I’m interested in a D’Allara Salt! Anyone else?
I’m interested in a D’Allara Salt! Anyone else?
I would really like a D’Allara Salt based on the original Rescue pattern, in SE MagnaCut with orange FRN scales. I’d settle for H2 or LC200N as well, but I assume such a project would be far enough out that MagnaCut will have its heat treats worked out (I assume there will be a protocol for corrosion resistance and another optimizing it’s non-Salt properties).
We’re limited to 10 questions in the poll, and I’ve set it up to allow 4 choices - steel, handle color, PE/SE, and lock. I am unsure if the original BBL can be done in a linerless Salt knife so I included backlock as it can, and is well appreciated. I was unable to capture grind (hollow/FFG) or clip (barrel, spoon, wire) in the poll, so please discuss in the comments!
So how bout it SF, how would you build it?
We’re limited to 10 questions in the poll, and I’ve set it up to allow 4 choices - steel, handle color, PE/SE, and lock. I am unsure if the original BBL can be done in a linerless Salt knife so I included backlock as it can, and is well appreciated. I was unable to capture grind (hollow/FFG) or clip (barrel, spoon, wire) in the poll, so please discuss in the comments!
So how bout it SF, how would you build it?
Re: I’m interested in a D’Allara Salt! Anyone else?
Couldn't see myself picking one over a Caribbean unless it came with scales like the D'Allara 2 and even then it's a hard pick.
All SE all the time since 2017
~David
~David
Re: I’m interested in a D’Allara Salt! Anyone else?
so weird. i remember reading your post a few days ago now, but i had forgotten all about it when i posted mine about the caribbean being a d'allara descendent. i'm too tired lately. this thread probably started me down that line of thinking.
anyway, as i said in my thread, i think the d'allara and the caribbean share a lot of similarities. have you ever tried one?
anyway, as i said in my thread, i think the d'allara and the caribbean share a lot of similarities. have you ever tried one?
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: I’m interested in a D’Allara Salt! Anyone else?
I’ve never tried either model. But the first time I saw a D’Allara and read the backstory I wanted one.
Re: I’m interested in a D’Allara Salt! Anyone else?
Magnacut cause I don't have any yet, CBBL because it's my favorite, yellow because of all the colors listed it's the easiest to dye, plain edge because I prefer it. I would only request G-10 instead of FRN.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: I’m interested in a D’Allara Salt! Anyone else?
Since the D'Allara got some hate for being hard to unlock, a wet environment version seems like it wouldn't work in the current design. I'd be interested to see a backlock version, though I'm not sure it's likely.
Re: I’m interested in a D’Allara Salt! Anyone else?
i was hoping sal might chime in with some insight, but maybe jr was right and they just have a common designer instead of a common ancestry.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
-
- Member
- Posts: 1802
- Joined: Thu Jun 27, 2019 4:08 am
- Location: Norway
Re: I’m interested in a D’Allara Salt! Anyone else?
I think you bring up an important point.
Personally I would preferably like to see another run of the D'allara Rescue, done pretty true to the old one, as it would mostly add a symbolic value to my collection anyways.
To add practical value, I would additionally (continue to beat a dead horse and) wish for a smaller version of the Caribbean.
That said, anything made based on the D'Allara would be of interest and taken in to consideration.
Re: I’m interested in a D’Allara Salt! Anyone else?
I think this would be an awesome salt! I voted Magnacut but would take any steel in Hollow Ground SE.
I think the color FRN needs some input though. I was thinking navy blue or gold to match John D’Allara’s uniform or shield. This is still a special knife that need to be treated as such.
I think the color FRN needs some input though. I was thinking navy blue or gold to match John D’Allara’s uniform or shield. This is still a special knife that need to be treated as such.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
Re: I’m interested in a D’Allara Salt! Anyone else?
I was just going with the existing Salt colors, but a navy blue would be nice too.Dazen wrote: ↑Thu Sep 15, 2022 12:22 pmI think this would be an awesome salt! I voted Magnacut but would take any steel in Hollow Ground SE.
I think the color FRN needs some input though. I was thinking navy blue or gold to match John D’Allara’s uniform or shield. This is still a special knife that need to be treated as such.
Re: I’m interested in a D’Allara Salt! Anyone else?
I want one regardless of steel just because of the story.
If we spent as much time trying as we do doubting, we might have already accomplished it.
-Tom
Re: I’m interested in a D’Allara Salt! Anyone else?
Ummm yes.
I'm okay with the lock and I also vote for g10 over frn.
Gold and navy blue would be a great color choice imo.
I'm okay with the lock and I also vote for g10 over frn.
Gold and navy blue would be a great color choice imo.
Re: I’m interested in a D’Allara Salt! Anyone else?
I would prefer a Manix salt. Manix magnacut that has been discussed or lc200. A yellow Manix would be cool.
Need more CBBL in general
Need more CBBL in general
More CBBL please!
Delica 4 Brown, Manix 2 G10 S110V, Gayle Bradley 2, Manix 2 CF Cruwear, KC Endura HAP40 pakkawood, Sliverax, Kapara, Manix 2 Rex45, Manix 2 4v, Ivory Straight Stretch
Delica 4 Brown, Manix 2 G10 S110V, Gayle Bradley 2, Manix 2 CF Cruwear, KC Endura HAP40 pakkawood, Sliverax, Kapara, Manix 2 Rex45, Manix 2 4v, Ivory Straight Stretch
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Re: I’m interested in a D’Allara Salt! Anyone else?
For this reason, mine is never carried. Sad, because otherwise this would be a great work knife for me. Caged BBL are the way to go.
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
Re: I’m interested in a D’Allara Salt! Anyone else?
Recent favourites: Massad Ayoob CPM CRU-WEAR PE & SE, Yojimbo 2, Lil' Temperance 3.
-
- Member
- Posts: 6147
- Joined: Wed Nov 18, 2015 10:30 am
- Location: Unfashionable West End of the Galaxy (SE USA)
Re: I’m interested in a D’Allara Salt! Anyone else?
Correct. May as well make it a fixed blade in a Salt version since it would be very difficult to unlock in the wet. The Caribbean already exists, so I doubt Spyderco will make it with another lock.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001