Shaman 15V, Bad QC

Discuss Spyderco's products and history.
User avatar
mongo1958
Member
Posts: 655
Joined: Mon Jan 23, 2023 9:01 pm
Location: Atlanta Ga USA

Re: Shaman 15V, Bad QC

#21

Post by mongo1958 »

WilliamMunny wrote:
Mon Apr 10, 2023 9:42 am
vanka wrote:
Mon Apr 10, 2023 9:23 am
Let's call it factory second. I'll give you 150 for it and i'll cover the shipping to the UK. How about that? :zany
I agree total junk second knife, but so you don't lose too much I will give you $200, just to help you out.

On the more helpful side maybe put some custom wood scales on it and keep it for yourself, be a beautiful knife. If you are looking to sell all three probably not the best place to be posting, pure reselling is not very popular on here, or anywhere for that matter.

You could also return it so someone else could be lucky enough to have the chance to buy it, get your money back at least. Good luck.
Wait, What? I purchased a new Shaman about a month ago for $200 and it is perfect. Who knew? :cheap-sunglasses
Mongo1958
****John3:16****
:bug-red-white Is it true? Is it kind? Is it necessary? :bug-red-white
Para 3 Dark Blue G10 S110V (First Spyderco), PM2 Black G10 S45VN, Manix 2 LW Translucent Blue BD1N, Sage 5 LW S30V, Shaman G10 S30V, Tenacious C122BK SE LW, Native 5 LW SE S35VN, P4SE K390, Delica 4SE K390, Endela SE K390, Caribbean SE LC200N, Dragonfly 2 S30V (wife's first Spydie), Autonomy 2 Black LC200N DLC SE.
User avatar
JSumm
Member
Posts: 5862
Joined: Tue Jan 05, 2021 7:59 pm
Location: North of Atlanta, GA USA

Re: Shaman 15V, Bad QC

#22

Post by JSumm »

Hey Bolster, shoot me a PM of your crap knives. I am an expert on QC issues. I'll take a look at them and give you an expert opinion. If my opinion is bad, I also offer a rehoming service as well that may be of use to you.

Matt, your Kapara may need my rehoming service for problem knives.
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
User avatar
Traditional.Sharpening
Member
Posts: 286
Joined: Thu Mar 02, 2023 12:29 am

Re: Shaman 15V, Bad QC

#23

Post by Traditional.Sharpening »

So how much did this knife sell for after posting this thread? Anybody care to take bets? I'm betting north of three bills... /:)
User avatar
Bolster
Member
Posts: 5676
Joined: Sat Mar 03, 2007 1:27 pm
Location: CalyFRNia

Re: Shaman 15V, Bad QC

#24

Post by Bolster »

JSumm wrote:
Mon Apr 10, 2023 6:30 pm
Hey Bolster, shoot me a PM of your crap knives. I am an expert on QC issues. I'll take a look at them and give you an expert opinion. If my opinion is bad, I also offer a rehoming service as well that may be of use to you.

I would, normally, but I'm kinda busy right now, composing the 37th PM and 23rd email to ZrowsN1s, trying to purchase his crap Kapara from him:

ZrowsN1s wrote:
Mon Apr 10, 2023 4:44 pm
I have a like new Kapara that is total trash.... :rofl
Last edited by Bolster on Mon Apr 10, 2023 8:42 pm, edited 1 time in total.
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
User avatar
JSumm
Member
Posts: 5862
Joined: Tue Jan 05, 2021 7:59 pm
Location: North of Atlanta, GA USA

Re: Shaman 15V, Bad QC

#25

Post by JSumm »

🤣 that is some tenacity!
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
User avatar
Bolster
Member
Posts: 5676
Joined: Sat Mar 03, 2007 1:27 pm
Location: CalyFRNia

Re: Shaman 15V, Bad QC

#26

Post by Bolster »

JSumm wrote:
Mon Apr 10, 2023 8:41 pm
🤣 that is some tenacity!

Wait, he's selling a Tenacity, too?

