Blade HQ Mint Green M4 Manix LW
Re: Blade HQ Mint Green M4 Manix LW
How likely is this to drop in DLC as well?
Re: Blade HQ Mint Green M4 Manix LW
On BladeHQ’s instagram page someone asked this question and BladeHQ answered “possibly…”
Also, on BladeHQ’s instagram page, they have confirmed that this model is pinned together and does not have screw together construction.
-Nick
Re: Blade HQ Mint Green M4 Manix LW
Yes, thanks. Odd that when I called BHQ they said "No way we'll know until we have the order here." Then on their Insta page, they fess up and say "Yes, pinned." Left hand, meet right hand.
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Blade HQ Mint Green M4 Manix LW
Thanks for confirming!
/ ... Again, to all that are interested but worried about "rusty pivots on tool steel blades":
My REX 45 Manix LW has developed no such problems at all, as far as I can tell: Though I can´t really inspect the pivot (pinned construction!) there is no change whatsover concerning action and / or play, despite the knife gets used and carried a lot in wet and sweaty conditions.
. Also, the area of the blade that sits inside the scales, but still gets "uncovered" and can be seen when the blade is opened and closed,shows no sign of corrosion but is actually "shinier" than the rest of the blade.
I have a theory (really just that, perhaps complete nonsense) that actually by frequently opening and closing the blade rust that begins to form is removed again from the pivot area by that motion. A bit like sharpening removes beginning rust from the edge.
But then, with just opening and closing there is probably not enough friction involved to really remove rust.
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- Manixguy@1994
- Member
- Posts: 12640
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Blade HQ Mint Green M4 Manix LW
This could potentially be a deal breaker for me . So will be a wait and see . MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
- IowaGeologist
- Member
- Posts: 33
- Joined: Thu Nov 17, 2022 9:49 am
Re: Blade HQ Mint Green M4 Manix LW
Yep, going to pass on rivets. Would have been an instant get if not.
Re: Blade HQ Mint Green M4 Manix LW
definitely interested, and will be swapping the blade out if it is indeed pinned.
Re: Blade HQ Mint Green M4 Manix LW
Do the AWT Agent scales fit? AWT website says no, but if all that's getting reused is the blade, bearing, and cage then it should fit. They might just not want the warranty headache of people cracking open their pinned knives.
https://appliedweaponstech.com/products ... nix-scales
https://appliedweaponstech.com/products ... nix-scales
- Richard
Re: Blade HQ Mint Green M4 Manix LW
not compatible. the metal piece that houses the lock is different between the g10 and lw versions.riclaw wrote: ↑Fri Feb 17, 2023 11:45 amDo the AWT Agent scales fit? AWT website says no, but if all that's getting reused is the blade, bearing, and cage then it should fit. They might just not want the warranty headache of people cracking open their pinned knives.
https://appliedweaponstech.com/products ... nix-scales
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Blade HQ Mint Green M4 Manix LW
i'm hoping these liner delete manufacturers will make lw compatible models now that they have screws.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Blade HQ Mint Green M4 Manix LW
A way to heavy-up the lightweight models?
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Blade HQ Mint Green M4 Manix LW
i'm not crazy about "mineral blue" but i'd like a spy27 manix and a manix with ti scales. two birds and such.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Blade HQ Mint Green M4 Manix LW
Anybody seen a drop date for these or do we just need to wait for the notification from Blade HQ? I am all over this. Pinned or not.
More CBBL please!
Delica 4 Brown, Manix 2 G10 S110V, Gayle Bradley 2, Manix 2 CF Cruwear, KC Endura HAP40 pakkawood, Sliverax, Kapara, Manix 2 Rex45, Manix 2 4v, Ivory Straight Stretch
Delica 4 Brown, Manix 2 G10 S110V, Gayle Bradley 2, Manix 2 CF Cruwear, KC Endura HAP40 pakkawood, Sliverax, Kapara, Manix 2 Rex45, Manix 2 4v, Ivory Straight Stretch
Re: Blade HQ Mint Green M4 Manix LW
Re: Blade HQ Mint Green M4 Manix LW
There are plenty around with jade green G10 and M4. They have been produced in S90V and carbon fiber and I can attest to the fact that these were slow sellers, and then there is the upcoming model with Cruwear.kennethsime wrote: ↑Wed Feb 15, 2023 10:24 pmI’d be stoked if this was a Manix 2XL with Green Canvas Micarta and M4.
This new model looks interesting. I don't care about pins vs. screws, I don't mind the color, and I really like M4 but I already have a couple of the LW with Rex45 that should last me for a long time.
Re: Blade HQ Mint Green M4 Manix LW
Interesting email exchange with Spyderco:
Me: Is the upcoming Blade HQ Manix Mint Green M4 pinned or screwed construction? BHQ doesn't know, they said to ask you. Thanks.
Spyderco: Thanks for reaching out! All of the Manix models that are currently produced will be the screw construction. The Blade HQ Manix will be screw construction as well. Let us know if you need anything else!
Me: Is the upcoming Blade HQ Manix Mint Green M4 pinned or screwed construction? BHQ doesn't know, they said to ask you. Thanks.
Spyderco: Thanks for reaching out! All of the Manix models that are currently produced will be the screw construction. The Blade HQ Manix will be screw construction as well. Let us know if you need anything else!
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Blade HQ Mint Green M4 Manix LW
We’re getting conflicting reports.
The photos clearly show that it is pinned and the BladeHQ social media team also said it is pinned because they took the promotional photos of the actual knife. (Where did they claim they don’t know? I’ve only seen the opposite.) Now someone from Spyderco is claiming otherwise?
Intentionally or not, either BladeHQ or Spyderco is sharing incorrect information.
The photos clearly show that it is pinned and the BladeHQ social media team also said it is pinned because they took the promotional photos of the actual knife. (Where did they claim they don’t know? I’ve only seen the opposite.) Now someone from Spyderco is claiming otherwise?
Intentionally or not, either BladeHQ or Spyderco is sharing incorrect information.
-Nick
Re: Blade HQ Mint Green M4 Manix LW
InterestingMushroom wrote: ↑Mon Feb 20, 2023 8:31 pmWe’re getting conflicting reports.
The photos clearly show that it is pinned and the BladeHQ social media team also said it is pinned because they took the promotional photos of the actual knife. (Where did they claim they don’t know? I’ve only seen the opposite.) Now someone from Spyderco is claiming otherwise?
Intentionally or not, either BladeHQ or Spyderco is sharing incorrect information.
MRj “Weak things break!”
#0048
#0048