Show your mods!

[Mike G]

A few more shots of my para 3 with flamed titanium. I’m thinking of swapping those out and going with carbon with purple titanium dust from Aramis. If I do I’ll post an update.







[/img]

[Mike G]

And a few more of my PM2







[/img]

[Mike G]

Such a pain to post pics here by the way.

[TazKristi]

Such a pain to post pics here by the way.

Sorry to hear you feel that way, but with nearly 40K images, we have to limit file sizes (ours are larger than most on similar platforms FWIW).

There must be something you like, though. You're here after all. With more than 20 years of history on our forum, we must be doing something right.

Our forum is different than most. We have a fantastic community, and a staggering amount of information. Our members are some of the wisest, most experienced people you can find. I'm sure if you stick around and read a little more, you'll find enough value to outweigh any negative.

Kristi

[Ramonade]

I see the images pretty well btw. I click on them and boom they are full size ^^

[BOOMER52]

[Manixguy@1994]

Thank you Boomer52 , scales are so beautiful. MG2

[Mike G]

Put a different clip on to try and highlight the hardware a bit more. Purple

[BOOMER52]

I went back and tweaked my 3D model of my Endela/Military PROMOD and generated a new CAM file to increase the cross section contours and this is the first set of scales off the CNC using the tweaked machining file...

Orange G10 with charcoal G10 back spacer. They came out superb...!

[JonLeBlanc]

Love your work, Boomer!

[Manixguy@1994]

Delica ZDP189 with green G10 scales . MG2

[Woodpuppy]

Did my first Delica scale swap, wow what a PITA. That lockbar just wants to slam shut on the delicate washers, and the spring wants to attain orbit! I had to use an ax head as an anvil and hammer out a washer flat twice I’m ashamed to say

I finally used some quick clamps to hold things together long enough to wiggle the washers and blade into place. Whew.

[backtrail540]

[kobold]

Amboyna, cedar, yew (and birdseye maple on the Chap).

[Manixguy@1994]

I went back and tweaked my 3D model of my Endela/Military PROMOD and generated a new CAM file to increase the cross section contours and this is the first set of scales off the CNC using the tweaked machining file...

Orange G10 with charcoal G10 back spacer. They came out superb...!

Sorry this is late , scales look fantastic. MG2

[BOOMER52]

Here's a second set of layered G10 using the tweaked CAM file for my 3D PROMOD Endela/Military..

[Ngati Pom]

Here's a second set of layered G10 using the tweaked CAM file for my 3D PROMOD Endela/Military..

Really liking the newer contoured scales.

[BOOMER52]

Designed another full contour modified profile for the Delica... Nachtkraft...

[40mm]

Cricket
Untitled by Six Pound Cat, on FlickrUntitled by Six Pound Cat, on Flickr

[BOOMER52]

Delica full contour orange TeroTuf scales and back spacer...