I keep forgetting about those Hap40 exclusives. They look beautiful. I like the new black pakkawood they are doing , but would prefer the laminated Hap40. They seem to go on sale around Black Friday. I need to keep an eye out. Maybe they will do a Stretch XL.
What’s your favourite exclusive for future models?
Re: What’s your favourite exclusive for future models?
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
Re: What’s your favourite exclusive for future models?
Even though I doubt we'll see it, I would like a Stretch 2 drop point in that configuration. I've almost bought the endela a few times, but my Delica is so good.
-
- Member
- Posts: 3959
- Joined: Mon Jun 13, 2022 8:05 am
- Location: Atlanta,Georgia USA Earth
Re: What’s your favourite exclusive for future models?
Cruwear/purple…Cruwear/green
Re: What’s your favourite exclusive for future models?
I'm certain I saw someone RIT dye the mahogany pakkawood black recently. I can't remember where unfortunately.
Re: What’s your favourite exclusive for future models?
Heinnie Haynes Red G10.
Unfortunately they only come up every other year in Spyderco form.
Unfortunately they only come up every other year in Spyderco form.
- Manixguy@1994
- Member
- Posts: 12640
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: What’s your favourite exclusive for future models?
I went with DLT even though I don’t have the purple , I do like the Endela Green Cruwear and hope to see an Endura . SNK is my second . MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
- Manixguy@1994
- Member
- Posts: 12640
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: What’s your favourite exclusive for future models?
Oops,! Double post
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: What’s your favourite exclusive for future models?
K390, ranger green, G10, Golden models. Native, Shaman, Military, UKPK, Manix; I'm not picky.
Probably not going to happen, but that would do it for me.
Probably not going to happen, but that would do it for me.
Peter
-
- Member
- Posts: 6910
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: What’s your favourite exclusive for future models?
I had to go "Other" since SFO CF/S90V isn't on the list. For me, it's all about the model anyway. Mostly I find the Exclusives annoying.
Re: What’s your favourite exclusive for future models?
Most of my exclusives are from CutleryShoppe, DLT and St. Nick's, as they are among the handful of US dealers that ship to my country.
Would love to see an OD green Native 5 lightweight in Cruwear from DLT, as well as an S90V PM2 wharnie from CutleryShoppe.
Would love to see an OD green Native 5 lightweight in Cruwear from DLT, as well as an S90V PM2 wharnie from CutleryShoppe.
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: What’s your favourite exclusive for future models?
I said DLT Purple/Cruwear. I'd love to see the Seki models in this combo. The distributor exclusive Grey Cruwear Delica is also one I would love to see get expanded upon, but that was the only one so I dont see it happening. DLT's OD Green/TiCN Cruwear is also a winner. I'd love a Delica Wharie in all three of these!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
- WilliamMunny
- Member
- Posts: 1183
- Joined: Fri Jan 29, 2021 1:20 pm
Re: What’s your favourite exclusive for future models?
It was not an option, but I am a big fan of the REC Scorpion (Tan with 10V).
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
Re: What’s your favourite exclusive for future models?
my favorites (even though i don't have most of them):
ticn with red/black zome (we need a ladybug ladybug, dlt)
ticn with od frn
dlc with od g10
dlc with purple g10
fde pvd with od g10
i really wish spyderco wouldn't lock these down permanently. maybe establish a clause that allows other dealers to use the same color combination with different steels?
ticn with red/black zome (we need a ladybug ladybug, dlt)
ticn with od frn
dlc with od g10
dlc with purple g10
fde pvd with od g10
i really wish spyderco wouldn't lock these down permanently. maybe establish a clause that allows other dealers to use the same color combination with different steels?
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: What’s your favourite exclusive for future models?
I want a SNK Ikuchi
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: What’s your favourite exclusive for future models?
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: What’s your favourite exclusive for future models?
I don't have one of these but I'd like to. I voted SNK and I love the fact they use 4V but I think the tan with 10V would be even better.WilliamMunny wrote: ↑Thu Jan 11, 2024 11:48 amIt was not an option, but I am a big fan of the REC Scorpion (Tan with 10V).
Dan
Re: What’s your favourite exclusive for future models?
Double ooh! That would be quite the combo.
- Al
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Re: What’s your favourite exclusive for future models?
Tough call for me between Rex45 / White and CruWear / Purple. I settled on the latter but I own both (and will probably try to get more in these pairs in the future).
Re: What’s your favourite exclusive for future models?
Tough decision as there are so many good ones!
I went with other - I would like to see someone pick up 4V uncoated.
After that it is a toss-up between cruwear green and cruwear purple as I don’t have any cause they haven’t done models I’m interested in.
Have some in xhp orange, jade M4, and cv20 blue - otherwise they would be on the toss-up list too.
CG
I went with other - I would like to see someone pick up 4V uncoated.
After that it is a toss-up between cruwear green and cruwear purple as I don’t have any cause they haven’t done models I’m interested in.
Have some in xhp orange, jade M4, and cv20 blue - otherwise they would be on the toss-up list too.
CG
So many knives - so little funds!!!
Re: What’s your favourite exclusive for future models?
I like several of the color combos, but I think the SNK DLC 4V with red G10 is awesome. Managed to pick up several of the larger offerings that sold slower. Would like a Police 4.