(With certain combinations of posters, ppphtt goes the thread.)
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
User avatar
JSumm
Member
Posts: 5862
Joined: Tue Jan 05, 2021 7:59 pm
Location: North of Atlanta, GA USA

Re: Shaman 15V, Bad QC

#27

Post by JSumm »

Bolster wrote:
Mon Apr 10, 2023 8:43 pm
JSumm wrote:
Mon Apr 10, 2023 8:41 pm
🤣 that is some tenacity!

Wait, he's selling a Tenacity, too?

(With certain combinations of posters, ppphtt goes the thread.)
You sure are persistent! 🤣
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
User avatar
Bolster
Member
Posts: 5676
Joined: Sat Mar 03, 2007 1:27 pm
Location: CalyFRNia

Re: Shaman 15V, Bad QC

#28

Post by Bolster »

JSumm wrote:
Mon Apr 10, 2023 8:45 pm
Bolster wrote:
Mon Apr 10, 2023 8:43 pm
JSumm wrote:
Mon Apr 10, 2023 8:41 pm
🤣 that is some tenacity!

Wait, he's selling a Tenacity, too?

(With certain combinations of posters, ppphtt goes the thread.)
You sure are persistent! 🤣

...and there goes the thread, folks... 🤣
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
User avatar
SpyderPhreak
Member
Posts: 214
Joined: Thu Aug 04, 2016 9:29 am
Location: More than a mile high, CO!

Re: Shaman 15V, Bad QC

#29

Post by SpyderPhreak »

spydiefan01 wrote:
Sat Apr 08, 2023 2:06 pm
I have 3 of these knives and only this one looks like this, horrible QC, I cant even sell this


Image
3??? ',:-| Flipper. :cussing I hope that knife bites you and you have to keep it! :respect
"Engineers don't idle well."

Thank you to our Veterans!
User avatar
mongo1958
Member
Posts: 655
Joined: Mon Jan 23, 2023 9:01 pm
Location: Atlanta Ga USA

Re: Shaman 15V, Bad QC

#30

Post by mongo1958 »

billdoier72 wrote:
Mon Apr 10, 2023 7:21 am
That photo quality is Sasquatch/UFO level resolution so it's really hard to discern any defects.
Now that was funny!🤣
Mongo1958
****John3:16****
:bug-red-white Is it true? Is it kind? Is it necessary? :bug-red-white
Para 3 Dark Blue G10 S110V (First Spyderco), PM2 Black G10 S45VN, Manix 2 LW Translucent Blue BD1N, Sage 5 LW S30V, Shaman G10 S30V, Tenacious C122BK SE LW, Native 5 LW SE S35VN, P4SE K390, Delica 4SE K390, Endela SE K390, Caribbean SE LC200N, Dragonfly 2 S30V (wife's first Spydie), Autonomy 2 Black LC200N DLC SE.
TomahawkT10
Member
Posts: 37
Joined: Thu Jul 28, 2022 3:58 pm

Re: Shaman 15V, Bad QC

#31

Post by TomahawkT10 »

Whole thread should be deleted. Flipper and a post with no details. He doesn't want help or advice, he wants to trash Spyderco while using them to make money.
Stagg3r
Member
Posts: 7
Joined: Sat Jan 14, 2023 12:21 pm

Re: Shaman 15V, Bad QC

#32

Post by Stagg3r »

And here I haven't been able to get one. Go figure.
User avatar
Mushroom
Member
Posts: 7371
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Shaman 15V, Bad QC

#33

Post by Mushroom »

Lots of unnecessary anger towards the OP.

Owning three of these knives does not automatically make anyone a flipper. Could very well be a collector or someone buying pre-need replacements. Maybe wants to keep one as a safe queen, one as a user, and re-sell the last one for a bit of a profit. (Because he can.)

Regardless of what his plans are for the knives, that shouldn't matter to anyone here but him. What should matter is the potential issue with quality control.

OP, you could always contact Spydercos warranty and repair department to try and resolve the issue with them.

Warranty and repair info - https://www.spyderco.com/service-suppor ... ty-repair/

The photo you posted definitely shows a blemish on the scale but its difficult to really see what it is. I would recommend taking some higher quality photos that show the blemish better.
- Nick :bug-red
Image
User avatar
SpyderPhreak
Member
Posts: 214
Joined: Thu Aug 04, 2016 9:29 am
Location: More than a mile high, CO!

