The screw kit box looks cool!Ramonade wrote: ↑Mon Jan 29, 2024 5:36 amNo worries, I went crazy on screws personallyspinynorman wrote: ↑Sun Jan 28, 2024 5:26 pmThank you so much for the info Ramonade, I think I'll start looking for some longer M2 screws!Ramonade wrote: ↑Sat Jan 27, 2024 8:30 pm
Old but useful, I've used it many times before kindof buying every thread options for imperial and metric system
Taïchung uses M2 for clip screws most of the time, sometimes M2.3. I don't have the Carribean to check but since you've said 0.76", it's definitely M2.
I've created a kit with every screw size Spyderco uses, from Golden, Seki, China and Taïchung. I just can't find any 6-32 screws with the right countersunk head .
Cheers, Doug
Screw Sizes / please post if you have them !
Re: Screw Sizes / please post if you have them !
Re: Screw Sizes / please post if you have them !
It's a 100° taper, not that knowing that actually makes finding them any easier.
Currently testing: M398, D3, SLD-Magic
Favorites: 10V, s90v
Wishlist: S290, Vancron, S125V, K890
18 Spydies, 15 steels
13 Maxace, 9 steels
https://instagram.com/cnyknifenut
https://youtube.com/@CNYKnifeNerd
Favorites: 10V, s90v
Wishlist: S290, Vancron, S125V, K890
18 Spydies, 15 steels
13 Maxace, 9 steels
https://instagram.com/cnyknifenut
https://youtube.com/@CNYKnifeNerd
Re: Screw Sizes / please post if you have them !
100° taper and pretty small head diameter compared to what I've been able to find !
That might help me find longer screws for when I make thicker scales and still want the heads to be flush though, thanks !
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Screw Sizes / please post if you have them !
McMaster Carr has them and for that matter most screws.
Flash Batch request: Flat Iron Salt (CE w/ yellow FRN)
New knife request: Police 4 Salt!!!
“Don’t be so open minded that your brain falls out”
New knife request: Police 4 Salt!!!
“Don’t be so open minded that your brain falls out”
Re: Screw Sizes / please post if you have them !
Spyderco Military 2 screw specs, anybody?
Re: Screw Sizes / please post if you have them !
Checking RN
Results for Military 2 :
- Pivot is T15 with 8-32 threads
- Body are T8 with 4-40 threads (like on Manix, PM2 and Para 3)
And to Dodge : Yeah I've been redirected to their website many times, but I've tried to not buy from the USA just because of the crazy shipping fees on most websites. I might end up doing it anyways just for the 100° taper !
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Screw Sizes / please post if you have them !
Thank you RamonadeRamonade wrote: ↑Mon Mar 04, 2024 4:02 amChecking RN
Results for Military 2 :
- Pivot is T15 with 8-32 threads
- Body are T8 with 4-40 threads (like on Manix, PM2 and Para 3)
And to Dodge : Yeah I've been redirected to their website many times, but I've tried to not buy from the USA just because of the crazy shipping fees on most websites. I might end up doing it anyways just for the 100° taper !
So, the pivot screws are just like the Spyderco Military ones, except the head is flat?
And the body screws are exactly like the Paramilitary 2 ones?
The pocket clip itself looks like it's the same as the Paramilitary 2 one as well
Re: Screw Sizes / please post if you have them !
That's it yeah, it's countersunk heads for the pivot but same thread :) and exact same screws for the body and clip than the PM2 exactly.AlexRus wrote: ↑Mon Mar 04, 2024 5:48 amThank you RamonadeRamonade wrote: ↑Mon Mar 04, 2024 4:02 amChecking RN
Results for Military 2 :
- Pivot is T15 with 8-32 threads
- Body are T8 with 4-40 threads (like on Manix, PM2 and Para 3)
And to Dodge : Yeah I've been redirected to their website many times, but I've tried to not buy from the USA just because of the crazy shipping fees on most websites. I might end up doing it anyways just for the 100° taper !
So, the pivot screws are just like the Spyderco Military ones, except the head is flat?
And the body screws are exactly like the Paramilitary 2 ones?
The pocket clip itself looks like it's the same as the Paramilitary 2 one as well
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
- adancingmonkey
- Member
- Posts: 307
- Joined: Tue Jan 28, 2014 11:54 pm
Re: Screw Sizes / please post if you have them !
Walker - C22CF sprint run screw sizes?
And lil' nilakka screw size for the pocket clip?
And lil' nilakka screw size for the pocket clip?
Current favorite: Manix 2 with carbon fiber scales and cru-ware.
-
- Member
- Posts: 1
- Joined: Fri May 10, 2024 2:58 pm
Re: Screw Sizes / please post if you have them !
Im looking for 4 inch length, 6/32 thread, T15 Torx Pan head or button screw
any idea where I could find them?
any idea where I could find them?
-
- Member
- Posts: 3013
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Longmont, CO USA
- Contact:
Re: Screw Sizes / please post if you have them !
Dear joeventura:
Welcome to the Spyderco Forum.
Stay safe,
Mike
Welcome to the Spyderco Forum.
Stay safe,
Mike