enuff 2!!!
Re: enuff 2!!!
Wow, after watching Eric’s interview and seeing the K390 Enuff 2 in hand, I’m getting really pumped for this release! Even though I just got a Waterway, another slim little fixed blade will be making its way into my stable ASAP. I’ve tried the handle on an original Enuff in my local store and it fits my hand perfectly. Check out the interview here:
https://youtu.be/4EY3vGPdhOw
https://youtu.be/4EY3vGPdhOw
Current Carries: Military 4V, Stretch XL Cruwear, Sage 1 CF, Siren Sprint S90V, ZDP Delica
Wishlist: Cruwear Military, Super Blue Caly 3.5
Favorite Steels: CTS-XHP, Cruwear, ZDP-189, LC200N
Wishlist: Cruwear Military, Super Blue Caly 3.5
Favorite Steels: CTS-XHP, Cruwear, ZDP-189, LC200N
Re: enuff 2!!!
I’m here for the folders.
Or so I keep saying, probably to convince myself to save money by laying off the fixies. Still, I do have the Enuff Salt and the Waterway.
I just don’t think I can resist the K390 Enuff2, which should be, as JRinFL has suggested, More Than Enuff.
Or so I keep saying, probably to convince myself to save money by laying off the fixies. Still, I do have the Enuff Salt and the Waterway.
I just don’t think I can resist the K390 Enuff2, which should be, as JRinFL has suggested, More Than Enuff.
-Marc (pocketing a Cruwear Military2 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
Re: enuff 2!!!
I want to be excited about the Enuff 2 in K390, but, they have yet to get the first Enuff 2 in VG10 to market. I love the releases and I know they try to get the knives out in 3-4 months after a release, but . . . .
Honestly both of the K390 releases, Enuff 2 and Lil' Temperance, are soooooooo tempting and I can easily see myself buying them as soon as they are available, but, as the Lil'Temperance wasn't even a prototype of the K390 version, I am not getting my hopes up of seeing either for a long time.
This post makes me sad.
.+
Honestly both of the K390 releases, Enuff 2 and Lil' Temperance, are soooooooo tempting and I can easily see myself buying them as soon as they are available, but, as the Lil'Temperance wasn't even a prototype of the K390 version, I am not getting my hopes up of seeing either for a long time.
This post makes me sad.
.+
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: enuff 2!!!
I'm (perhaps unrealistically) hopeful that the K390 versions drops first. Spyderco does like to listen to us and they do like to spring surprises on us as well.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
- kennethsime
- Member
- Posts: 4790
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: enuff 2!!!
I was pretty stoked to hear Eric talking about Sal hand-carving the FRN molds for this knife. Also really stoked to see the K390 come along so quickly. I'm sure this will be a great knife.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: enuff 2!!!
I think Sal's Talking Story of carving that handle is saved in that Talking Story Thread.
-
- Member
- Posts: 1399
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: enuff 2!!!
Very much interested in a fixed blade in K390, so this has my attention.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: enuff 2!!!
The Enuff handle is amazing indeed.MFlovejp wrote: ↑Wed Jan 18, 2023 11:38 amWow, after watching Eric’s interview and seeing the K390 Enuff 2 in hand, I’m getting really pumped for this release! Even though I just got a Waterway, another slim little fixed blade will be making its way into my stable ASAP. I’ve tried the handle on an original Enuff in my local store and it fits my hand perfectly. Check out the interview here:
https://youtu.be/4EY3vGPdhOw
I had the clip point version, came to realize that the cutting edge was just too short for what I carry a fixed blade for (and I don't carry one often anyway), but still almost kept the Enuff just cause I loved that feel of the handle in hand so much.
Now I think that the scales on the Enuff 2 are exactly the same (?), BUT:
- I figure the handle will be a bit thinner than on the "1", due to the thinner blade stock? Just 0.7 mm though, wonder if this will be actually noticeable (in direct comparisin it probably would, otherwise I don't know).
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: enuff 2!!!
i think it'll be noticeable. the micarta scales on my manix feel a little thinner because of the texturing and it's very noticeable. i still like it though. if you liked it before, my guess is you still will, but you may feel a difference.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
-
- Member
- Posts: 6949
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: enuff 2!!!
