Hard to disagree...
Also: Nice pic!
Canis I have had for a while now and like it for work. Yojimbo is only a few hours old. Fit and finish wise it is great. Size is good and I think will be better for regular use than my YojUmbo.

Yep, one of my most coarse finished knives. Left this one at 320 grit. That 4V feels/works great with this coarse finish!
First shot after getting home .MG2great choice! glad to see it.
What angle it is? Look about 15 deg. per side, or lower.Wandering_About wrote: ↑Wed Mar 01, 2023 8:00 pmMain edge bevel is finished to 400 grit, microbevel finished at 1000 grit, then stropped with 1 micron diamond.
Edit - wasn't my question to answer haha!Igi964 wrote: ↑Thu Mar 02, 2023 8:14 amWhat angle it is? Look about 15 deg. per side, or lower.Wandering_About wrote: ↑Wed Mar 01, 2023 8:00 pmMain edge bevel is finished to 400 grit, microbevel finished at 1000 grit, then stropped with 1 micron diamond.

Nice!
Less than 15 dps, but I sharpen freehand so I'm not sure exactly what angle. And there is definitely a microbevel, it's needed with this thin of an edge bevel for a more durable edge.Igi964 wrote: ↑Thu Mar 02, 2023 8:14 amWhat angle it is? Look about 15 deg. per side, or lower.Wandering_About wrote: ↑Wed Mar 01, 2023 8:00 pmMain edge bevel is finished to 400 grit, microbevel finished at 1000 grit, then stropped with 1 micron diamond.