Spyderco 2023 Lists: Delivered & Upcoming

[RamZar]

It has been 111 days since the following 19 New Models were Announced in Reveal 13 (May 25, 2023) and not yet Delivered:

1. MicroJimbo CPM-S30V Satin Blade Black G-10 C264GP (USA) - Reveal 13 (MAY 2023)
2. MicroJimbo CPM-S30V Black DLC Blade Black G-10 C264GPBK (USA) - Reveal 13 (MAY 2023)
3. Military2 CPM-S30V Satin Blade ComboEdge Black G-10 C36GPS2 (USA) - Reveal 13 (MAY 2023)
4. Military2 CPM-S30V Satin Blade SpyderEdge Black G-10 C36GS2 (USA) - Reveal 13 (MAY 2023)
5. Military2 CPM-S30V Black DLC Blade PlainEdge Black G-10 C36GPBK2 (USA) - Reveal 13 (MAY 2023)
6. Military2 CPM-S30V Black DLC Blade ComboEdge Black G-10 C36GPSBK2 (USA) - Reveal 13 (MAY 2023)
7. Military2 CPM-S30V Black DLC Blade SpyderEdge Black G-10 C36GSBK2 (USA) - Reveal 13 (MAY 2023)
8. Military2 CPM-S30V Satin Blade PlainEdge Digital Camo G-10 C36GPCMO2 (USA) - Reveal 13 (MAY 2023)
9. Military2 CPM-S30V Black DLC Blade PlainEdge Digital Camo G-10 C36GPCMOBK2 (USA) - Reveal 13 (MAY 2023)
10. Native Chief Lightweight CPM-SPY27 Satin Blade Cobalt Blue FRN C244PCBL (USA) - Reveal 13 (MAY 2023)
11. Native Chief Lightweight CTS-BD1N Satin Blade PlainEdge Black FRN C244PBK (USA) - Reveal 13 (MAY 2023)
12. Native Chief Lightweight CTS-BD1N Satin Blade ComboEdge Black FRN C244PSBK (USA) - Reveal 13 (MAY 2023)
13. Native Chief Lightweight CTS-BD1N Satin Blade SpyderEdge Black FRN C244SBK (USA) - Reveal 13 (MAY 2023)
14. Native Chief Lightweight CTS-BD1N Black DLC Blade PlainEdge Black FRN C244PBBK(USA) - Reveal 13 (MAY 2023)
15. Native Chief Lightweight CTS-BD1N Black DLC Blade ComboEdge Black FRN C244PSBBK (USA) - Reveal 13 (MAY 2023)2
16. Native Chief Lightweight CTS-BD1N Black DLC Blade SpyderEdge Black FRN C244SBBK (USA) - Reveal 13 (MAY 2023)
17. Stretch2 XL VG-10 Damascus Blue Nishijin Glass Fiber C258GFBLP Sprint Run (Japan) - Reveal 13 (MAY 2023)
18. Tenacious CPM-M4 PlainEdge Brown G-10 C122GBNM4P (China) - Reveal 13 (MAY 2023)
19. Tenacious CPM-M4 ComboEdge Brown G-10 C122GBNM4PS (China) - Reveal 13 (MAY 2023)

[BeggarSo]

These are the only two on my radar and will likely be the last Spyderco purchase unless they come out in Magnacut then it will be a purchase all over again.

Military2 CPM-S30V Black DLC Blade PlainEdge Black G-10 C36GPBK2 (USA)
Military2 CPM-S30V Black DLC Blade SpyderEdge Black G-10 C36GSBK2 (USA)

If they come out as salt which in my mind equals lightweight in Magnacut then no thanks.

To my mind I do not like the salt series construction even though I own a few Salt series and seeing the PM2 coming out in that construction using Magnacut is not something I want, Yeah I get it corrosion resistance and all that and the continual move towards lightweight construction, I have a few Spyderco in light weight construction and it is just not for me.

I own the REC Wharncliffe PM2"s in the two different steels in Satin as well as DLC these are the best PM2's out of the 20 or so I have purchased. I certainly hope the Military 2 receives a Wharncliffe blade in normal construction as it is now but in Magnacut.

Speaking of Magnacut I have a Chris Reeve large Inkosi Insingo in Magnacut with natural Micarta inlays inbound today, It will be interesting to see how well it works as I already own a Spyderco in Magnacut and a Bark River Knives fixed blade in Magnacut.

Jury is still out on the Spyderco's implementation of Magnacut as the excellent serrations skew perceptions. Looking forward to more of my favorite Spyderco designs in Magnacut for sure, none of them on the list are it though.

[Skywalker]

...

If they come out as salt which in my mind equals lightweight in Magnacut then no thanks.

To my mind I do not like the salt series construction even though I own a few Salt series and seeing the PM2 coming out in that construction using Magnacut is not something I want, Yeah I get it corrosion resistance and all that and the continual move towards lightweight construction, I have a few Spyderco in light weight construction and it is just not for me.

...

The magnacut PM2 is not going to be a lightweight. See the below post from the Amsterdam meet preview; it'll still be G10 scales with a little extra texturing.

The Spyderco Salt series will be expanded with a Para Military 2. There truly will be a Para Military 2 for any occasion I guess, with all the variants we’ve seen so far, and now one for maritime use. This production sample featured black peel-ply G-10 handle scales, finished with a design of bidirectional grooves. According to Eric, the overall plan is to make a Salt version of every knife, made in the US factory. And although it’s hard to make out in these photos, I had a hard time getting a good shot of the engraving, the blade will be made of MagnaCut. The liners and all other hardware were coated black.































Specifications
Closed: 4.82 inch / 122 mm
Overall: 8.24 inch / 209 mm
Blade: 3.42 inch / 87 mm
Edge: 3.04 inch / 77 mm
Thickness: 0.145 inch / 3.7 mm
Steel: CPM MagnaCut
Weight: 3.77 oz / 107 g
Grind: Full-flat
Lock: Compression
Handle: G-10
Carry: Ambi
Clip: 4-position
Origin: USA


I have no information on pricing or release dates.

[vilePossum]

Sigh, still no ukpk in Magnacut...

[BeggarSo]

...

If they come out as salt which in my mind equals lightweight in Magnacut then no thanks.

To my mind I do not like the salt series construction even though I own a few Salt series and seeing the PM2 coming out in that construction using Magnacut is not something I want, Yeah I get it corrosion resistance and all that and the continual move towards lightweight construction, I have a few Spyderco in light weight construction and it is just not for me.

...

The magnacut PM2 is not going to be a lightweight. See the below post from the Amsterdam meet preview; it'll still be G10 scales with a little extra texturing.

The Spyderco Salt series will be expanded with a Para Military 2. There truly will be a Para Military 2 for any occasion I guess, with all the variants we’ve seen so far, and now one for maritime use. This production sample featured black peel-ply G-10 handle scales, finished with a design of bidirectional grooves. According to Eric, the overall plan is to make a Salt version of every knife, made in the US factory. And although it’s hard to make out in these photos, I had a hard time getting a good shot of the engraving, the blade will be made of MagnaCut. The liners and all other hardware were coated black.































Specifications
Closed: 4.82 inch / 122 mm
Overall: 8.24 inch / 209 mm
Blade: 3.42 inch / 87 mm
Edge: 3.04 inch / 77 mm
Thickness: 0.145 inch / 3.7 mm
Steel: CPM MagnaCut
Weight: 3.77 oz / 107 g
Grind: Full-flat
Lock: Compression
Handle: G-10
Carry: Ambi
Clip: 4-position
Origin: USA


I have no information on pricing or release dates.

I must be missing it I do not see G-10 specified anywhere not that is matters the only PM2 I could ever be enticed to buy again would be a Wharncliffe in Magnacut other than that I have collected way too many drop point PM2's over the years in different steel only to come back to S30V as my favorite. I thought it was around 20 but that is what I have in stock if I count the sales over the years it is probably in the neighborhood of 40 but after the Wharncliffe the drop point just does not compare. Rivers edge cutlery still has som in stock last I looked it would be a good move to get on while they are available.

