2022 P.I.T.S Sprint!

Discuss Spyderco's products and history.
User avatar
kobold
Member
Posts: 1946
Joined: Mon Aug 24, 2020 12:38 am
Location: The Swamp

Re: 2022 P.I.T.S Sprint!

#181

Post by kobold »

Built like a tank, yet light and compact. The P.I.T.S. feels like a "forever knife". The design will stand the test of time and there is not much that can go wrong.
Image
Military/PM2/P3 Native Chief/Native GB2 DF2 PITS Chaparral Tasman Salt 2 SE Caribbean Sheepfoot SE SpydieChef Swayback Manix2 Sage 1 SSS Stretch 2 XL G10
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#182

Post by Ranger_Ike »

kobold wrote:
Sat Aug 20, 2022 10:46 am
Ranger_Ike wrote:
Wed Aug 17, 2022 6:08 pm
I have a question for you all that have a PITS. Is the action consistent from the closed position to the open position?

The reason I ask is because mine doesn’t open with a single fluid motion. It’s pretty easy to start to open it and when you get it about a half inch or so open (see pic) it hits a wall. When you apply more pressure it overcomes that and then hits another wall when it’s not quite half way open. (Second pic)

The rest of the way it is consistent and smooth.

Just wondering if this is normal, or something that will smooth out.

First “wall”

Second (not as abrupt) “wall”

I only have the first "wall" after I disassembled, cleaned and (fluorinated CRK) greased the pivot area. The first "wall" won't go away, it is the shape of the tang.

Thanks. I’m going to continue carrying mine for a while and then do a take apart and clean. It has already gotten a lot smoother and the second wall is gone completely. The first wall is not as abrupt.

This knife may be absolutely perfect. I can’t put it down.
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#183

Post by Ranger_Ike »

kobold wrote:
Sat Aug 20, 2022 10:59 am
Built like a tank, yet light and compact. The P.I.T.S. feels like a "forever knife". The design will stand the test of time and there is not much that can go wrong.
Image
Agree completely!

What drew me in was the blade shape. It reminded me of the Slysz Bowie that I will probably never have. Having it now, I like it even more than I thought I would.

Image

One thing I didn’t expect was the size of the blade/cutting edge. Looking at the specs I guess I expected it to be the same size as the para 3. This was a little bit of a bummer, cause I always felt like the para 3 was just a tad short. But in reality the blade feels quite a bit bigger. And after comparing them side by side, there’s a pretty good size difference.

Image

Image

It feels just the right length.

Also something I didn’t notice at first, the handle shape reminds me of a smaller version of the carribean.

And carrying it is another shock. It somehow feels smaller in pocket than a delica to me. It is a little thinner than the delica, but weighs a little more. But it really doesn’t have much bigger of a profile.

Vs delica:
Image

Image

Image

Not trying to get into a this versus that debate. Just showing size comparison for reference. I didn’t expect it to be as pocket friendly as it is. I did bend the pocket clip in a bit to get a bit more tension.
Bemo
Member
Posts: 1299
Joined: Sat Jul 27, 2019 6:00 pm
Location: Boise Idaho

Re: 2022 P.I.T.S Sprint!

#184

Post by Bemo »

I'm hoping there's another batch coming to my favorite dealers soon. Thanks for all the pics folks, and especially the size comparison. Looks like a fantastic EDC.
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#185

Post by Ranger_Ike »

If anyone is interested g and r tactical has at least one in stock. Knives21 gives you the knife for 238 before shipping. You do have to pay shipping, but it still saves about $30

https://www.gandrtactical.com/Spyderco- ... _3280.html
User avatar
ladybug93
Member
Posts: 8145
Joined: Tue May 15, 2018 11:20 pm

Re: 2022 P.I.T.S Sprint!

#186

Post by ladybug93 »

wow. seeing this next to a delica makes it more desirable to me. too many other knives to buy though.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
JRinFL
Member
Posts: 6149
Joined: Wed Nov 18, 2015 10:30 am
Location: Unfashionable West End of the Galaxy (SE USA)

Re: 2022 P.I.T.S Sprint!

#187

Post by JRinFL »

Thanks for adding those great pictures to the thread.