Just for clarity, Sal did not hand-carve FRN molds, he hand-carved the prototype handle scales that were then copied for the molds, something he has done many times over the years.kennethsime wrote: ↑Wed Jan 18, 2023 3:11 pmI was pretty stoked to hear Eric talking about Sal hand-carving the FRN molds for this knife. Also really stoked to see the K390 come along so quickly. I'm sure this will be a great knife.
- kennethsime
- Member
- Posts: 4790
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: enuff 2!!!
Ahhhhh that makes a lot more sense. Thanks!yablanowitz wrote: ↑Thu Jan 19, 2023 6:36 amJust for clarity, Sal did not hand-carve FRN molds, he hand-carved the prototype handle scales that were then copied for the molds, something he has done many times over the years.kennethsime wrote: ↑Wed Jan 18, 2023 3:11 pmI was pretty stoked to hear Eric talking about Sal hand-carving the FRN molds for this knife. Also really stoked to see the K390 come along so quickly. I'm sure this will be a great knife.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
- Buddafucco
- Member
- Posts: 3357
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: enuff 2!!!
•• Beau
Re: enuff 2!!!
I would have names this knife MTE AKA “More Than Enough”
Mule Team Army 001
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
Re: enuff 2!!!
where is evil d?! that's got his name all over it!
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
- Buddafucco
- Member
- Posts: 3357
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: enuff 2!!!
American Flags & Cutlery... SpyderEdge... https://americanflagsandcutlery.com/kni ... xed-blade/
•• Beau
Re: enuff 2!!!
Yeah, that serrated one looks really good to me.
Full flat serrated VG10 is a winning formula in lots of my uses, so I’m glad there’s a thin fixed blade in the line up with that. This knife is a really sweet size.
I actually like the extra strap on the sheath too.
K390 on a fixed blade will be fun to try and I’m wondering if we will indeed see serrated k390 on this model. I think so, but since it hasn’t been announced yet, I’m not sure.
The novelty of a serrated k390 fixed blade is very alluring to me, and I want to support the idea in hopes we see more if it, but I’m not sure the Enuff 2 is the right model for me to test that out.
A comparison of this model with the Aqua Salt would be useful to me.
Full flat serrated VG10 is a winning formula in lots of my uses, so I’m glad there’s a thin fixed blade in the line up with that. This knife is a really sweet size.
I actually like the extra strap on the sheath too.
K390 on a fixed blade will be fun to try and I’m wondering if we will indeed see serrated k390 on this model. I think so, but since it hasn’t been announced yet, I’m not sure.
The novelty of a serrated k390 fixed blade is very alluring to me, and I want to support the idea in hopes we see more if it, but I’m not sure the Enuff 2 is the right model for me to test that out.
A comparison of this model with the Aqua Salt would be useful to me.
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool:
-
- Member
- Posts: 1399
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: enuff 2!!!
K390 Enuff 2 is in Reveal 12, the most recent one.Cl1ff wrote: ↑Tue Jan 24, 2023 9:20 pmYeah, that serrated one looks really good to me.
Full flat serrated VG10 is a winning formula in lots of my uses, so I’m glad there’s a thin fixed blade in the line up with that. This knife is a really sweet size.
I actually like the extra strap on the sheath too.
K390 on a fixed blade will be fun to try and I’m wondering if we will indeed see serrated k390 on this model. I think so, but since it hasn’t been announced yet, I’m not sure.
The novelty of a serrated k390 fixed blade is very alluring to me, and I want to support the idea in hopes we see more if it, but I’m not sure the Enuff 2 is the right model for me to test that out.
A comparison of this model with the Aqua Salt would be useful to me.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: enuff 2!!!
A serrated k390 Enuff 2 has not been announced. That is what I meant.Wandering_About wrote: ↑Tue Jan 24, 2023 9:22 pmK390 Enuff 2 is in Reveal 12, the most recent one.Cl1ff wrote: ↑Tue Jan 24, 2023 9:20 pm
K390 on a fixed blade will be fun to try and I’m wondering if we will indeed see serrated k390 on this model. I think so, but since it hasn’t been announced yet, I’m not sure.
The novelty of a serrated k390 fixed blade is very alluring to me, and I want to support the idea in hopes we see more if it, but I’m not sure the Enuff 2 is the right model for me to test that out.
A comparison of this model with the Aqua Salt would be useful to me.
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool: