Coarse stones for sharp maker
Coarse stones for sharp maker
https://www.sharpeningsupplies.com/Alum ... -P719.aspx
Here are some nice coarse stones that will fit the sharp maker. Norton makes some in the india stone, but they are only 4"
Here are some nice coarse stones that will fit the sharp maker. Norton makes some in the india stone, but they are only 4"
Re: Coarse stones for sharp maker
Congress Tools also has 1/2" x 6" triangulars in may varieties.
I have the moldmaster set. The coarser stone (80 and 120) are a little rough on the edges. The finer stones are outstanding.
https://www.congresstools.com/catalog/c ... ory/?id=72
I have the moldmaster set. The coarser stone (80 and 120) are a little rough on the edges. The finer stones are outstanding.
https://www.congresstools.com/catalog/c ... ory/?id=72
Re: Coarse stones for sharp maker
Thanks, that's half the price of the Idahone stones: https://idahoners.com/products/7-triang ... 2238502026
Re: Coarse stones for sharp maker
My only concern would be with wear/dishing and trying to lap them.
All SE all the time since 2017
~David
~David
Re: Coarse stones for sharp maker
What do you use for lapping, David?
-Marc (pocketing an S110V Native5 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: Coarse stones for sharp maker
Thank you "WyoJon" for bringing up this subject. I've been saying that same statement over and over for years now concerning the 204 Sharpmaker not having a set of super aggressive stones. That's the one thing that makes the 204 Sharpmaker slightly less than perfect is the fact that they never made any stones that can remove stock at a faster rate. Oh sure the diamond stones somewhat address that problem but they don't do what a high quality extra coarse stone can do for a really dinged up, damaged blade edge.
I will be checking out this source to see what will work on my 204 Sharpmaker and make it a better sharpening tool. Because the 204 Sharpmaker kit is without a doubt the best kit you can take into the field or in any situation you don't have electricity handy. I tend to like to sharpen manually most of the time. I kind of get a feel for what it takes to make the edge super sharp when I do it the hard way.
I will be checking out this source to see what will work on my 204 Sharpmaker and make it a better sharpening tool. Because the 204 Sharpmaker kit is without a doubt the best kit you can take into the field or in any situation you don't have electricity handy. I tend to like to sharpen manually most of the time. I kind of get a feel for what it takes to make the edge super sharp when I do it the hard way.
Re: Coarse stones for sharp maker
Just out of routine I tend to replace all my "Medium stones" periodically especially on the Sharpmaker at least every 2 & a half to 3 years. Because as much as I use them I know they dish out and become uneven over time. I've only ever had to replace one set of FINE stones for the Sharpmaker. and I've never had to replace any Ultra-Fine stones ever.
Because the Medium stones on the 204 Sharpmaker are priced low enough that you don't have to lap them. It saves me a lot of time. I've even had to replace one of the medium stones on one set of my Spyderco 302 Benchstones. Even though the medium stones will wear over time it takes a while before they need replacing. Albeit if I could do it really efficiently I would be open to suggestions and time saving methods I may not be aware of.
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Coarse stones for sharp maker
I replaced my medium stones for the first time last year, and man what a difference 10 years makes.JD Spydo wrote: ↑Sat Jan 28, 2023 11:50 amJust out of routine I tend to replace all my "Medium stones" periodically especially on the Sharpmaker at least every 2 & a half to 3 years. Because as much as I use them I know they dish out and become uneven over time. I've only ever had to replace one set of FINE stones for the Sharpmaker. and I've never had to replace any Ultra-Fine stones ever.
Because the Medium stones on the 204 Sharpmaker are priced low enough that you don't have to lap them. It saves me a lot of time. I've even had to replace one of the medium stones on one set of my Spyderco 302 Benchstones. Even though the medium stones will wear over time it takes a while before they need replacing. Albeit if I could do it really efficiently I would be open to suggestions and time saving methods I may not be aware of.
