My only problem with my spyderco knives

Discuss Spyderco's products and history.
Mike V.
Member
Posts: 27
Joined: Fri Sep 24, 2004 10:33 am
Location: Fairview Heights, IL USA
Contact:

My only problem with my spyderco knives

#1

Post by Mike V. »

My only problem I have with my spyderco's is choosing which one to carry. I work in an office/technical environment which cuts it down a bit but there are still lots of choices. I usually opt for the Michael Walker half serrated. Very light, certainly can handle anything I might come up against. The even smaller Dragonfly would also suffice. Then theres the the Calypso Jr. with Micarta, the Delica, the standard G10. Just another of those tough decisions I have to make on a daily basis. I am sure there are others of you with the same dilema.

Mike
Blades
Member
Posts: 1926
Joined: Fri Sep 24, 2004 10:33 am
Location: Fayetteville, NC USA

#2

Post by Blades »

Yeah, but what a good problem to have! <img src="smile.gif" width=15 height=15 align=middle>
Also, welcome to the Spydie forums.


Blades
knifenerd
Member
Posts: 43
Joined: Fri Sep 24, 2004 10:33 am
Location: NY USA

#3

Post by knifenerd »

How about the "Toad"? Tiny enough to be considered non-threatening even by the most politically correct office employees.

Dick
SharpeML
Member
Posts: 2
Joined: Fri Sep 24, 2004 10:33 am
Location: USA

#4

Post by SharpeML »

Can't go wrong with a Cricket. Even better if you can find one with the aluminum handleds.
User avatar
vampyrewolf
Member
Posts: 7486
Joined: Fri Sep 24, 2004 10:33 am
Location: Saskatoon, Saskatchewan, Canada

#5

Post by vampyrewolf »

Yep, Cricket(almite, fully serated) has no problems at work or school. I also carry a LadyBug(black, 50/50) without problems. Both shaving sharp, although the cricket isn't too fun to shave with <img src="smile.gif" width=15 height=15 align=middle>)
ftkinney
Member
Posts: 527
Joined: Fri Sep 24, 2004 10:33 am
Location: Texan living in New Jersey USA

#6

Post by ftkinney »

maybe a harpy if you what to spice it up.
charlie
Member
Posts: 248
Joined: Fri Sep 24, 2004 10:33 am
Location: Santa Maria, CA USA

#7

Post by charlie »

Mike V., You don't have a real problem, it's the guy who can only afford one or two Spycerco knives that has a problem! If you make a list of the knives you own I will be glad to make a daily carry list for you for the month of June. If you donate one of your knives to someone who needs a Spyderco and responds to this post your generosity will be payment enough.
clipiteer
Member
Posts: 161
Joined: Fri Sep 24, 2004 10:33 am
Location: South Carolina

#8

Post by clipiteer »

Have you considered a Co-Pilot with a stainless steel handle? It should handle most tasks without scaring anyone.
Walt2
Member
Posts: 8
Joined: Fri Sep 24, 2004 10:33 am
Location: So. Tex. USA

#9

Post by Walt2 »

I will stick with my new style Howard Viele. After over 50 years of using and sharpening knives I have found a steel (VG10) that really suits my needs.
Jeff/1911
Member
Posts: 1390
Joined: Fri Sep 24, 2004 10:33 am
Location: Western Canada

#10

Post by Jeff/1911 »

Mike V.

I can certainly identify with you. So far for me, it's only between my Calypso, Calypso Jr. (both Micarta) and my G-10 Rookie. It won't be so relatively simple for long... Have you considered a "rotation" schedule?

Of mine; the Rookie is the smallest but either of the Calypso's ride so completely low profile & flat that they often get the nod for my workday choice.

Cheers, Jeff/1911.
User avatar
sal
Member
Posts: 17029
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

#11

Post by sal »

Hi Mike, SharpeML, Clipiteer & Walt. Welcome to the Spyderco forum.

It is a tough problem. Yesterday, I had to carry the Boye Dendritic Cobalt Military prototype and today it's the Lil' Temperance prototype. It's a tough job.

sal
SharpeML
Member
Posts: 2
Joined: Fri Sep 24, 2004 10:33 am
Location: USA

#12

Post by SharpeML »

Hey! Sal

A big shot executive like yourself can't be bothered with choosing which prototype to carry each day. So, I'm sure I could sacrifice a little pocket space to help you out!

Keep up the great work a Spyderco!

