Your pick for the most versatile Spyder folder?
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Stretch, it's never let me down yet.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
-
- Member
- Posts: 1640
- Joined: Tue Sep 16, 2008 2:21 pm
- Location: SoCal, behind the Orange Curtain
Para 2 or Manix 2
___________________________________________
2011: G10 Dragonfly ^ Breeden Rescue ^ Bug ^ Honeybee ^ Centofante 3 ^ Woodcraft Mule ^SFO Visit Buys = Frn Stretch & Native 4 CF!! ^ Salt 1 ^ Burgundy Calypso ZDP-189 ^ Walker Blue Almite ^ Native 5 ^ Squeak ^ Chaparral ^ Urban Olive Green ^ STREET BEAT!!...
2012: Caly Jr (vintage/NIB!), SS Navigator-fave LBK of all time, Jester, Orange Dodo, CS Orange PM2,Techno, Bradley! AIR!!
2011: G10 Dragonfly ^ Breeden Rescue ^ Bug ^ Honeybee ^ Centofante 3 ^ Woodcraft Mule ^SFO Visit Buys = Frn Stretch & Native 4 CF!! ^ Salt 1 ^ Burgundy Calypso ZDP-189 ^ Walker Blue Almite ^ Native 5 ^ Squeak ^ Chaparral ^ Urban Olive Green ^ STREET BEAT!!...
2012: Caly Jr (vintage/NIB!), SS Navigator-fave LBK of all time, Jester, Orange Dodo, CS Orange PM2,Techno, Bradley! AIR!!
I EDC my Stretch CF and it does a great job at pretty much any task, but I'd have to say the top position for versatility goes to the Endura 4 CE. The spydie edge section is great for twine, rope, para cord, vines, weeds, small branches, and plastic ties, while the plain edge slices BBQ ribs, cake, veggies, cardboard, etc.
:spyder:: Advocate, Slysz Bowie Ti, Southard Black Blade, Stretch Carbon Fiber w/ZDP-189, Fluted Ti Native5, Terzuola Starmate, Terzuola SLIPIT, Leaf Storm, Gayle Bradley, Roadie, Chaparral CF, Chaparral Ti Stealth, Des Horn, Stretch FRN (Blue) ZDP-189, Centofante Memory, Military Black Blade CE, Delica4 FRN CE, Endura4 FRN Black Blade CE, Assist Orange FRN, Manbug ZDP-189, Ladybug 3 FRN SE, Delica4 Blue NLEOMF, Moran Drop Point BB, et al. :spyder: Spydie Fanatic #179 :spyder:
And that is my 100th post on the forum :D !
I vote for the Paramilitary 2.
The Full flat gring, the finger choil, fast deployment, blade shape and belly make this knife for me the most versatile knife for cutting shores!
I vote for the Paramilitary 2.
The Full flat gring, the finger choil, fast deployment, blade shape and belly make this knife for me the most versatile knife for cutting shores!
Michael
[CENTER]-. . ...- . .-. .-- .. - .... --- ..- - -- -.-- ... .--. -.-- -.. . .-. -.-. ---[/CENTER]
[CENTER]:spyder:“Simplicity is the key to brilliance”:spyder:[/CENTER]
[CENTER]-. . ...- . .-. .-- .. - .... --- ..- - -- -.-- ... .--. -.-- -.. . .-. -.-. ---[/CENTER]
[CENTER]:spyder:“Simplicity is the key to brilliance”:spyder:[/CENTER]
- jackknifeh
- Member
- Posts: 8412
- Joined: Fri Jul 09, 2010 6:01 am
- Location: Florida panhandle
With what I own now versatility = Stretch (blue). I have a Manix 2 on order and have high hopes for it.
I noticed that lots of people like the para-military for versatility. This model may move up a rung or two on my to-get ladder. I have faith in the opinions of people here when it comes to the use for knives.
Jack
I noticed that lots of people like the para-military for versatility. This model may move up a rung or two on my to-get ladder. I have faith in the opinions of people here when it comes to the use for knives.
Jack
- The Mastiff
- Member
- Posts: 5951
- Joined: Sun Jun 04, 2006 2:53 am
- Location: raleigh nc
Endura or Delica.
"A Mastiff is to a dog what a Lion is to a housecat. He stands alone and all others sink before him. His courage does not exceed temper and generosity, and in attachment he equals the kindest of his race" Cynographia Britannic 1800
"Unless you're the lead dog the view is pretty much gonna stay the same!"
"Unless you're the lead dog the view is pretty much gonna stay the same!"
Well, if you do not mind abusing and potentially destroying the knife, I would say that my Adventura is the most versatile. I carried and used that thing before I developed a proper respect for knives.
the swedge on the top of the blade makes a very good flat screw driver, but this use will bend the tip (and did).