I can’t think of another company that would make a model like this and bring it back twice! Thanks Spyderco.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
BigFishShamu
Member
Posts: 154
Joined: Fri Apr 08, 2022 1:57 pm

Re: 2022 P.I.T.S Sprint!

#188

Post by BigFishShamu »

Waiting until next check to order one. I hope they’ll still be in stock! I really want to USE this knife.
“Stepping into the ring was the fight.”
User avatar
ladybug93
Member
Posts: 8145
Joined: Tue May 15, 2018 11:20 pm

Re: 2022 P.I.T.S Sprint!

#189

Post by ladybug93 »

i got to handle a pits today. it was way better than i thought it would be. the only thing that kept me from buying it is my desire to buy a different knife tomorrow. it fit my hand perfectly though and just felt so nice in hand. if you're on the fence, it's great.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
JRinFL
Member
Posts: 6149
Joined: Wed Nov 18, 2015 10:30 am
Location: Unfashionable West End of the Galaxy (SE USA)

Re: 2022 P.I.T.S Sprint!

#190

Post by JRinFL »

I took mine apart to see if I could lighten the action some. Take down is easy, but reassembly is a bit tricky. The back spring is pretty strong. Putting it back together requires a wood or plastic wedge to keep the spring open, otherwise you cannot get the pin past the blade.

One important tip is that the screws holding the stop pin are very influential in how heavy or light the action is. Tighten the pivot screws until there is no blade wobble, then fine tune with the stop pin screws. Purple Loctite 222 will keep the screws from backing out.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
User avatar
sal
Member
Posts: 17194
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Re: 2022 P.I.T.S Sprint!

#191

Post by sal »

Hi BigFishShamu,

Welcome to our forum.

sal
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#192

Post by Ranger_Ike »

JRinFL wrote:
Thu Aug 25, 2022 8:28 pm
I took mine apart to see if I could lighten the action some. Take down is easy, but reassembly is a bit tricky. The back spring is pretty strong. Putting it back together requires a wood or plastic wedge to keep the spring open, otherwise you cannot get the pin past the blade.

One important tip is that the screws holding the stop pin are very influential in how heavy or light the action is. Tighten the pivot screws until there is no blade wobble, then fine tune with the stop pin screws. Purple Loctite 222 will keep the screws from backing out.
Thanks for the tips. Was looking at mine wondering if that would be tricky with the back spring on reassembly. I’ll likely wait a bit longer and break mine in a bit more before taking it apart for a cleaning. Looking forward to it though.

Did you notice much difference in action after fine tuning? Mine has smoothed out a lot from normal use. It feels really good now.
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#193

Post by Ranger_Ike »

BigFishShamu wrote:
Sun Aug 21, 2022 10:32 am
Waiting until next check to order one. I hope they’ll still be in stock! I really want to USE this knife.
Welcome to the forum. You won’t regret it if you get one. It’s a great EDC knife. Feels like it’s made to be used for a long time. Definitely inspires confidence in hand.
JRinFL
Member
Posts: 6149
Joined: Wed Nov 18, 2015 10:30 am
Location: Unfashionable West End of the Galaxy (SE USA)

Re: 2022 P.I.T.S Sprint!

#194

Post by JRinFL »

Ranger_Ike wrote:
Thu Aug 25, 2022 9:06 pm
JRinFL wrote:
Thu Aug 25, 2022 8:28 pm
I took mine apart to see if I could lighten the action some. Take down is easy, but reassembly is a bit tricky. The back spring is pretty strong. Putting it back together requires a wood or plastic wedge to keep the spring open, otherwise you cannot get the pin past the blade.

One important tip is that the screws holding the stop pin are very influential in how heavy or light the action is. Tighten the pivot screws until there is no blade wobble, then fine tune with the stop pin screws. Purple Loctite 222 will keep the screws from backing out.
Thanks for the tips. Was looking at mine wondering if that would be tricky with the back spring on reassembly. I’ll likely wait a bit longer and break mine in a bit more before taking it apart for a cleaning. Looking forward to it though.

Did you notice much difference in action after fine tuning? Mine has smoothed out a lot from normal use. It feels really good now.
Yes, the action on mine is improved. However, I probably could have avoided taking it apart had I known about the how the stop pins screws affected the action. Just loosening those would have gotten me to the same end result.