Love them Crickets!! <img src="smile.gif" width=15 height=15 align=middle>
phwl
Member
Posts: 11
Joined: Fri Sep 24, 2004 10:33 am

#13

Post by phwl »

I have the same problem. I've got the dyad-jr, navigator, full size wegner, ss dragonfly, ladybug and the calypso jr ltwgt. I find that around the city, I carry the ss dragonfly most of the time because the blade is long enough for most jobs and it looks the most non-threatening.
User avatar
sal
Member
Posts: 17029
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

#14

Post by sal »

Hi Sharpe. Thanx for the kind words. Funny, when I look in the mirror, I don't see a "big shot executive", just another knife guy.

sal
Tom Percy
Member
Posts: 151
Joined: Fri Sep 24, 2004 10:33 am
Location: Canada

#15

Post by Tom Percy »

I don't have a problem deciding what TO carry, I have more a problem deciding what NOT to carry <img src="wink.gif" width=15 height=15 align=middle>
alex_111
Member
Posts: 7
Joined: Fri Sep 24, 2004 10:33 am
Location: maryland USA

#16

Post by alex_111 »

you decide which **ONE** knife to carry? geez, that'd be impossible for me... <img src="wink.gif" width=15 height=15 align=middle>
aleX.

"i flip you... i flip you for real..."
Zhang Fei
Member
Posts: 10
Joined: Fri Sep 24, 2004 10:33 am

#17

Post by Zhang Fei »

The Baby Jess Horn is another excellent choice and my current favorite after I broke the pocket clip on my Dragonfly. Sitting in a boring presentation yesterday, my boss reached over and pulled the baby Jess Horn out of my pocket. Figured out how to open it up then stabbed himself good in his finger with the super sharp needle-tip when he was "testing" the edge. Looked over at me. Shrugged my shoulders - "It's sharp. Watch out" Then he proceeded to stab the stuffing in his chair. Handed it back to me and said "That's dangerous." When asked why, he said because it's too sharp. Go figure - IT'S A KNIFE!!!

ZF

alex_111 - nice sig line. Laughed my a** off. Best movie, favorite character. Except of course, for Mr. Soze.
Tom Percy
Member
Posts: 151
Joined: Fri Sep 24, 2004 10:33 am
Location: Canada

#18

Post by Tom Percy »

Now alex_111, I did not say that I <i>only </i> carry 1 <img src="smile.gif" width=15 height=15 align=middle>
The Stare
Member
Posts: 359
Joined: Fri Sep 24, 2004 10:33 am
Location: West of Big Sky

#19

Post by The Stare »

I'm having similar problems with the decision for my left -- back up -- side front pocket carry.

When I first got the Goddard Ltwt, I assumed that was it, and I'd carry it forever. Then, I got a Native and Calypso Jr. ALmost immediately, the Native went into the pocket and the Goddard back into its box. I can't help my feeling that the Native is one of the most versatile and useful knife designs I've seen. I know it wouldn't be as good a self-defense weapon, but this is the backup, and the shorter blade of the Native is more useful than the nearly 4" blade of the Goddard.

I keep playing with the Calypso, but haven't yet gotten it into my pocket. Appearance-wise, am sure it is the best of the 3. Very non-threatening look, IMO. And, of course, so many rave about its cutting ability, and like teh VG-10 steel so much.

Frankly, the Calypso Jr has a sort of delicate feeling about it. I'd really like to know how sturdy it is perceived to be bythosee who carry it regularly. And, if possible, compared to the Native for EDC. Both the knives have excellent designs, with a choil/ricasso that will come back and not cut you, should the lock fail. The Native's handle seems longer, and it feels much more sturdy. Sure would like to know if I could carry the Calypso with a feeling of confidence, not worried it might break in some way or another. (Forgot to say that I have a great knack for breaking things.)

Though the Native's blades is shorter than the Goddard's, it still feels to me that it has defense potential, should the need arise. I feel I could thrust strongly, without worry of breaking the blade. I fear, thus far, that a strong stab with the Calypso Jr could easily result in breaking the blade, and then I'd be out of knives.

Some help, please!! Thanks,


Stare
Tom Percy
Member
Posts: 151
Joined: Fri Sep 24, 2004 10:33 am
Location: Canada

#20

Post by Tom Percy »

The Stare,
I've found my Calypso Jr. is quite sturdy, but I save it, or my Calypso, for dress use. The Micarta handles are really nice, and It bothers me when I scratch them.
I stick with FRN, G10, and Stainless for EDC.
Post Reply