How did you use your Spyderco today?

Discuss Spyderco's products and history.
KardinalSyn
Member
Posts: 1394
Joined: Mon Nov 28, 2011 9:39 pm
Location: Colombo, Sri Lanka

#281

Post by KardinalSyn »

Used my Millie to cut a cake. A bit of cake got inside th ehandle and now I need to clean it once I get home :(
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
RIOT
Member
Posts: 2923
Joined: Mon Mar 17, 2008 2:25 pm

#282

Post by RIOT »

been using my ss ladybug to pop tops off of beers
Kid Shamrock
Member
Posts: 19
Joined: Mon Apr 02, 2012 12:15 pm

#283

Post by Kid Shamrock »

I used my Byrd Cara Cara 2 Rescue SE to cut a piece of 3/4" PVC pipe to repair a water line. I tried a plain edge knife first and was not making much progress until I switched to the serrated edge. The serrated edge cut through the pipe really well.
User avatar
chuck_roxas45
Member
Posts: 8776
Joined: Wed Mar 03, 2010 5:43 pm
Location: Small City, Philippines

#284

Post by chuck_roxas45 »

I used my grey caly to open a package with my pre need replacement grey caly. :D
KardinalSyn
Member
Posts: 1394
Joined: Mon Nov 28, 2011 9:39 pm
Location: Colombo, Sri Lanka

#285

Post by KardinalSyn »

chuck_roxas45 wrote:I used my grey caly to open a package with my pre need replacement grey caly. :D
Did the vendor have any more in stock?
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
User avatar
chuck_roxas45
Member
Posts: 8776
Joined: Wed Mar 03, 2010 5:43 pm
Location: Small City, Philippines

#286

Post by chuck_roxas45 »

KardinalSyn wrote:Did the vendor have any more in stock?
It was from a private individual KS.
xc6w
Member
Posts: 19
Joined: Thu Dec 30, 2010 12:11 pm

#287

Post by xc6w »

Used my Delica to strike a firesteel and managed to pull a really small fire going.

[ATTACH]20126[/ATTACH]
Attachments
delica.jpg
First Spyderco - Delica 4
KardinalSyn
Member
Posts: 1394
Joined: Mon Nov 28, 2011 9:39 pm
Location: Colombo, Sri Lanka

#288

Post by KardinalSyn »

chuck_roxas45 wrote:It was from a private individual KS.
Thanks Chuck. Thought it might be something like that.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
User avatar
Donut
Member
Posts: 9575
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#289

Post by Donut »

Yesterday I sharpened my new PPT, today I showed it to my manager and he used it to cut himself. After he told me that it was really sharp. :D
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
User avatar
chuck_roxas45
Member
Posts: 8776
Joined: Wed Mar 03, 2010 5:43 pm
Location: Small City, Philippines

#290

Post by chuck_roxas45 »

Donut wrote:Yesterday I sharpened my new PPT, today I showed it to my manager and he used it to cut himself. After he told me that it was really sharp. :D
Did you use the SiC stones to do that?
User avatar
Donut
Member
Posts: 9575
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#291

Post by Donut »

I did use it, I did DMT Fine to take the factory grind lines off, DMT Extra fine, then SiC 600, then Spyderco Ceramic Fine, then Spyderco Ceramic Ultra Fine, then strop.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
tahomazz
Member
Posts: 64
Joined: Sun Sep 12, 2010 10:42 pm

#292

Post by tahomazz »

I used my sage1 to open my university acceptence envelope!
Ghost
Member
Posts: 37
Joined: Tue Mar 13, 2012 7:41 pm
Location: Sweden

#293

Post by Ghost »

Yesterday I used my Native to open an envelope containing my Dragonfly2 :D
User avatar
Mr Blonde
Member
Posts: 7660
Joined: Fri Sep 24, 2004 10:33 am
Location: The Netherlands, Europe, Earth
Contact:

#294

Post by Mr Blonde »

Sage 4 opened a cookie wrapper for my daughter, certainly the most appreciated 'cut' of the day ;) .
My Spyderco Pics & Reviews: www.spydercollector.com
Last website update: 4-28-2024 Instagram
User avatar
Fred S
Member
Posts: 172
Joined: Wed Sep 03, 2008 8:19 pm
Location: Houston, TX

#295

Post by Fred S »

Set up a ton of IKEA stuff today, S30V PM2 has cut maybe 50 feet of cardboard, with at least another 30 on the way to break down the big pieces for recycling. Went from pretty smooth shaving of arm hair to just popping off a few here and there. May switch to S90V Military, it seems to last a lot longer
Experience is something you get right after you need it :eek:
User avatar
Timbo114
Member
Posts: 150
Joined: Sat Dec 04, 2010 1:04 pm
Location: SW PA

#296

Post by Timbo114 »

Used my FRN Stretch to cut off the tail of my M@glite reflector.
Now my M@G is a 2x18650/Malkoff powered screamer, and my Stretch is still my old faithful friend.
Ghost
Member
Posts: 37
Joined: Tue Mar 13, 2012 7:41 pm
Location: Sweden

#297

Post by Ghost »

Used my Dragonfly2 to pop off a bottle cap from a bottle of cider. :)
Finedges
Member
Posts: 21
Joined: Tue Sep 29, 2009 7:00 am

#298

Post by Finedges »

Finedges
Member
Posts: 21
Joined: Tue Sep 29, 2009 7:00 am

#299

Post by Finedges »

Image
rnbtexas
Member
Posts: 111
Joined: Thu Apr 19, 2012 10:51 am
Location: Denver, CO

#300

Post by rnbtexas »

I used mine to open some letters. I looked over at my wife and she asked me if I needed such a big knife to open the envelope? I tried to use that as a reason to buy the Native5 on ebay that I want.
Post Reply