Swapping Native 5 lightweight (FRN) scales?
-
- Member
- Posts: 8
- Joined: Wed Dec 08, 2021 12:10 pm
Swapping Native 5 lightweight (FRN) scales?
Any tips and tricks for swapping out scales for the Native 5 lightweight? I'm sure it's pretty straightforward but the one thing I'm not 100% sure about is how to get the lockbar pin out. I'm assuming you drift it out with a very small pin punch?
Re: Swapping Native 5 lightweight (FRN) scales?
The pin is nested between the liners with just a reduced diameter head showing through the hole. Do not drift it out with the scales still assembled. I just pulled mine out with my fingers once it was opened up. No issues. Disassembly was very straight forward. A number of tips and tricks online for putting lockbacks back together.
Cheers
Erik
Cheers
Erik
Re: Swapping Native 5 lightweight (FRN) scales?
Yes no need for anything else than a T8 screwdriver for the body and pivot screws.
And a T6 if you want to remove the pocket clip, but it is not necessary if you swap scales with another LW.
The lockbar pin just slides in there nicely.
Here's how it looks like :
And a T6 if you want to remove the pocket clip, but it is not necessary if you swap scales with another LW.
The lockbar pin just slides in there nicely.
Here's how it looks like :
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Swapping Native 5 lightweight (FRN) scales?
Keep the lock bar with its respective blade, i.e. change both to the new scales. The lock bar material may be specific to the blade material.
Last edited by Chumango on Sat Nov 12, 2022 4:25 pm, edited 1 time in total.
Re: Swapping Native 5 lightweight (FRN) scales?
Forgot to mention it. I can attest that lockbar material is important. keeping the lockbar with its intended blade is important.
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
-
- Member
- Posts: 8
- Joined: Wed Dec 08, 2021 12:10 pm
Re: Swapping Native 5 lightweight (FRN) scales?
Ah, thanks for the tips! I also found this on YouTube which was helpful.