someone must've heard this is the last spyderco vivi wants so they won't release it.
lookin forward to the military 2 also. wonder which will drop first?
I'll basically be done buying knives after those two, another aogami super gyuto and maybe one more aqua salt back-up.....at least until they come up with something new to suck me back in!
Last bump of the year. Slowly losing interest as time goes on.....
Hang in there vivi ! Buddy Dan
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
I'm sure it's frustrating for Spyderco, too.
It's an exciting model.
If I remember correctly, when it was first available for preorder it was listed for ~$130 at online retailers. Now it's ~$138. I'm curious what it'll be this coming year. As someone who still cringes at having to spend over $100 for a knife (I know I'm cheap ), its getting harder to justify my knife purchases as prices continue to climb.
I'm too cautious to try the Swick 6 and risk the hole being too small for my finger.
the price increase bothers me less than seeing three variations of the same model launch a minimum of half a year before the version I'd like to purchase.
I can think of no legitimate reason to release the serrated version of the Swick 5 and not the plain. They surely use the same sheath. What in the world is the hold up?
the price increase bothers me less than seeing three variations of the same model launch a minimum of half a year before the version I'd like to purchase.
I can think of no legitimate reason to release the serrated version of the Swick 5 and not the plain. They surely use the same sheath. What in the world is the hold up?
i can't understand how it can be so hard for a knife company to source a sheath. lots of small edc knives have molded plastic sheaths that work great and cost very little. i bought a crkt spew with a molded sheath for $100 less than the swick costs. esee sells izula sheaths for super cheap and they're really good.
the swick sheaths we've seen so far don't look like anything special, so i don't get the hold up either. i know there have been issues getting them out that are fairly personal, but at some point you have to just get it done or pay someone else to get it done. it can't be good for business to be sitting on a stockpile of knives that you can't sell.
and i agree it's weird that they would release everything else but that one model. a lot of this doesn't make sense. i suppose it doesn't have to make sense to us though.
Glad I'm not waiting with bated breath I'd have passed out years ago. At this point I'm just hoping it launches in time to test one out this farming season.
Swick5 Large Hole LC200N PlainEdge Black G-10 Boltaron Sheath FB14P5 (USA) was announced in Reveal 5 (MAY 2020) but never released.
The other 3 Swick models were released in AUG-OCT 2022:
Swick5 Large Hole LC200N PlainEdge Black G-10 Boltaron Sheath FB14P5 (USA) - Reveal 5 (MAY 2020)
Swick5 Large Hole LC200N SpyderEdge Black G-10 Boltaron Sheath FB14S5 (USA) - AUG 2022
Swick6 Small Hole LC200N PlainEdge Black G-10 Boltaron Sheath FB14P6 (USA) - OCT 2022
Swick6 Small Hole LC200N SpyderEdge Black G-10 Boltaron Sheath FB14S6 (USA) - OCT 2022
I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
I'd dare to say the 3 Swick models that were released in 2022 must have seen a rather limited release, quite likely just a domestic US release, as European dealers don't even have a placeholder for these knives yet. Not a single clue to suggest any of them expect these knives to be incoming at all.
Like many others I was looking forward to get one of these, but something obviously didn't go as planned, some of it we know, but maybe there's more. No worries on my part, it's only knives. I hope Spyderco can work it out and start making some money on this project, eventually. Maybe we'll even see the return of vivi, once the Swick 5 PE is finally available in the stores?
Given that Magnacut is being favourably compared to LC200N re: corrosion resistance would it be suitable for a Swick? I know next to nothing other than that it's the hot new steel on the block (and I'm very behind on these sort of things). IMO the Swick is great platform to test steels in more demanding contexts- especially anything to do with water or horticultural activities, both of which are great tests of corrosion resistance & edge retention.
Looks like Swick 5 PlainEdge may finally make it to US dealers soon — just shy of 3 years since it was announced in Reveal 5 on May 5, 2020.
I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
@Vivi They show in stock on the on line Spyderco Catalog.
Mongo1958
****John3:16****
Is it true? Is it kind? Is it necessary?
Para 3 Dark Blue G10 S110V (First Spyderco), PM2 Black G10 S45VN, Manix 2 LW Translucent Blue BD1N, Sage 5 LW S30V, Shaman G10 S30V, Tenacious C122BK SE LW, Native 5 LW SE S35VN, P4SE K390, Delica 4SE K390, Endela SE K390, Caribbean SE LC200N, Dragonfly 2 S30V (wife's first Spydie), Autonomy 2 Black LC200N DLC SE.