Re: Shaman 15V, Bad QC

#34

Post by SpyderPhreak »

Mushroom wrote:
Tue Apr 11, 2023 11:14 am
Lots of unnecessary anger towards the OP.

Owning three of these knives does not automatically make anyone a flipper. Could very well be a collector or someone buying pre-need replacements. Maybe wants to keep one as a safe queen, one as a user, and re-sell the last one for a bit of a profit. (Because he can.)

Regardless of what his plans are for the knives, that shouldn't matter to anyone here but him. What should matter is the potential issue with quality control.

OP, you could always contact Spydercos warranty and repair department to try and resolve the issue with them.

Warranty and repair info - https://www.spyderco.com/service-suppor ... ty-repair/

The photo you posted definitely shows a blemish on the scale but its difficult to really see what it is. I would recommend taking some higher quality photos that show the blemish better.
Disagree. We should be getting these into the hands of as many folks as possible, and it really sucks when people that want them (like the steel junkies here) can't get one because of people like the OP. HIGHLY doubt it's anything but flipping in this case. I'd love to proved wrong, but OP isn't coming back to face the music anytime soon. :eye-roll Because flipper.

OP, please, prove me wrong... ;)
"Engineers don't idle well."

Thank you to our Veterans!
User avatar
TkoK83Spy
Member
Posts: 12464
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Shaman 15V, Bad QC

#35

Post by TkoK83Spy »

All you have to do is read his 6 posts to see he's clearly a flipper, and knows he's got caught. He's signed back in multiple times since his initial post.
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
User avatar
SpyderPhreak
Member
Posts: 214
Joined: Thu Aug 04, 2016 9:29 am
Location: More than a mile high, CO!

Re: Shaman 15V, Bad QC

#36

Post by SpyderPhreak »

TkoK83Spy wrote:
Tue Apr 11, 2023 11:57 am
All you have to do is read his 6 posts to see he's clearly a flipper, and knows he's got caught. He's signed back in multiple times since his initial post.
Yep. And now he's afraid to post again since being called out. The thread should stay for that very reason.
"Engineers don't idle well."

Thank you to our Veterans!
TomahawkT10
Member
Posts: 37
Joined: Thu Jul 28, 2022 3:58 pm

Re: Shaman 15V, Bad QC

#37

Post by TomahawkT10 »

What’s the deal with these scales? They seem to be some kind of smooth G10? I’ve seen a few pics of these and they all look like the OPs… People also saying sometimes they look grey and sometimes brown. Have Spyderco tried something new here?
User avatar
SpyderPhreak
Member
Posts: 214
Joined: Thu Aug 04, 2016 9:29 am
Location: More than a mile high, CO!

Re: Shaman 15V, Bad QC

#38

Post by SpyderPhreak »

TomahawkT10 wrote:
Tue Apr 11, 2023 12:03 pm
What’s the deal with these scales? They seem to be some kind of smooth G10? I’ve seen a few pics of these and they all look like the OPs… People also saying sometimes they look grey and sometimes brown. Have Spyderco tried something new here?
They're smooth, tan G10. I've seen plenty of photos (look at the classifieds on BF) and this is the first I've seen look like this. Granted, it's a pretty poor photo, so hard to say what's going on. Probably taken with the camera on eBay mode... :rofl
"Engineers don't idle well."

Thank you to our Veterans!
User avatar
Danke
Member
Posts: 755
Joined: Tue Jul 21, 2015 10:05 pm

Re: Shaman 15V, Bad QC

#39

Post by Danke »

Final offer. $125 Canadian. Get out while you can!
User avatar
Mushroom
Member
Posts: 7371
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Shaman 15V, Bad QC

#40

Post by Mushroom »

Even if they are a flipper, why should you guys care? It’s not like they're hoarding them or destroying them specifically so no one else can have them. The people who want them still get them, they just pay a little more money for it. Think of it as a convenience fee - Fight the crowds to get one like they did or pay a little extra to browse freely and buy from them when it’s easy.

They probably haven’t responded again because they see everyone unnecessarily trash talking them. What would be the point?

God forbid anyone try to help. Nope, attack him because he bought more knives than you babies wanted him to buy. :eye-roll
- Nick :bug-red
Image
Post Reply