If anyone does loosen them, I recommend removing each one, applying purple or blue thread locker so you don't have to keep adjusting and no screws are lost.
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
User avatar
Buddafucco
Member
Posts: 3562
Joined: Sun Sep 29, 2019 10:20 am
Location: Tampa Bay, USA

Re: 2022 P.I.T.S Sprint!

#195

Post by Buddafucco »

Back at Spyderco.com... https://www.spyderco.com/catalog/detail ... t-Run/2313

If you're on the fence... I wouldn't expect this to restock again. Although i didn't expect this restock either.

Edit: Gone again
Last edited by Buddafucco on Wed Sep 07, 2022 11:33 am, edited 1 time in total.
•• Beau
User avatar
ladybug93
Member
Posts: 8145
Joined: Tue May 15, 2018 11:20 pm

Re: 2022 P.I.T.S Sprint!

#196

Post by ladybug93 »

Buddafucco wrote:
Sat Aug 27, 2022 2:11 pm
Back at Spyderco.com... https://www.spyderco.com/catalog/detail ... t-Run/2313

If you're on the fence... I wouldn't expect this to restock again. Although i didn't expect this restock either.
when i was there last week, they told me they had five of them, but i'm sure they won't sell all of those on the website because they'll want to leave some in stock in the store.

i'm committed to not buying any more at the moment, but i'd seriously consider this one if i wasn't. it's definitely not my favorite when it comes to looks (i don't like holes in my handles), but it feels great in hand and the integrated back spring is one of the coolest slip joint designs ever.

if you think you want one, you do. don't sleep.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, K08BK, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C, MBS-26
Sildani
Member
Posts: 116
Joined: Mon Aug 08, 2016 9:03 pm

Re: 2022 P.I.T.S Sprint!

#197

Post by Sildani »

Gotta chime in. I have a Cat, a Brouwer, a Rhino, and a Chaparral Sun and Moon. Love them all.

I’ve only ever carried this knife since I’ve gotten it. Perfect ergos, light weight, excellent blade shape, and no-fuss one-handed closure.

Like others have said: get this while you can, it’s bloody amazing.
User avatar
Ranger_Ike
Member
Posts: 598
Joined: Wed Oct 13, 2021 8:21 am
Location: Southern Indiana

Re: 2022 P.I.T.S Sprint!

#198

Post by Ranger_Ike »

I agree if you are on the fence, get one. Or if you are walking by the fence. Or if you know somebody with a fence.
User avatar
Matus
Member
Posts: 1751
Joined: Thu Aug 28, 2014 10:48 pm
Location: Germany

Re: 2022 P.I.T.S Sprint!

#199

Post by Matus »

Sildani wrote:
Sat Aug 27, 2022 8:35 pm
Gotta chime in. I have a Cat, a Brouwer, a Rhino, and a Chaparral Sun and Moon. Love them all.

I’ve only ever carried this knife since I’ve gotten it. Perfect ergos, light weight, excellent blade shape, and no-fuss one-handed closure.

Like others have said: get this while you can, it’s bloody amazing.
Are you saying it has better ergos that the Brouwer? That is quite a statement - the Brouwer is amazing in this regard.
... I like weird :bug-red :bug-white-red :bug-white ...
User avatar
ChrisinHove
Member
Posts: 4194
Joined: Tue Dec 17, 2013 8:12 am
Location: 27.2046° N, 77.4977° E

Re: 2022 P.I.T.S Sprint!

#200

Post by ChrisinHove »

Matus wrote:
Sun Aug 28, 2022 3:29 am
Sildani wrote:
Sat Aug 27, 2022 8:35 pm
Gotta chime in. I have a Cat, a Brouwer, a Rhino, and a Chaparral Sun and Moon. Love them all.

I’ve only ever carried this knife since I’ve gotten it. Perfect ergos, light weight, excellent blade shape, and no-fuss one-handed closure.

Like others have said: get this while you can, it’s bloody amazing.
Are you saying it has better ergos that the Brouwer? That is quite a statement - the Brouwer is amazing in this regard.
The Brouwer is certainly better for my XL hands. It’s very a different beast from the PITS, though.
Post Reply