The slots in the blade make for great wire breakers.
The recurve blade allows for some pretty hard cutting, and the VG-10 held up to some horrendous cuts (wire, aluminum sheeting, you name it).
The SS handles made for a reasonable make-shift hammer for driving small brads for assembling frames.
The interesting and slim design also made for a reasonable dress/office knife. I received many positive comments regarding this knife.
Yeah, that knife served me quite well, and I still have it. It performed a LOT of tasks and while the tip is bent, I never really damaged the knife otherwise.
I think many knives can be quite versatile if you are creative and willing to risk everything to get the job done...not that I think it is a good idea, just saying that they are all pretty versatile if you are ignorant and creative enough
I have retired it now. I will hopefully always have it...some day perhaps I will buy another Adventura that someone choose not to abuse.
the swedge on the top of the blade makes a very good flat screw driver, but this use will bend the tip (and did).
The slots in the blade make for great wire breakers.
The recurve blade allows for some pretty hard cutting, and the VG-10 held up to some horrendous cuts (wire, aluminum sheeting, you name it).
The SS handles made for a reasonable make-shift hammer for driving small brads for assembling frames.
The interesting and slim design also made for a reasonable dress/office knife. I received many positive comments regarding this knife.
Yeah, that knife served me quite well, and I still have it. It performed a LOT of tasks and while the tip is bent, I never really damaged the knife otherwise.
I think many knives can be quite versatile if you are creative and willing to risk everything to get the job done...not that I think it is a good idea, just saying that they are all pretty versatile if you are ignorant and creative enough
I have retired it now. I will hopefully always have it...some day perhaps I will buy another Adventura that someone choose not to abuse.
Thanks,
Ken (my real name)
...learning something new all the time.
Ken (my real name)
...learning something new all the time.
C-44 big Dyad owns my heart
On this one I'll have to go with the original big C-44 Dyad model. With 2 full sized blades ( one SE and one PE) you simply have the best of all possible scenerios which Spyderco offers. I'm truly surprised that there hasn't been a huge outcry to bring back the original C-44 Dyad in one of the newer/super steels.
Now just for a small to mid sized EDC I can't find any fault with my old Burgundy, ZDP-189 Caly Jr. which I've carried off and on ever since it's inception in 2005.
I think it would be more fair to say which Spyderco model would not be ideal as a great all around EDC blade. In that case it just boils down to what a guy or gal feels best with. I've also had great luck with the Zowada and the JD Smith models as well.
Now just for a small to mid sized EDC I can't find any fault with my old Burgundy, ZDP-189 Caly Jr. which I've carried off and on ever since it's inception in 2005.
I think it would be more fair to say which Spyderco model would not be ideal as a great all around EDC blade. In that case it just boils down to what a guy or gal feels best with. I've also had great luck with the Zowada and the JD Smith models as well.
Long Live the SPYDEREDGE Spyderco Hawkbills RULE!!
- jackknifeh
- Member
- Posts: 8412
- Joined: Fri Jul 09, 2010 6:01 am
- Location: Florida panhandle
I've wondered the same thing about the Dyad knives. Here is what I think (I'm sure everyone cares :rolleyes :) . People either love or hate serrated edges for whatever reason. So when they spend money for a knife with both it's like half the money is going for something they don't care for anyway. Or maybe it's the plain edge that someone either loves or hates. This is kind of a far fetched theory but as far as versatility in knives go both type blades would cover lots of bases. The combo edge is meant to do this but IMHO a combo edge takes away from the features of an edge type more than what it gives in relation to an edge type. The SE portion of a CE takes away good PE space and the PE portion takes away good SE space. I like a blade that is either one or the other and the Dyad knives satisfy this desire. I do have the Byrd Wings and love it but it is too big for an EDC knife. Also, I'm not a fan of SEs for EDC but the Wings is on my tool belt and there is no telling what you are going to come across when wearing a tool belt. Tool belts open up opportunities. Try wearing a tool belt to a club one night. You'll get lots of reactions from the ladies. :D You probably will go home alone though.JD Spydo wrote:On this one I'll have to go with the original big C-44 Dyad model. With 2 full sized blades ( one SE and one PE) you simply have the best of all possible scenerios which Spyderco offers. I'm truly surprised that there hasn't been a huge outcry to bring back the original C-44 Dyad in one of the newer/super steels.
Now just for a small to mid sized EDC I can't find any fault with my old Burgundy, ZDP-189 Caly Jr. which I've carried off and on ever since it's inception in 2005.
I think it would be more fair to say which Spyderco model would not be ideal as a great all around EDC blade. In that case it just boils down to what a guy or gal feels best with. I've also had great luck with the Zowada and the JD Smith models as well.
Jack