a scan shows all the tiny sraches.

tecx226
Member
Posts: 13
Joined: Fri Sep 24, 2004 10:33 am
Location: OrYgUn USA

Postby tecx226 » Wed Jun 18, 2003 10:56 pm

thanks ft
I sharpened a PE Delica on the 120. I could get back all the way, but it did take a little off the corner of the kicker. Yeah, it does tend to take more metal off but not anywhere as much as your blade. I don't know what the guy was doing that sharpened your Victorinox. Did the 120 cause the scratches that are the width of your blade too?
How do you keep your angle consistent with the Sharp Maker?

slow is smooth, smooth is fast

ftkinney
Member
Posts: 527
Joined: Fri Sep 24, 2004 10:33 am
Location: Texan living in New Jersey USA

Postby ftkinney » Thu Jun 19, 2003 9:31 am

I think the guy wasn't so good the scraches are from use but they look 100x worse in this scan than they do in real life. The blade is only a 1/16" at the widest part. It is really easy to keep the angle consitant, just keep your hand strait up and down, perpendicular to the suface that the 204 base is sitting on.

charlie
Member
Posts: 248
Joined: Fri Sep 24, 2004 10:33 am
Location: Santa Maria, CA USA

Postby charlie » Thu Jun 19, 2003 9:43 am

I own a Chefs Choice 120 electric sharpener.
I DO NOT USE IT ON COLLECTORS OR SPYDERCO KNIVES because it scratches the surface above the edge. Sharpens quickly and does a fine job and I use it on kitchen knives that are not damaged by a few superficial scratches.
examples of knives that I sharpen with the 120 are CASE kitchen knives (high carbon steel not highly polished surfaces), utility knives, some pocket knives and whittling tools.
The Spyderco 204 sharpner is my choice for a sharpening device that works on all my good knives without incurring any damage.
<img src="spyder.gif" width=15 height=15 align=middle border=0> Collector #047

tecx226
Member
Posts: 13
Joined: Fri Sep 24, 2004 10:33 am
Location: OrYgUn USA

Postby tecx226 » Fri Jun 20, 2003 11:24 am

Thanks Spyder Knuts!!!
I have a 204MF on the way!
I will probably get a 120 to make short work of kitchen knives, etc.
like Charlie is talking about.
BTW:The best price I can find on the 120 is at the following link.
http://leoinc.safeshopper.com/317/881.htm?954

slow is smooth, smooth is fast


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], bubu56, Holland, Julien Viapiana, kobold, Majestic-12 [Bot], Mr.Green, vivi, Wartstein and 34 guests