[bbturbodad]

I must be missing it I do not see G-10 specified anywhere...

The post you replied to says: (near the bottom of the post)

Handle: G-10

[weeping minora]

I must be missing it I do not see G-10 specified anywhere...

The post you replied to says: (near the bottom of the post)

Handle: G-10

Not to mention, it has the same peel-ply texturing that Spyderco employs on their G-10. Only difference are the added grooves/routing channels (which looks quite nice, IMO).

Can't wait for the Military 2 in this configuration .

[Dizzysamurai]

I just hope they run the magna at a high HRC.
Also fingers crossed on yellow g10 at release. Ive never seen a yellow pm2 or 3 in my life, not even modded.

[BeggarSo]

Oops G-10 it is.

[Buddafucco]

ParaMilitary2 Emerson Opener Elmax Satin Blade Dark Gray G-10 C81GPGYW2 BladeOps (USA) expected ETA is on or before October 13th, 2023. Preorder starts September 26th, 2023 at 9 AM MST for $184.
https://bladeops.com/spyderco-exclusive ... tin-elmax/

[ABX2011]

I bought the original BladeOps PM2 Emerson S30V on Cyber Monday 2020 for $136! That was a good pick up. Wonder if this one will also be on sale in November...

[BAX229]

I bought the original BladeOps PM2 Emerson S30V on Cyber Monday 2020 for $136! That was a good pick up. Wonder if this one will also be on sale in November...

This one includes the $50 "tip up" clip relocation fee

[Dully]

I am pretty excited for this release. Elmax is one of my favorites and the Emerson wave makes a lot of sense once you put a wise men signet ring on it. I will be doing the same to the matriarch 2. Cheers everyone -Mike

[Buddafucco]

ParaMilitary2 Emerson Opener Elmax Satin Blade Dark Gray G-10 C81GPGYW2 BladeOps (USA) is/was available for preorder at exclusive dealer. Expected shipping ETA is on or before October 13th, 2023.
https://bladeops.com/spyderco-exclusive ... tin-elmax/

[nosuchagency]

not particular fan of wave, but is definitely unique enough to have snagged one regardless.

[resonanzmacher]

ParaMilitary2 Emerson Opener Elmax Satin Blade Dark Gray G-10 C81GPGYW2 BladeOps (USA) is/was available for preorder at exclusive dealer. Expected shipping ETA is on or before October 13th, 2023.
https://bladeops.com/spyderco-exclusive ... tin-elmax/

Hot ****. Two ordered.

Thank you, Sal and gang!

[RamZar]

Native Chief Lightweight is prominent in the September byte 2023 newsletter so it may arrive very soon!





Also, Reveal 14 is Coming Soon!

[weeping minora]

Native Chief Lightweight is prominent in the September byte 2023 newsletter so it may arrive very soon!





Also, Reveal 14 is Coming Soon!

Thanks, RamZar!

Bout dang time we see the Native Chief LW set free!

[vivi]

here's hoping we get blacked out Millie 2's and Chief LW's soon!

[RamZar]

List of Spyderco Reveals and their Release Dates:

• Reveal 13: Thursday, May 25, 2023
• Reveal 12: Friday, January 13, 2023
• Reveal 11:‪ ‬Tuesday, September 27, 2022
• Reveal 10: Wednesday, June 1, 2022
• Reveal 9‪: ‬Tuesday, January 11, 2022
• Reveal 8: Tuesday, May 11, 2021
• Reveal 7: Tuesday, January 19, 2021
• Reveal 6: Wednesday, September 9, 2020
• Reveal 5: Tuesday, May 5, 2020
• Reveal 4: Wednesday, January 15, 2020
• Reveal 3: Monday, September 16, 2019
• Reveal 2: Thursday, May 2, 2019
• Reveal 1: Friday, January 11, 2019