CPM 15v Manix 2
Re: CPM 15v Manix 2
I very rarely have heard of anybody getting a sprint run knife after notification via email. It almost seems pointless, they'll be gone before you even get to the website.
Best bet is to FOLLOW the alerts thread...discussion here.
Best bet is to FOLLOW the alerts thread...discussion here.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: CPM 15v Manix 2
Well darn, I was hoping they would restock.asdfghjkl wrote: ↑Mon Dec 12, 2022 5:03 pmSo I called Spyderco asking if there were going to have more on their website. Like the Siren Sprint that sold out on the spyderco website and then more came up. They said no.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
Re: CPM 15v Manix 2
According to the updates I got from my script, St. Knicks sold out in 10-15 minutes. BHQ and KSF sent me notifications they got stock, but my stock checker never noticed--so either it just didn't monitor successfully or they sold out within the check interval of 5 mins.Rymanz wrote: ↑Mon Dec 12, 2022 12:59 pmLooks like some additional shipments were made if St. Nicks indeed had 30. How long did it take for them to sell out?
I signed up for notifications from them but didn't get the email. Got the BHQ one, bit was too late.
The level of retailer camping on this drop is wild to me.
KSF has now deleted the product page, for what that's worth. I'm assuming that means they're not planning on getting any more stock.
Re: CPM 15v Manix 2
Interestingkennbr34 wrote: ↑Mon Dec 12, 2022 5:36 pmAccording to the updates I got from my script, St. Knicks sold out in 10-15 minutes. BHQ and KSF sent me notifications they got stock, but my stock checker never noticed--so either it just didn't monitor successfully or they sold out within the check interval of 5 mins.Rymanz wrote: ↑Mon Dec 12, 2022 12:59 pmLooks like some additional shipments were made if St. Nicks indeed had 30. How long did it take for them to sell out?
I signed up for notifications from them but didn't get the email. Got the BHQ one, bit was too late.
The level of retailer camping on this drop is wild to me.
KSF has now deleted the product page, for what that's worth. I'm assuming that means they're not planning on getting any more stock.
Might mean KSF also got a larger shipment like SNK.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
-
- Member
- Posts: 364
- Joined: Sat Feb 19, 2022 2:20 am
Re: CPM 15v Manix 2
This is my first time trying to get a hot sprint. It’s brutal for people with day jobs.
-
- Member
- Posts: 1391
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: CPM 15v Manix 2
Well hopefully these selling fast pave the way for more sprint runs. And good to keep in mind that when the BBB collab folder does get made, it'll be a production model, so even though it may be a while, that will give plenty more people a chance at the mystical 15V.
It is discouraging to have to play the speed game, especially when you've got a normal life and can't live by a phone or computer.
It is discouraging to have to play the speed game, especially when you've got a normal life and can't live by a phone or computer.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: CPM 15v Manix 2
Anyone know if Knifejoy had their drop yet?
-
- Member
- Posts: 364
- Joined: Sat Feb 19, 2022 2:20 am
Re: CPM 15v Manix 2
Yup,Wandering_About wrote: ↑Mon Dec 12, 2022 5:53 pmWell hopefully these selling fast pave the way for more sprint runs. And good to keep in mind that when the BBB collab folder does get made, it'll be a production model, so even though it may be a while, that will give plenty more people a chance at the mystical 15V.
It is discouraging to have to play the speed game, especially when you've got a normal life and can't live by a phone or computer.
I’m looking forward to the colab too. I heard BBB is helping with the magna-cut HT too so that’s also something to look forward too as well. If 15V is really popular I don’t see a reason it won’t make regular production.
- legOFwhat?
- Member
- Posts: 3143
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: CPM 15v Manix 2
Realistically think we'll see 15v in any other model within the next year or so? Wonder if exclusives are in the works?
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: CPM 15v Manix 2
so what's my chance of actually being able to get one of these if I'm not actively paying attention to the alert threads?
I'd be a little disappointed not getting one, but from what I'm reading on the forum, it sounds like I'll have a chance to try 15V in the future.
I'd be a little disappointed not getting one, but from what I'm reading on the forum, it sounds like I'll have a chance to try 15V in the future.
Re: CPM 15v Manix 2
The SFO guys, by their own admission, have no idea of if or when stock will arrive. They seem almost intentionally ignorant of such things. I would very much like to buy my 15V Manix from SFO, but they are usually useless over the phone.Rymanz wrote: ↑Mon Dec 12, 2022 5:35 pmWell darn, I was hoping they would restock.asdfghjkl wrote: ↑Mon Dec 12, 2022 5:03 pmSo I called Spyderco asking if there were going to have more on their website. Like the Siren Sprint that sold out on the spyderco website and then more came up. They said no.
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
Re: CPM 15v Manix 2
Dlt has 3 in stock but will not release until the big load comes in.
Re: CPM 15v Manix 2
KSF was the only vendor I got a notice from. That was around 4:25 pm ET. I saw the Outlook notification pop-up while I was on the phone with someone I work with. Mercifully, it was a voice-only call so I went there immediately and got one - assuming they didn't oversell. I checked back a very short while later and they were all gone. I signed up for notifications at a lot of places, and I assume their stock was gone before the email even went out to me. Crazy.
Re: CPM 15v Manix 2
Negative, for a variety of reasons but mostly as far as I know that Shawn is not a fan.crsmith1911 wrote: ↑Mon Dec 12, 2022 1:38 pmNew here but does anyone know if any of these BBB 15v knives will come in a DLC blade?
Re: CPM 15v Manix 2
then. This would be an amazing pick-up with an OpFocus discount.attila wrote: ↑Mon Dec 12, 2022 6:21 pmThe SFO guys, by their own admission, have no idea of if or when stock will arrive. They seem almost intentionally ignorant of such things. I would very much like to buy my 15V Manix from SFO, but they are usually useless over the phone.Rymanz wrote: ↑Mon Dec 12, 2022 5:35 pmWell darn, I was hoping they would restock.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
Re: CPM 15v Manix 2
Same here! Good luck to both of us!Rymanz wrote: ↑Mon Dec 12, 2022 7:12 pmthen. This would be an amazing pick-up with an OpFocus discount.attila wrote: ↑Mon Dec 12, 2022 6:21 pmThe SFO guys, by their own admission, have no idea of if or when stock will arrive. They seem almost intentionally ignorant of such things. I would very much like to buy my 15V Manix from SFO, but they are usually useless over the phone.
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
-
- Member
- Posts: 607
- Joined: Sun Apr 14, 2019 7:56 pm
Re: CPM 15v Manix 2
I work nights as a correction officer and sleep during the day when these drop.....major bummer! Bah humbug
Re: CPM 15v Manix 2
This brings memories of the crucarta shaman sprint.
MRj “Weak things break!”
#0048
#0048
Re: CPM 15v Manix 2
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
- legOFwhat?
- Member
- Posts: 3143
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: CPM 15v Manix 2
That was a little over the top...
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049