Native 5 torn apart...

Discuss Spyderco's products and history.
JT
Member
Posts: 847
Joined: Sat Jul 28, 2007 3:10 pm
Location: Finland

Native 5 torn apart...

#1

Post by JT »

There's a thread where other users are discussing Native 5 stiffness.
Here's my take on it.
Got mine a few days ago. Mine was stiff too when opening, but after flicking it, it got better. The opening hole was sanded waaaay too smooth, I couldn't get a grip, you know what i mean. Had to use a small round diamond file to make the hole sharp again.

Then I decided to take it apart, (avoiding warranty, yes i know. I do take many of my users apart, just for the heck of it, and to polish the moving parts etc. So far I've got them all back together, and fully functional too :D . ), to see if there was something wrong with it. Nope, nothing wrong. I guess the stiffness has something to do with the self-closing feature, the backspring is really heavy duty, and it's a bit different than say on a Delica. Also, there was plenty, and I mean plenty of lube used from the factory. I guess they've noticed the stiffness too.

As I had the knife all butchered, I took the time and polished every part that I could see making a difference, and put it back together. It opens and closes smoothly now, but it still is by no means a light flicker.

All and all, I like the Native 5; small, and plenty strong. Hefty. Me likey.



anyways, here's some pics for your viewing pleasure, I olny had my mobile phone at hand so the pics are bit crappy. But at least you can see the inners of the thing, without having to butcher yours


Image

Image

Image

Image

Image

Image

Image

Image
The Cult Of The Curved Ones-C.O.T.C.O.
JT
Member
Posts: 847
Joined: Sat Jul 28, 2007 3:10 pm
Location: Finland

#2

Post by JT »

comparison shots:
Image

Image

Image
The Cult Of The Curved Ones-C.O.T.C.O.
User avatar
TheMelonPopper
Member
Posts: 60
Joined: Mon Feb 07, 2011 8:53 pm
Location: SE Minnesota

#3

Post by TheMelonPopper »

Lets see more of that manix! What did you do to it? :eek:
Two is one, one is none.
JT
Member
Posts: 847
Joined: Sat Jul 28, 2007 3:10 pm
Location: Finland

#4

Post by JT »

TheMelonPopper wrote:Lets see more of that manix! What did you do to it? :eek:
Check out page six of "my precious". I wanted a Micro-Manix, but since Eric still isn't making one, I had to do it myself :D :D

http://www.spyderco.com/forums/showthre ... 690&page=6
The Cult Of The Curved Ones-C.O.T.C.O.
enduraguy
Member
Posts: 683
Joined: Sun Nov 26, 2006 9:38 pm

#5

Post by enduraguy »

Take em all apart throw the parts into a bucket, shake well, then put em back together! 5 minutes! ;)
User avatar
DCDesigns
Member
Posts: 1015
Joined: Fri Aug 05, 2011 5:50 pm
Location: ATL, Ga.
Contact:

#6

Post by DCDesigns »

****, spyderco really knows what they are doing with skeletonized liners! they are barely there!
User avatar
Waco
Member
Posts: 561
Joined: Tue Oct 21, 2008 6:48 pm

#7

Post by Waco »

Mine seemed to open and close perfectly out of the box.
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#8

Post by Evil D »

When they say "skeletonized liners", they're not joking.
All SE all the time since 2017
~David
User avatar
D1omedes
Member
Posts: 1279
Joined: Sat Aug 22, 2009 8:54 pm
Location: Houston, Texas, USA

#9

Post by D1omedes »

Just curious - how do you polish the internals?
jossta
Member
Posts: 1415
Joined: Tue Oct 21, 2008 9:50 am

#10

Post by jossta »

That version of the Manix should be production.
Gollum
Member
Posts: 479
Joined: Wed Jun 07, 2006 1:49 pm
Location: Northern Ky

#11

Post by Gollum »

Dates on the blade now?
Intentionally Left Blank
User avatar
Donut
Member
Posts: 9569
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

#12

Post by Donut »

Thanks a lot for these pictures, very nice work.

That rounded corner suggests to me that it wouldn't snap into place as loudly, but peoples' descriptions of the Native suggest that it does snap into place loud.
Gollum wrote:Dates on the blade now?
Dates on the blade always, but in a spot that you can only see if you disassemble the knife.
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!
User avatar
sal
Member
Posts: 17047
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

#13

Post by sal »

Nice pics JT,

You're showing off all of our secrets :eek:

I'm sure any of you engineers out there can appreciate what our engineers have done.

sal
Gollum
Member
Posts: 479
Joined: Wed Jun 07, 2006 1:49 pm
Location: Northern Ky

#14

Post by Gollum »

Donut wrote:
Dates on the blade always, but in a spot that you can only see if you disassemble the knife.
Delica, Endura's, Military's taken apart- I've never seen a date on a blade. :confused:
Intentionally Left Blank
JT
Member
Posts: 847
Joined: Sat Jul 28, 2007 3:10 pm
Location: Finland

#15

Post by JT »

sal wrote:Nice pics JT,

You're showing off all of our secrets :eek:

I'm sure any of you engineers out there can appreciate what our engineers have done.

sal
Sal,
If you want me to remove the pics, I’ll do that in a hearbeat.

I thought of this a bit before posting, but I figured, that if someone wants to find out the secrets, they’ll just go out and buy one, and do some reverse engineering.

I’m no engineer, but I can see what makes the blade do it’s thing, the self-closing. Simple, yet genious.Not that it's simple to do so, that it works. I bet that it took time and effort to get it right. But you did it. My hat’s off to the Spyderco crew, this is why you guys are on top of the game, always re-newing, improving, and doing little, subtle changes for better. You guys Rock!
The Cult Of The Curved Ones-C.O.T.C.O.
User avatar
1623
Member
Posts: 810
Joined: Fri Jun 17, 2011 6:38 am
Location: New Hampshire

#16

Post by 1623 »

Some tight tolerances there between the tang and the lock bar. Makes me appreciate the effort that goes into designing and fabricating even more.
-Jodi

It's not just in my head, it's in my heart.
User avatar
sal
Member
Posts: 17047
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

#17

Post by sal »

Hi JT,

The pics are fine, I'm just teasing. I think it's a good thing for knife afi's to know what's going on in their world of knives.

sal
User avatar
Waco
Member
Posts: 561
Joined: Tue Oct 21, 2008 6:48 pm

#18

Post by Waco »

sal wrote: I'm sure any of you engineers out there can appreciate what our engineers have done.

sal
I do. :D
User avatar
Wolverine666
Member
Posts: 488
Joined: Fri Apr 08, 2011 10:27 am
Location: Massachusetts

#19

Post by Wolverine666 »

JT , those pics of the Native5's "internal organs" are great. It's interesting to see how everything works in my (current) favorite EDC. Yes , the engineering wizards at Spyderco have (IMO) outdone themselves yet again. . They are the masters of their craft and have made it into an art form. Spyderco 4 eva !!!
JT
Member
Posts: 847
Joined: Sat Jul 28, 2007 3:10 pm
Location: Finland

#20

Post by JT »

sal wrote:Hi JT,

The pics are fine, I'm just teasing. I think it's a good thing for knife afi's to know what's going on in their world of knives.

sal
Phew! :eek: you had me there for a while Sal.

check your e-mail please, I allready wrote to you conserning the matter.
The Cult Of The Curved Ones-C.O.T.C.O.
Post Reply