Discuss Spyderco's products and history.
Enactive
Member
Posts: 2056 Joined: Thu Dec 20, 2018 8:19 pm
Location: Wet side of Washington
#3224
Post
by Enactive » Fri Feb 03, 2023 5:50 pm
Opening up my new Kapex! Festool and Spyderco are performance champs.
Pacu0420
Member
Posts: 125 Joined: Tue Sep 27, 2022 6:57 pm
#3225
Post
by Pacu0420 » Wed Feb 08, 2023 9:11 pm
I used my Para3 to open the box my new DLT PM2 came in
Top 6 EDC Spydies: 15V Shaman, S45VN Para3 (Flytanium Scales), S90V DLT PM2, MagnaCut Native5, Crucarta PM2, Maxamet Manix2
Foehammer
Member
Posts: 578 Joined: Tue Jul 19, 2022 8:18 am
#3226
Post
by Foehammer » Wed Feb 08, 2023 9:27 pm
Cut a length of coolant hose with my CruWear pm2. I thought it would be harder cause it was thick rubber, once again a Spyderco gets the job done!
All that is gold does not glitter, not all those who wander are lost.
~Joe
MNOSD member #0045
AH80s
Member
Posts: 271 Joined: Sun Sep 13, 2020 6:38 am
#3227
Post
by AH80s » Thu Feb 09, 2023 6:54 pm
Andrew
AH80s
Member
Posts: 271 Joined: Sun Sep 13, 2020 6:38 am
#3228
Post
by AH80s » Fri Feb 10, 2023 7:21 am
Andrew
AH80s
Member
Posts: 271 Joined: Sun Sep 13, 2020 6:38 am
#3229
Post
by AH80s » Fri Feb 10, 2023 11:26 pm
Same old zip tie cutting.
Andrew
TkoK83Spy
Member
Posts: 12464 Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY
#3230
Post
by TkoK83Spy » Fri Feb 10, 2023 11:27 pm
Busting into those conex boxes like nobody's business!
15
's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
AH80s
Member
Posts: 271 Joined: Sun Sep 13, 2020 6:38 am
#3231
Post
by AH80s » Sat Feb 11, 2023 2:57 am
TkoK83Spy wrote: ↑ Fri Feb 10, 2023 11:27 pm
Busting into those conex boxes like nobody's business!
A fine pointy tip is needed. My K390 Endura is good as well.
Andrew
RevMike
Member
Posts: 1183 Joined: Tue Jan 18, 2022 1:34 am
Location: Pennsylvania
#3232
Post
by RevMike » Wed Mar 08, 2023 7:18 pm
Using an old Native to package up a very expensive broken camera lense to send home for repairs.
404 s in 81 steel flavors.
mikey177
Member
Posts: 2253 Joined: Sat Aug 17, 2019 12:33 am
Location: Philippines
#3234
Post
by mikey177 » Sun Mar 12, 2023 4:33 am
Spy27 Manix helped with the yardwork.
mongo1958
Member
Posts: 655 Joined: Mon Jan 23, 2023 9:01 pm
Location: Atlanta Ga USA
#3235
Post
by mongo1958 » Sun Mar 12, 2023 7:08 am
RickC27 wrote: ↑ Sat May 12, 2018 7:50 am
Resized_20180512_094239 (2).jpeg
Cutting up some cardboard!
LOL
Mongo1958
****John3:16****
Is it true? Is it kind? Is it necessary?
Para 3 Dark Blue G10 S110V (First Spyderco), PM2 Black G10 S45VN, Manix 2 LW Translucent Blue BD1N, Sage 5 LW S30V, Shaman G10 S30V, Tenacious C122BK SE LW, Native 5 LW SE S35VN, P4SE K390, Delica 4SE K390, Endela SE K390, Caribbean SE LC200N, Dragonfly 2 S30V (wife's first Spydie), Autonomy 2 Black LC200N DLC SE.
TkoK83Spy
Member
Posts: 12464 Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY
#3236
Post
by TkoK83Spy » Sun Mar 12, 2023 8:22 am
mongo1958 wrote: ↑ Sun Mar 12, 2023 7:08 am
RickC27 wrote: ↑ Sat May 12, 2018 7:50 am
Resized_20180512_094239 (2).jpeg
Cutting up some cardboard!
LOL
Wow, you must have done some serious digging in this thread for that one!
15
's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Jim Malone
Member
Posts: 1344 Joined: Thu Aug 18, 2005 5:31 pm
Location: Absurdistan E.U.
#3238
Post
by Jim Malone » Sun Mar 12, 2023 6:01 pm
Opening cardboard boxes containing a can with a radioactive tracer at work.
I had to use my blue Dodo to force the lid off when the pull ring broke off.
Not something you want to do or expect from a very expensive custom made radioactive tracer for a patient.
I resharpened the Dodo on my sharpmaker last night. Was supprised how easy it was to get it sharp again.
The Meat man
Member
Posts: 5860 Joined: Wed Jan 03, 2018 8:01 pm
Location: Missouri, USA
#3239
Post
by The Meat man » Tue Mar 14, 2023 7:22 pm
First job for my new CPM 4V Military - slicing up some hot pork steak. :)
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
RevMike
Member
Posts: 1183 Joined: Tue Jan 18, 2022 1:34 am
Location: Pennsylvania
#3240
Post
by RevMike » Tue Mar 14, 2023 8:15 pm
Making Meatball Subs.
404 s in 81 steel flavors.