I’ve also been better about cleaning my stones recently, which helps a lot.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: Coarse stones for sharp maker
I held off on a sharp maker for over 15 years because there was no course. Finally bought one recently. Used the stones by hand for finishing edges for years before.JD Spydo wrote: ↑Sat Jan 28, 2023 11:42 amThank you "WyoJon" for bringing up this subject. I've been saying that same statement over and over for years now concerning the 204 Sharpmaker not having a set of super aggressive stones. That's the one thing that makes the 204 Sharpmaker slightly less than perfect is the fact that they never made any stones that can remove stock at a faster rate. Oh sure the diamond stones somewhat address that problem but they don't do what a high quality extra coarse stone can do for a really dinged up, damaged blade edge.
I will be checking out this source to see what will work on my 204 Sharpmaker and make it a better sharpening tool. Because the 204 Sharpmaker kit is without a doubt the best kit you can take into the field or in any situation you don't have electricity handy. I tend to like to sharpen manually most of the time. I kind of get a feel for what it takes to make the edge super sharp when I do it the hard way.
Re: Coarse stones for sharp maker
How do they compare to sharpmaker brown?Superflex wrote: ↑Sat Jan 28, 2023 9:40 amCongress Tools also has 1/2" x 6" triangulars in may varieties.
I have the moldmaster set. The coarser stone (80 and 120) are a little rough on the edges. The finer stones are outstanding.
https://www.congresstools.com/catalog/c ... ory/?id=72
Re: Coarse stones for sharp maker
A big diamond plate but I wanna get some glass and SIC powder, I think the plate is the wrong grit for my other stones, they tend to stop cutting as well after I lap.
All SE all the time since 2017
~David
~David
- Deadboxhero
- Member
- Posts: 2178
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: Coarse stones for sharp maker
They must have sharpened hundreds of knives at Shot Show, I believe they were using the Diamond/cBN rods which was really handy because they don't load or require any liquid.
They were sharpening knives pretty quickly for people that were waiting.
They were sharpening knives pretty quickly for people that were waiting.
Re: Coarse stones for sharp maker
I think ive degraded a few good bench stones lapping poorly. Im always afraid not matching the stones grit ill end up surfacing the stone to a grit different than the stones partcle size. I surfaced a ceramic stone once and ruined it making it smooth.
Re: Coarse stones for sharp maker
Lapping the friable stuff I have on hand is something I’m doubtless “past-due”, but I know nothing about lapping except its concept.WyoJon wrote: ↑Sat Jan 28, 2023 1:25 pmI think ive degraded a few good bench stones lapping poorly. Im always afraid not matching the stones grit ill end up surfacing the stone to a grit different than the stones partcle size. I surfaced a ceramic stone once and ruined it making it smooth.
So, the lapping surface must match the grit of the abrasive you’re maintaining, thus the possible need for multiple lapping stones?
-Marc (pocketing an S110V Native5 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: Coarse stones for sharp maker
Thanks.
The glass plate and “swappable” SIC grit makes budgetary sense, at least.
-Marc (pocketing an S110V Native5 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: Coarse stones for sharp maker
Since it will take weeks for Assassins Inc to deliver any stones I order with all the snow storms, I got some sand paper and binder clips as others suggested. The pictures explain the technique.
Re: Coarse stones for sharp maker
Well my old beater ka bar 1189 that i bought used and beat up when i was about 13 that had no bevel set on it what so ever, which has always been a pain to put a decent edge on, feels like some old 440a stainless, I used the sharp maker at 30 deg, about 15 minutes with 120 grit, 5 minutes with 220, then straight to the brown sharp maker up to the ultra fine. Has a nice perfect bevel that is mirrored and is easily slicing rolling papers.
Re: Coarse stones for sharp maker
This knife is so beat up the chips in the brass are deaper than file work. The wooden scales dont alight with the brass anymore. Yet this thing is still solid, no play at all in the lock up. Bought a buck 110 not long after this, and still carried this one for years, till my first spyderco sometime in college. Its about 40% thinner than a buck 110, has a better blade profile and nice jimping on the blade spine.
Re: Coarse stones for sharp maker
I managed to reprofile Maxamet using this method so it absolutely does work. I'd recommend a decent quality silicon carbide sandpaper, I use this pack off Amazon, pretty good stuff for $8.
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet https://a.co/d/9Ow4nrS
All SE all the time since 2017
~David
~David